witeg Labortechnik GmbH

VISCOMETERS,L.283 MM, F.TRANSP.LIQUIDS CAPILLARY: 4C,RANGE cST 6000-30000 MMS/S K:30,0 NON-CALIBRATED, THREE TUBES

VISCOMETERS ASTM D445 AND D446 ISO 3104 - 8 589 111

VISCOMETERS ASTM D445 AND D446, ISO 3104, 3105. L. 283 MM, FOR USE WITH TRANSPARENT LIQUIDS NR: 3C, K. 3,000, RANGE cST: 600-3000 MM2/S CALIBRATED, THREE TUBES

VISCOMETERS ASTM D445 AND D446 ISO 3104 - 8 589 114

VISCOMETERS ASTM D445 AND D446, ISO 3104, 3105, L. APPROX. 283 MM FOR USE WITH TRANSPARENT LIQUIDS NR: 4C, K. 30,000, RANGE cST: 6000-30000 MM2/S CALIBRATED, THREE TUBES

CORK LABORATORY RINGS TOP DIAM. 170MM - 9 302 004

CORK LABORATORY RINGS, TOP DIAM. 170MM, BOTTOM DIAM. 120 MM FOR FLASKS ROUND BOTTOM 6000 - 10000 ML

Vacuum aspiration system Vacmax, integrated vacuum pump with vacuum control - 5 429 600

Ideal for:

designed for laboratory waste recovery and separation of liquid and solid
can be widely used in cell culture, DNA extraction, micro plate waste removal, and any other liquid separation or recovery

Features:

vacuum power can be set to different levels to achieve 1 ml/S to 15 ml/S aspiration speed (liquid 1 – 17 ml/S)
sensitive level sensor to prevent liquid overflow during operation
fully autoclavable waste collection bottle, tubing and handle.
lid, tubing and handle are easy to disassemble, clean and autoclave
wide range of adapters to fit tube, micro plate and disk plate for various tasks
interchangeable hand operator – tip adapters make it suitable for various tasks from single channel to 8-channel based on the applications in tube, micro plate, disk plate, etc.
including a hydrophobic filter 0.45 μm, Ø6 mm
pump noise less than 65 dB (A)
CE certified and unique serial number for tracing

Gas bell grad. 600:5 ml - 2 975 000

Gas bell, grad. 600:5 ml, resistant diffici grad., compl. with jar and stop cock connector, rubber stopper

Gas bell grad. 600:5 ml - 2 975 001

Gas bell, grad. 600:5 ml

Spinner flasks "BIOGEN" 6000 ml - 5 529 006

Spinner flasks "BIOGEN", 6000 ml, center neck screw cap 110 mm, sidearms screw cap 45 mm, o.d. 200 mm, h. 420 mm

ADJUSTABLE HANGING BAR SPINNER FLASKS 6000 ML - 5 529 028

ADJUSTABLE HANGING BAR SPINNER FLASKS 6000 ML, CENTERNECK SCREW CAP 110 MM, SIDEARM SCREW CAPS 45 MM

ADJUSTABLE HANGING BAR SPINNER FLASKS 6000 ML - 5 529 107

ADJUSTABLE HANGING BAR SPINNER FLASKS 6000 ML, WITH SILICONERUBBER STOPPER "BIOGEN" GL 45, STOPPER NO. 14

Reservoir bottle for spinner flask 6000 ml - 5 529 206

Reservoir bottle for spinner flask, 6000 ml, center neck GL100, 2 side necks GL45

Microliter pipettes Witopet premium Starter-Kit - 5 402 600 P

Looking for the latest pipetting innovation at an attractive price? WITOPET premium is just the right pipette for you. The ergonomic designed pipette of optimal weightiness requires extremely low pipetting forces making even prolonged pipetting as comfortable as possible. Other innovative features are the adjustable tip ejector button and the built-in volume locking. Moreover, WITOPET premium is characterized by superior accuracy and precision. Our error ranges are better than those required by DIN EN ISO 8655-2.

Your advantage at a glance:

highest quality, made in France
best in its class performance, most competitive price
highest accuracy and precision, our error ranges are better than the DIN EN ISO 8655-2 requirements
extremely light weightiness, while the robustness still remains
perfect ergonomics for highest comfort
extremely low pipetting forces for minimized risk of a cramp
built-in volume locking for error-free results
innovative tip ejector button, adjustable for right- and left-handed users*
secure tip ejection, made of stainless steel*
built-in recalibration mechanism (calibration tool inclusive)
8 color-coded models
soft-spring system
completely autoclavable 20 minutes at 121°C (DIN EN ISO 285)
individual certificate and serial number
DE-M marked according to the German calibration law

* 500-5000?l and 1-10ml version without tip ejector

**The mentioned results can only be achieved with matching original Gilson® Diamond Tips

Scope of supply of the Starter kit:

1 WITOPET premium 20µl
1 WITOPET premium 200 µl
1 WITOPET premium 1000 µl
1 Gilson Diamond® pipette tips D1000, Tipack 100-1000 µl
1 Gilson Diamond® pipette tips D200, Tipack 2-200 µl
3 single pipette holders
1 calibration tool
1 “2-minute inspection” poster

Beaker low form with spout

Beaker, low form
DURAN® glass
acc. to ISO 3819 (10.000 ml Non-DIN/ISO size)
with graduation (5ml and 10ml without graduation)
with spout

Artikelliste

Order number	Model	Version	Form	Material	Ideal for	Capacity	Diameter	Height(outer)	DIN
5 500 001	Beaker	with spout	low form	DURAN® glass		1000 ml	105 mm	145 mm	ISO 3819
5 500 002	Beaker	with spout	low form	DURAN® glass		2000 ml	132 mm	185 mm	ISO 3819
5 500 003	Beaker	with spout	low form	DURAN® glass		3000 ml	152 mm	210 mm	ISO 3819
5 500 005	Beaker	with spout	low form	DURAN® glass		5 ml	22 mm	30 mm	ISO 3819
5 500 010	Beaker	with spout	low form	DURAN® glass		10 ml	26 mm	35 mm	ISO 3819
5 500 025	Beaker	with spout	low form	DURAN® glass		25 ml	34 mm	50 mm	ISO 3819
5 500 050	Beaker	with spout	low form	DURAN® glass		50 ml	42 mm	60 mm	ISO 3819
5 500 051	Beaker	with spout	low form	DURAN® glass		5000 ml	170 mm	270 mm	ISO 3819
5 500 100	Beaker	with spout	low form	DURAN® glass		100 ml	50 mm	70 mm	ISO 3819
5 500 110	Beaker	with spout	low form	DURAN® glass		10000 ml	217 mm	350 mm	Non-DIN/ISO size
5 500 150	Beaker	with spout	low form	DURAN® glass		150 ml	60 mm	80 mm	ISO 3819
5 500 250	Beaker	with spout	low form	DURAN® glass		250 ml	70 mm	95 mm	ISO 3819
5 500 314	Safety stirring beaker	with rim, handle and spout		Borosilicate glass 3.3	Devices MSH-50A, MSH-50D		145 mm		DIN 12331, ISO 3819
5 500 316	Safety stirring beaker	with rim, handle and spout		Borosilicate glass 3.3	Devices from other brands		165 mm		DIN 12331, ISO 3819
5 500 400	Beaker	with spout	low form	DURAN® glass		400 ml	80 mm	110 mm	ISO 3819
5 500 600	Beaker	with spout	low form	DURAN® glass		600 ml	90 mm	125 mm	ISO 3819
5 500 800	Beaker	with spout	low form	DURAN® glass		800 ml	100 mm	135 mm	ISO 3819

low form with spout with witeg logo

made of borosilicate glass 3.3
according to DIN 12331, ISO 3819
with graduation (5ml and 10ml only at maximal capacity)

Artikelliste

Order number	Model	Version	Diameter (outer)	Form	Material	Capacity	Diameter	Graduation	Height(outer)	DIN
5 500 001 B	Beaker	with witeg logo and spout	106mm	low form	Borosilicate glass 3.3	1000 ml	106mm		145 mm	DIN 12331, ISO 3819
5 500 002 B	Beaker	with witeg logo and spout	132 mm	low form	Borosilicate glass 3.3	2000 ml	132 mm		158 mm	DIN 12331, ISO 3819
5 500 003 B	Beaker	with witeg logo and spout	153 mm	low form	Borosilicate glass 3.3	3000 ml	153 mm		210 mm	DIN 12331, ISO 3819
5 500 005 B	Beaker	with witeg logo and spout	22 mm	low form	Borosilicate glass 3.3	5 ml	22 mm	only at maximal capacity	30 mm	DIN 12331, ISO 3819
5 500 010 B	Beaker	with witeg logo and spout	26 mm	low form	Borosilicate glass 3.3	10 ml	26 mm	only at maximal capacity	35 mm	DIN 12331, ISO 3819
5 500 025 B	Beaker	with witeg logo and spout	32 mm	low form	Borosilicate glass 3.3	25 ml	32 mm	yes	48 mm	DIN 12331, ISO 3819
5 500 050 B	Beaker	with witeg logo and spout	39 mm	low form	Borosilicate glass 3.3	50 ml	39 mm	yes	55 mm	DIN 12331, ISO 3819
5 500 051 B	Beaker	with witeg logo and spout		low form	Borosilicate glass 3.3	5000 ml		yes		DIN 12331, ISO 3819
5 500 100 B	Beaker	with witeg logo and spout	51 mm	low form	Borosilicate glass 3.3	100 ml	51 mm	yes	71 mm	DIN 12331, ISO 3819
5 500 110 B	Beaker	with witeg logo and spout	217 mm	low form	Borosilicate glass 3.3	10000 ml	217 mm	yes	350 mm	DIN 12331, ISO 3819
5 500 150 B	Beaker	with witeg logo and spout	55 mm	low form	Borosilicate glass 3.3	150 ml	55 mm	yes	81 mm	DIN 12331, ISO 3819
5 500 250 B	Beaker	with witeg logo and spout	69 mm	low form	Borosilicate glass 3.3	250 ml	69 mm	yes	95 mm	DIN 12331, ISO 3819
5 500 400 B	Beaker	with witeg logo and spout	82 mm	low form	Borosilicate glass 3.3	400 ml	82 mm	yes	100 mm	DIN 12331, ISO 3819
5 500 600 B	Beaker	with witeg logo and spout	92 mm	low form	Borosilicate glass 3.3	600 ml	92 mm	yes	115 mm	DIN 12331, ISO 3819
5 500 800 B	Beaker	with witeg logo and spout	98 mm	low form	Borosilicate glass 3.3	800 ml	98 mm	yes	136 mm	DIN 12331, ISO 3819

low form with spout neutral

made of borosilicate glass 3.3
according to DIN 12331, ISO 3819
with graduation

Artikelliste

Order number	Model	Version	Form	Material	Capacity	Diameter	Graduation	Height(outer)	DIN
5 500 001 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	1000 ml	106 mm	yes	145 mm	DIN 12331, ISO 3819
5 500 002 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	2000 ml	132 mm	yes	185 mm	DIN 12331, ISO 3819
5 500 003 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	3000 ml	153 mm	yes	210 mm	DIN 12331, ISO 3819
5 500 005 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	5 ml	22 mm	yes	30 mm	DIN 12331, ISO 3819
5 500 010 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	10 ml	26 mm	yes	35 mm	DIN 12331, ISO 3819
5 500 025 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	25 ml	32 mm	yes	48 mm	DIN 12331, ISO 3819
5 500 050 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	50 ml	39 mm	yes	55 mm	DIN 12331, ISO 3819
5 500 051 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	5000 ml	170 mm	yes	270 mm	DIN 12331, ISO 3819
5 500 100 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	100 ml	50 mm	yes	70 mm	DIN 12331, ISO 3819
5 500 110 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	10000 ml	217 mm	yes	350 mm	DIN 12331, ISO 3819
5 500 150 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	150 ml	55 mm	yes	81 mm	DIN 12331, ISO 3819
5 500 250 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	250 ml	69 mm	yes	95 mm	DIN 12331, ISO 3819
5 500 400 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	400 ml	82 mm	yes	100 mm	DIN 12331, ISO 3819
5 500 600 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	600 ml	92 mm	yes	115 mm	DIN 12331, ISO 3819
5 500 800 S	Beaker	neutral, with spout	low form	Borosilicate glass 3.3	800 ml	98 mm	yes	136 mm	DIN 12331, ISO 3819

Beaker tall form with spout

Beaker, tall form
DURAN® glass
acc. to DIN 12331, ISO 3819
with graduation

Artikelliste

Order number	Model	Version	Form	Material	Capacity	Diameter	Graduation	Height(outer)	DIN
5 502 001	Beaker	with spout	tall form	DURAN® glass	1000 ml	95 mm	yes	180 mm	DIN 12331, ISO 3819
5 502 002	Beaker	with spout	tall form	DURAN® glass	2000 ml	120 mm	yes	240 mm	DIN 12331, ISO 3819
5 502 003	Beaker	with spout	tall form	DURAN® glass	3000 ml	135 mm	yes	280 mm	DIN 12331, ISO 3819
5 502 050	Beaker	with spout	tall form	DURAN® glass	50 ml	38 mm	yes	70 mm	DIN 12331, ISO 3819
5 502 100	Beaker	with spout	tall form	DURAN® glass	100 ml	48 mm	yes	80 mm	DIN 12331, ISO 3819
5 502 150	Beaker	with spout	tall form	DURAN® glass	150 ml	54 mm	yes	95 mm	DIN 12331, ISO 3819
5 502 250	Beaker	with spout	tall form	DURAN® glass	250 ml	60 mm	yes	120 mm	DIN 12331, ISO 3819
5 502 400	Beaker	with spout	tall form	DURAN® glass	400 ml	70 mm	yes	130 mm	DIN 12331, ISO 3819
5 502 600	Beaker	with spout	tall form	DURAN® glass	600 ml	80 mm	yes	150 mm	DIN 12331, ISO 3819
5 502 800	Beaker	with spout	tall form	DURAN® glass	800 ml	90 mm	yes	175 mm	DIN 12331, ISO 3819

tall form with spout with witeg logo

made of borosilicate glass 3.3
according to DIN 12331, ISO 3819
with graduation

Artikelliste

Order number	Model	Version	Diameter (outer)	Form	Material	Capacity	Diameter	Graduation	Height(outer)	DIN
5 502 001 B	Beaker	with witeg logo and spout	95 mm	tall form	Borosilicate glass 3.3	1000 ml	95 mm	yes	185 mm	DIN 12331, ISO 3819
5 502 002 B	Beaker	with witeg logo and spout	118 mm	tall form	Borosilicate glass 3.3	2000 ml	118 mm	yes	236 mm	DIN 12331, ISO 3819
5 502 003 B	Beaker	with witeg logo and spout	135 mm	tall form	Borosilicate glass 3.3	3000 ml	135 mm	yes	280 mm	DIN 12331, ISO 3819
5 502 025 B	Beaker	with witeg logo and spout		tall form	Borosilicate glass 3.3	25 ml		yes		DIN 12331, ISO 3819
5 502 050 B	Beaker	with witeg logo and spout	38 mm	tall form	Borosilicate glass 3.3	50 ml	38 mm	yes	66 mm	DIN 12331, ISO 3819
5 502 100 B	Beaker	with witeg logo and spout	48 mm	tall form	Borosilicate glass 3.3	100 ml	48 mm	yes	80 mm	DIN 12331, ISO 3819
5 502 150 B	Beaker	with witeg logo and spout	53 mm	tall form	Borosilicate glass 3.3	150 ml	53 mm	yes	96 mm	DIN 12331, ISO 3819
5 502 250 B	Beaker	with witeg logo and spout	61 mm	tall form	Borosilicate glass 3.3	250 ml	61 mm	yes	117 mm	DIN 12331, ISO 3819
5 502 400 B	Beaker	with witeg logo and spout	70 mm	tall form	Borosilicate glass 3.3	400 ml	70 mm	yes	130 mm	DIN 12331, ISO 3819
5 502 600 B	Beaker	with witeg logo and spout	82 mm	tall form	Borosilicate glass 3.3	600 ml	82 mm	yes	143 mm	DIN 12331, ISO 3819
5 502 800 B	Beaker	with witeg logo and spout	89 mm	tall form	Borosilicate glass 3.3	800 ml	89 mm	yes	171 mm	DIN 12331, ISO 3819

tall form with spout neutral

made of borosilicate glass 3.3
according to DIN 12331, ISO 3819
with graduation

Artikelliste

Order number	Model	Version	Diameter (outer)	Form	Material	Capacity	Diameter	Graduation	Height(outer)	DIN
5 502 001 S	Beaker	neutral, with spout	95 mm	tall form	Borosilicate glass 3.3	1000 ml	95 mm	yes	185 mm	DIN 12331, ISO 3819
5 502 002 S	Beaker	neutral, with spout	118 mm	tall form	Borosilicate glass 3.3	2000 ml	118 mm	yes	236 mm	DIN 12331, ISO 3819
5 502 003 S	Beaker	neutral, with spout	135 mm	tall form	Borosilicate glass 3.3	3000 ml	135 mm	yes	280 mm	DIN 12331, ISO 3819
5 502 025 S	Beaker	neutral, with spout		tall form	Borosilicate glass 3.3	25 ml		yes		DIN 12331, ISO 3819
5 502 050 S	Beaker	neutral, with spout	38 mm	tall form	Borosilicate glass 3.3	50 ml	38 mm	yes	66 mm	DIN 12331, ISO 3819
5 502 100 S	Beaker	neutral, with spout	48 mm	tall form	Borosilicate glass 3.3	100 ml	48 mm	yes	80 mm	DIN 12331, ISO 3819
5 502 150 S	Beaker	neutral, with spout	53 mm	tall form	Borosilicate glass 3.3	150 ml	53 mm	yes	96 mm	DIN 12331, ISO 3819
5 502 250 S	Beaker	neutral, with spout	61 mm	tall form	Borosilicate glass 3.3	250 ml	61 mm	yes	117 mm	DIN 12331, ISO 3819
5 502 400 S	Beaker	neutral, with spout	70 mm	tall form	Borosilicate glass 3.3	400 ml	70 mm	yes	130 mm	DIN 12331, ISO 3819
5 502 600 S	Beaker	neutral, with spout	82 mm	tall form	Borosilicate glass 3.3	600 ml	82 mm	yes	143 mm	DIN 12331, ISO 3819
5 502 800 S	Beaker	neutral, with spout	89 mm	tall form	Borosilicate glass 3.3	800 ml	89 mm	yes	171 mm	DIN 12331, ISO 3819

Laboratory bottles with screw thread amber stained borosilicate glass 3.3 witeg-Logo

laboratory bottles, round form
with screw thread and graduation
made of borosilicate glass 3.3
amber stained
with ID code

Artikelliste

Order number	Model	Version	Diameter (outer)	Color	Thread	Material	Capacity	Diameter	Height(outer)
5 528 001 B	Laboratory bottles	with witeg logo and ID code	101 mm	amber glass	GL45	Borosilicate glass 3.3	1000 ml	101 mm	225 mm
5 528 002 B	Laboratory bottles	with witeg logo and ID code	136 mm	amber glass	GL45	Borosilicate glass 3.3	2000 ml	136 mm	260 mm
5 528 005 B	Laboratory bottles	with witeg logo and ID code	182 mm	amber glass	GL45	Borosilicate glass 3.3	5000 ml	182 mm	330 mm
5 528 010 B	Laboratory bottles	with witeg logo and ID code	227 mm	amber glass	GL45	Borosilicate glass 3.3	10000 ml	227 mm	410 mm
5 528 015 B	Laboratory bottles	with witeg logo and ID code	268 mm	amber glass	GL45	Borosilicate glass 3.3	15000 ml	268 mm	445 mm
5 528 020 B	Laboratory bottles	with witeg logo and ID code	288 mm	amber glass	GL45	Borosilicate glass 3.3	20000 ml	288 mm	505 mm
5 528 025 B	Laboratory bottles	with witeg logo and ID code	36 mm	amber glass	GL25	Borosilicate glass 3.3	25 ml	36 mm	70 mm
5 528 050 B	Laboratory bottles	with witeg logo and ID code	46 mm	amber glass	GL32	Borosilicate glass 3.3	50 ml	46 mm	87 mm
5 528 100 B	Laboratory bottles	with witeg logo and ID code	56 mm	amber glass	GL45	Borosilicate glass 3.3	100 ml	56 mm	100 mm
5 528 250 B	Laboratory bottles	with witeg logo and ID code	70 mm	amber glass	GL45	Borosilicate glass 3.3	250 ml	70 mm	138 mm
5 528 500 B	Laboratory bottles	with witeg logo and ID code	86 mm	amber glass	GL45	Borosilicate glass 3.3	500 ml	86 mm	176 mm
5 528 600 B	Laboratory bottles	with witeg logo and ID code	101 mm	amber glass	GL80	Borosilicate glass 3.3	500 ml	101 mm	152 mm
5 528 601 B	Laboratory bottles	with witeg logo and ID code	101 mm	amber glass	GL80	Borosilicate glass 3.3	1000 ml	101 mm	222 mm
5 528 602 B	Laboratory bottles	with witeg logo and ID code	136 mm	amber glass	GL80	Borosilicate glass 3.3	2000 ml	136 mm	252 mm
5 528 605 B	Laboratory bottles	with witeg logo and ID code	182 mm	amber glass	GL80	Borosilicate glass 3.3	5000 ml	182 mm	314 mm
5 528 610 B	Laboratory bottles	with witeg logo and ID code	227 mm	amber glass	GL80	Borosilicate glass 3.3	10000 ml	227 mm	389 mm
5 528 615 B	Laboratory bottles	with witeg logo and ID code	268 mm	amber glass	GL80	Borosilicate glass 3.3	15000 ml	268 mm	465 mm
5 528 620 B	Laboratory bottles	with witeg logo and ID code	228 mm	amber glass	GL80	Borosilicate glass 3.3	20000 ml	228 mm	484 mm
5 528 701 B	Laboratory bottles	with witeg logo and ID code	101 mm	amber glass	GL100	Borosilicate glass 3.3	1000 ml	101 mm	225 mm
5 528 702 B	Laboratory bottles	with witeg logo and ID code	136 mm	amber glass	GL100	Borosilicate glass 3.3	2000 ml	136 mm	255 mm
5 528 705 B	Laboratory bottles	with witeg logo and ID code	182 mm	amber glass	GL100	Borosilicate glass 3.3	5000 ml	182 mm	317 mm
5 528 710 B	Laboratory bottles	with witeg logo and ID code	227 mm	amber glass	GL100	Borosilicate glass 3.3	10000 ml	227 mm	393 mm
5 528 715 B	Laboratory bottles	with witeg logo and ID code	268 mm	amber glass	GL100	Borosilicate glass 3.3	15000 ml	268 mm	465 mm
5 528 720 B	Laboratory bottles	with witeg logo and ID code	228 mm	amber glass	GL100	Borosilicate glass 3.3	20000 ml	228 mm	488 mm

Manifold MultiVac 300-MS/600-MS 3/6 places stainless steel with stopper connections

Ideal for:

filtration for microbiology tests
chemistry experiments
general laboratory filtration

Features:

MultiVac MS is made of anodized aluminium and stainless steel
includes silicone stopper No. 8 to fit various types of filter holder
each branch permits individual control
adjustable vent valve design helps to drain residual liquid off the tube
innovative vent valve design prevents from water hammer phenomenon
quick-fit hose barb can be connected to both sides

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Diameter (outer)	Material	Ideal for	Connections	Capacity	Stopper
00829 180300-01	MultiVac 300-MS	3 branches	48 cm	13 cm	11 cm	Filter: Ø47 mm / 50 mm	Body, control valve, filter funnel, funnel support base: stainless steel SUS316; control valve, handle: anodized aluminium; stopper: silicone	Filtration for microbiology tests, chemistry experiments, general laboratory filtration	5/16 inch (8 mm)	possible funnel capacity: 100ml / 300 ml / 500 ml	No. 8
00829 180600-01	MultiVac 600-MS	6 branches	85 cm	13 cm	11 cm	Filter: Ø47 mm / 50 mm	Body, control valve, filter funnel, funnel support base: stainless steel SUS316; control valve, handle: anodized aluminium; stopper: silicone	Filtration for microbiology tests, chemistry experiments, general laboratory filtration	5/16 inch (8 mm)	possible funnel capacity: 100ml / 300 ml / 500 ml	No. 8

Manifold MultiVac 300-MB/600-MB 3/6 places stainless steel with spin-lock for stainless steel funnels

Ideal for:

filtration for microbiology tests
chemistry experiments
general laboratory filtration

Features:

MultiVac MB is made of anodized aluminium and stainless steel
compatible with different sizes of funnels
each branch permits individual control
adjustable vent valve design helps to drain residual liquid off the tube
innovative vent valve design prevents from water hammer phenomenon
quick-fit hose barb can be connected to both sides

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Diameter (outer)	Material	Ideal for	Connections	Capacity	Stopper
00829 180300-02	MultiVac 300-MB	3 branches	48 cm	13 cm	11 cm	Filter: Ø47 mm / 50 mm	Body, control valve, filter funnel, funnel support base: stainless steel SS316; control valve, handle: anodized aluminium; stopper: silicone	Filtration for microbiology tests, chemistry experiments, general laboratory filtration	5/16 inch (8 mm), Spin-lock connection	possible funnel capacity: 100ml / 300 ml / 500 ml	No. 8
00829 180600-02	MultiVac 600-MB	6 branches	85 cm	13 cm	11 cm	Filter: Ø47 mm / 50 mm	Body, control valve, filter funnel, funnel support base: stainless steel SS316; control valve, handle: anodized aluminium; stopper: silicone	Filtration for microbiology tests, chemistry experiments, general laboratory filtration	5/16 inch (8 mm), Spin-lock connection SF type	possible funnel capacity: 100ml / 300 ml / 500 ml	No. 8

Büchner funnel PP 6000ml filter Ø240mm - 7 048 008

Büchner funnel, PP, 6000 ml, filter Ø 240 mm, hole Ø 3 mm, stem length 143 mm, suitable for food

Bottle-top dispenser and digital burette Thread adapter

Artikelliste

Order number	Model	Thread	Material	Ideal for
5 377 022	Thread adapter	A22	PP	Labmax, Titrex, Minispensor
5 377 025	Thread adapter	A25	PP	Labmax, Titrex, Minispensor
5 377 028	Thread adapter	A28	PP	Labmax, Titrex, Minispensor
5 377 030	Thread adapter	A30	PP	Labmax, Titrex, Minispensor
5 377 032	Thread adapter	A32/A28	PP	Minispensor
5 377 038	Thread adapter	A38	PP	Labmax, Titrex, Minispensor
5 377 040	Thread adapter	A40	PP	Labmax, Titrex, Minispensor
5 497 600	Thread adapter	A45/A32	PP	Labmax, Titrex
5 377 045	Thread adapter	A45	PP	Labmax, Titrex, Minispensor

Rotary evaporator witegvapor diagonal or vertical 180°C 20-280rpm 30-5000ml

Ideal for:

all distilling applications with high vacuum pressure

Features:

special glassware for greaseless usage
diagonal and vertical model
digital display
for flasks from 50 - 3,000 ml
speed range from 20 - 280 rpm
easy height control by accurate motor with up/down buttons
double-binding PTFE and NBR nitrile vacuum seal
anti-abrasion, anti-aging, anti-chemical
leaning angle can be adjusted
included water bath is made of stainless steel

Safety mechanism:

insulated heater
double-jacketed bath body
low water level detection and automatic stop function

Controller:

built-in digital controller with LCD display

Artikelliste

Order number	Model	Height (inner)	Diameter (inner)	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Speed	Temperature range	Packing size
2 600 000	witegvapor diagonal	120 mm	Ø245 mm	730 mm	410 mm	630 mm	Bath: stainless steel SUS304	Flasks from 50 to 3000 ml	20 - 280 rpm	up to 180°C	800 x 600 x 600 mm
2 610 000	witegvapor vertical	120 mm	Ø245 mm	620 mm	410 mm	870 mm	Bath: stainless steel SUS304	Flasks from 50 to 3000 ml	20 - 280 rpm	up to 180°C	800 x 600 x 600 mm

Rotary evaporator Accessories and spare parts

Artikelliste

Order number	Model	Version	Length (outer)	Form	Thread	Cone (ST)	Synthetic coating	Material	Ideal for	Packaging unit	Socket (ST)	Capacity	Socket
0 131 329	Joint clamp							POM	Evaporator witegvapor	10 pcs.			ST 29/32 - 29/42
2 600 0072	witegvapor duct		200 mm			ST 24/29		Glass	Evaporator witegvapor
2 600 040	Duct screw cap								Evaporator witegvapor
2 600 041	Condenser screw coupling								Evaporator witegvapor
2 600 042	Condenser holder spring								Evaporator witegvapor
2 600 018	Vacuum seal								Evaporator witegvapor
2 600 009	Assembly condenser	1200 cm2 coiling surface			SVS-tubing connection GL14				Evaporator witegvapor
2 600 044	Vacuum connector								Evaporator witegvapor
2 600 010	Vacuum stopcock	with PTFE-tube							Evaporator witegvapor
2 600 019	Drawing PTFE hose								Evaporator witegvapor
2 600 020	Inner temperature sensor								Evaporator witegvapor (mounting on cooler)
0 644 500 ROT	Receiver flask	Rotulex KS 35/20		round			no	borosilicate glass 3.3	Evaporator witegvapor			500 ml
0 133 035	Receiving flask clamp	with screw, KS 35/20							Spherical joints
2 600 045	Stopper					ST 29			Evaporator
2 600 0071 TEF	witegvapor duct		312 mm			ST 24/29		PTFE	Evaporator witegvapor
2 600 0072 TEF	witegvapor duct		200 mm					PTFE	Evaporator witegvapor
2 600 0071	witegvapor duct		312 mm					Glass	Evaporator witegvapor
1 430 400	Four neckbulb	4 times				4 x ST 14			Flasks		ST 24
0 510 002	Expansion adapter					ST 14/23					ST 24/29
0 510 006	Expansion adapter					ST 24/29					ST 29/32
1 430 224	Anti-foaming trap		100 mm			ST 24/29			Flasks		ST 24/29	250 ml
1 430 230	Anti-foaming trap		250 mm			ST 25			Flasks		ST 25
1 430 190	Anti-foaming trap		100 mm			ST 29			Flasks		ST 29
1 430 200	Anti-foaming trap	PRECISO	250 mm			ST 29/32		made of DURAN® tubing	rotary evaporator safety trap, 500 ml flask		ST 29/32
0 644 100 ROT	Receiver flask	KS35 Rotulex										100 ml
0 644 250 ROT	Receiver flask	KS35 Rotulex										250 ml
0 644 001 ROT	Receiver flask	KS35 Rotulex										1000 ml
0 644 002 ROT	Receiver flask	KS35 Rotulex										2000 ml
0 644 003 ROT	Receiver flask	KS35 Rotulex										3000 ml
0 655 050 FCH-V	Evaporating flask			pear shaped							ST 29/32	50 ml
0 655 100 FCH-V	Evaporating flask			pear shaped							ST 29/32	100 ml
0 655 250 FCH-V	Evaporating flask			pear shaped							ST 29/32	250 ml
0 655 500 FCH-V	Evaporating flask			pear shaped							ST 29/32	500 ml
0 655 001 FCH-V	Evaporating flask			pear shaped							ST 29/32	1000 ml
0 655 002 FCH-V	Evaporating flask			pear shaped							ST 29/32	2000 ml
0 655 003 FCH-V	Evaporating flask			pear shaped							ST 29/32	3000 ml

The following products have been found matching your search "600": 256

Artikelliste

Artikelliste

Artikelliste

Artikelliste

Artikelliste

Artikelliste

Artikelliste

Artikelliste

Artikelliste

Artikelliste

Artikelliste

Artikelliste