The following products have been found matching your search "dia": 194

Filter

1 From 8

No results were found for the filter!

Rotary evaporator witegvapor diagonal or vertical 180°C 20-280rpm 30-5000ml

Ideal for:

all distilling applications with high vacuum pressure

Features:

special glassware for greaseless usage
diagonal and vertical model
digital display
for flasks from 50 - 3,000 ml
speed range from 20 - 280 rpm
easy height control by accurate motor with up/down buttons
double-binding PTFE and NBR nitrile vacuum seal
anti-abrasion, anti-aging, anti-chemical
leaning angle can be adjusted
included water bath is made of stainless steel

Safety mechanism:

insulated heater
double-jacketed bath body
low water level detection and automatic stop function

Controller:

built-in digital controller with LCD display

Artikelliste

Order number	Model	Height (inner)	Diameter (inner)	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Speed	Temperature range	Packing size
2 600 000	witegvapor diagonal	120 mm	Ø245 mm	730 mm	410 mm	630 mm	Bath: stainless steel SUS304	Flasks from 50 to 3000 ml	20 - 280 rpm	up to 180°C	800 x 600 x 600 mm
2 610 000	witegvapor vertical	120 mm	Ø245 mm	620 mm	410 mm	870 mm	Bath: stainless steel SUS304	Flasks from 50 to 3000 ml	20 - 280 rpm	up to 180°C	800 x 600 x 600 mm

VITON SEALS FOR FILTER PLATE DIA. 24 MM - 2 387 201

VITON SEALS FOR FILTER PLATE, DIA. 24 MM

Viton seals for filter plate dia. 50 mm - 2 387 202

Viton seals for filter plate dia. 50 mm

Viton seals for filter plate dia. 90 mm - 2 387 203

Viton seals for filter plate dia. 90 mm

Magnetic stirrer with hotplate SMHS 3/6 places 350°C 1500rpm

Ideal for:

multiple mixing and heating applications at the same time
mixing of chemical, laboratory and pharmaceutical materials
heat-sensitive procedures in microbiology and biochemistry
sample drying and general lab heating applications

Features:

each place individually adjustable
digital Jog-Dial controller for each place
up to 350°C
up to 1.500 rpm
ceramic-coated aluminium plate with 3 or 6 places 140x140 mm
heat-, chemical- and restricted acid-resistant
no liquid can get into the body
powder-coated steel body
easy to clean
30 mm stirrer bar included (3x / 6x)
up to 3 temperature probes possible (3 & 6 place-type)
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Dial controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Connections	Controller	Housing material	Speed	Heating power	Capacity	Plate size	Plate material	Temperature control resolution	Temperature range with filter	Temperature accuracy	Packing size
DH.WMH03503	SMHS-3 230 V	3 stirring points	240 mm	510 mm	100 mm	3 temperature sensor ports, 3 stand rod sockets	Digital	Powder-coated steel	80 - 1500 rpm	3 x 400 W	20 l	140 x 140 mm (each place)	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	350°C	±0.3°C	540 x 330 x h170 mm
DH.WMH03506	SMHS-6 230 V	6 (2x3) stirring points	410 mm	510 mm	180 mm	3 temperature sensor ports, 6 stand rod sockets	Digital	Powder-coated steel	80 - 1500 rpm	6 x 400 W	20 l	140 x 140 mm (each place)	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	350°C	±0.3°C	570 x 540 x h230 mm

Dry bath (Incubator) H-20 1 block up to 150°C

Ideal for:

enzyme reactions, inactivation of sera, incubation and other laboratory procedures
multifunctional dry block heater

Features:

user‘s self-compensation function to offset between real temperature and indicated temperature (±10.0°C)
ergonomic, compact design and modular block
internal PPS bath ensures best insulation, block made of anodized aluminium
precise temperature control
digital timer function – delay time and operation control
convenient integrated timer for time-sensitive incubations
block removal tool with screw thread included
storage function for the set values of temperature and timer
various block types (optional)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

digital fuzzy controller with Jog-Dial and main touch button

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Power consumption	Temperature range	Temperature accuracy	Packing size	Sensor
DH.WHB02000	H-20 Einheit 230 V		90 mm	120 mm	60 mm	226 mm	178 mm	138 mm	approx. 5°C/min	300 W	Room temperature +5°C to 150°C	±0.1°C at 37°C, ±0.2°C to 90°C, ±0.4°C at 135°C	230 x 290 x 245 mm	Temperature sensor PT100
DH.WHB02100	H-20 Set 230 V	incl. standard block with 48 holes for 1.5/2 ml centrifuge tubes	90 mm	120 mm	60 mm	226 mm	178 mm	138 mm	approx. 5°C/min	300 W	Room temperature +5°C to 150°C	±0.1°C at 37°C, ±0.2°C to 90°C, ±0.4°C at 135°C	230 x 355 x 245 mm	Temperature sensor PT100

Baths WSB Shaking water bath 18/30/45 Liter 100°C ±0,1°C

Ideal for:

direct immersion of samples for shaking in the field of biotechnology and laboratories, hybridization applications, cell cultures, cell aeration, increasing solubility rates, molecular biology assays and bacterial vultures

Features:

stainless steel interior and bath, powder-coated steel body, double painted & baked body, 20 mm polyurethane-insulation
high-performance shaking engine ensures best smoothly shaking motion, minimum noise and vibration
universal stainless steel spring rack included: for various kind of flasks and tubes (up to 2l), easy to disassemble
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
drain valve mounted
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection

Controller:

Jog-Dial controller (turn + push)
digital feedback controller for precise speed control
digital fuzzy controller for precise temperature control

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Capacity	Shaking speed	Shaking stroke	Power consumption	Temperature range	Temperature fluctuation	Temperature accuracy	Packing size	Sensor
DH.WSB03018	WSB-18 230 V	max. quantity of Erlenmeyer flasks: 6 x 250 ml, 4 x 500 ml, 1 x 1000 ml	300 mm	300 mm	200 mm	563 mm	353 mm	340 mm	18 l	20 - 250 rpm, 1 rpm-display, 1 rpm-control	20 mm (other strokes on request)	1400 W	Room temperature +5°C - 100°C	±0.5°C at -20°C	±0.1°C	620 x 420 x 450 mm	Temperature sensor PT100
DH.WSB03030	WSB-30 230 V	max. quantity of Erlenmeyer flasks: 10 x 250 ml, 8 x 500 ml, 3 x 1000 ml	500 mm	300 mm	200 mm	763 mm	353 mm	340 mm	30 l	20 - 250 rpm, 1 rpm-display, 1 rpm-control	20 mm (other strokes on request)	1800 W	Room temperature +5°C - 100°C	±0.5°C at -20°C	±0.1°C	820 x 420 x 450 mm	Temperature sensor PT100
DH.WSB03045	WSB-45 230 V	max. quantity of Erlenmeyer flasks: 18 x 250 ml, 15 x 500 ml, 8 x 1000 ml	600 mm	380 mm	200 mm	863 mm	433 mm	340 mm	45 l	20 - 250 rpm, 1 rpm-display, 1 rpm-control	20 mm (other strokes on request)	2400 W	Room temperature +5°C - 100°C	±0.5°C at -20°C	±0.1°C	920 x 500 x 450 mm	Temperature sensor PT100

Incubators WIG gravity-air 32/50/105/155 Liter 70°C

Ideal for:

microorganism culture, animal and plant cell culture, constant temperature, germination, etc.

Features:

gravity-air flow preventing cross contamination of samples
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
ambient to 70°C of temperature range, fluctuation of ±0.2°C at 37°C, ±0.3°C at 50°C
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
controller SW can be upgraded through USB port
RS232C interface for monitoring and controlling (WireRemote)
storage function for the set values of temperature and timer
alarm function: error status and timer end
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and locking mode

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Hole diameter	Holes	Power consumption	Temperature variation	Temperature control resolution	Temperature range	Temperature fluctuation	Packing size	Recovery time	Sensor
DH.WIG03032	WIG-32 230 V	312 mm	290 mm	360 mm	458 mm	477 mm	624 mm	25 min. to 37°C, 40 min. to 50°C	2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	150 W	32 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	159 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	568 x 592 x 698 mm	8 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIG03050	WIG-50 230 V	370 mm	350 mm	420 mm	518 mm	537 mm	701 mm	25 min. to 37°C, 40 min. to 50°C	2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	200 W	50 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	169.9 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	628 x 652 x 775 mm	8 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIG03105	WIG-105 230 V	485 mm	410 mm	535 mm	635 mm	595 mm	841 mm	25 min. to 37°C, 40 min. to 50°C	2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	300 W	105 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	292.9 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	731 x 710 x 1018 mm	10 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100
DH.WIG03155	WIG-115 230 V	550 mm	475 mm	600 mm	700 mm	660 mm	906 mm	30 min. to 37°C, 40 min. to 50°C	2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	400 W	155 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	420.5 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	796 x 775 x 1083 mm	10 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100

Incubators WIF forced-air 50/105/155 Liter 70°C

Ideal for:

microorganism culture, animal and plant cell culture, constant temperature, germination, etc.

Features:

optimized air flow by forced-air mechanism
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
ambient to 70°C of temperature range, accuracy of ±0.2°C at 37°C, ±0.3°C at 50°C
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
RS232C interface for monitoring and controlling (WireRemote) storage function for the set values of temperature and timer
alarm function: error status and timer end
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and locking mode

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Hole diameter	Holes	Power consumption	Temperature variation	Temperature control resolution	Temperature range	Temperature fluctuation	Packing size	Recovery time	Sensor
DH.WIF03050	WIF-50 230 V	370 mm	350 mm	419 mm	518 mm	637 mm	700 mm	17 min. to 37°C, 28 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	200 W	50 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	216.3 W	±0.5°C at 37°C, ±0.9°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	628 x 752 x 775 mm	3 min. to 37°C, 4 min. to 50°C	Temperature sensor PT100
DH.WIF03105	WIF-105 230 V	485 mm	410 mm	533 mm	635 mm	695 mm	841 mm	17 min. to 37°C, 30 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	300 W	105 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	302.9 W	±0.4°C at 37°C, ±0.7°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	710 x 731 x 1018 mm	3 min. to 37°C, 4 min. to 50°C	Temperature sensor PT100
DH.WIF03155	WIF-155 230 V	550 mm	475 mm	600 mm	700 mm	760 mm	906 mm	17 min. to 37°C, 30 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	400 W	155 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	438.1 W	±0.4°C at 37°C, ±0.7°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	731 x 810 x 1018 mm	3 min. to 37°C, 4 min. to 50°C	Temperature sensor PT100

Incubators WIR B.O.D. 150/250/420/700 Liter 0-60°C

Ideal for:

animal and plant cell culture, constant temperature, germination test, BOD test, etc.

Features:

CFC free refrigerant (R-404A)
intelligent refrigerator control prevents compressor overload
superior temperature uniformity by forced-air convection
stainless steel chamber, powder-coated body
tempered glass door to observe samples during incubation
3x PE-coated steel wire shelves included
RS232C interface for monitoring and controlling (WireRemote)
storage function for set values: timer and temperature
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection and leakage breaker

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Compressor	Refrigerant	Power consumption	Temperature variation	Temperature range	Temperature accuracy	Packing size	Recovery time	Sensor
DH.WIR03150	WIR-150 230 V	Forced-air convection	505 mm	505 mm	610 mm	640 mm	832 mm	1313 mm	20 min. to 37°C, 20 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	700 W	150 l	190 W	R-404A (CFC-free refrigerant)	1600 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	900 x 1000 x 1650 mm	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIR03250	WIR-250 230 V	Forced-air convection	505 mm	505 mm	1000 mm	640 mm	832 mm	1703 mm	20 min. to 37°C, 20 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	1000 W	250 l	250 W	R-404A (CFC-free refrigerant)	1800 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	900 x 1000 x 2040 mm	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIR03420	WIR-420 230 V	Forced-air convection	705 mm	605 mm	1000 mm	840 mm	932 mm	1753 mm	35 min. to 37°C, 35 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	1200 W	420 l	370 W	R-404A (CFC-free refrigerant)	2300 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	1100 x 1100 x 2140 mm	12 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100
DH.WIR03700	WIR-700 230 V	Forced-air convection	800 mm	700 mm	1250 mm	935 mm	1027 mm	2000 mm	35 min. to 37°C, 35 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	2000 W	700 l	370 W	R-404A (CFC-free refrigerant)	2400 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	1220 x 1220 x 2260 mm	12 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100

Drying oven WON gravity-air 32/50/105/155 Liter 230°C

Ideal for:

drying, baking, conditioning, curing, pre-heating and aging

Features:

optimized air flow by gravity-air mechanism
3-side heating ensures temperature uniformity and accuracy
ambient +5°C to 230°C range, fluctuation of ±0.5°C at 100°C
RS232C interface for monitoring and controlling (WireRemote)
stainless steel chamber
powder-coated steel body and glass wool insulation
available with viewing window (WON-W models)
new compact body design
storage function for set values of temperature and timer
backlight LCD display
2x stainless steel wire shelves included
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Heating time	Shelves	Heating power	Capacity	Hole diameter	Holes	Power consumption	Temperature variation	Temperature control resolution	Temperature range	Temperature fluctuation	Packing size	Recovery time	Sensor
DH.WON05032	WON-32 230 V		310 mm	290 mm	360 mm	458 mm	557 mm	664 mm	Drying, baking, conditioning, curing, pre-heating and aging	30 min. to 100°C, 43 min. to 150°C	2 stainless steel wire shelves included, load per shelf 16 kg	500 W	32 l	Ø35 mm	1 ventilation hole with stainless steel cap	502 W	±1.2°C at 100°C, ±2.2°C at 150°C	Control ±0.1°C	Room temperature +5°C - 230°C	±0.5°C at 100°C, ±0.6°C at 150°C	562 x 664 x 747 mm	8 min. to 100°C, 10 min. to 150°C	Temperature sensor PT100
DH.WON05050	WON-50 230 V		370 mm	350 mm	420 mm	518 mm	647 mm	724 mm	Drying, baking, conditioning, curing, pre-heating and aging	30 min. to 100°C, 45 min. to 150°C	2 stainless steel wire shelves included, load per shelf 16 kg	650 W	50 l	Ø35 mm	1 ventilation hole with stainless steel cap	674 W	±1.2°C at 100°C, ±2.2°C at 150°C	Control ±0.1°C	Room temperature +5°C - 230°C	±0.5°C at 100°C, ±0.6°C at 150°C	622 x 754 x 807 mm	8 min. to 100°C, 10 min. to 150°C	Temperature sensor PT100
DH.WON05105	WON-105 230 V		485 mm	409 mm	535 mm	653 mm	712 mm	882 mm	Drying, baking, conditioning, curing, pre-heating and aging	30 min. to 100°C, 45 min. to 150°C	2 stainless steel wire shelves included, load per shelf 16 kg	1400 W	105 l	Ø35 mm	2 ventilation holes with stainless steel cap	1390 W	±1.2°C at 100°C, ±2.2°C at 150°C	Control ±0.1°C	Room temperature +5°C - 230°C	±0.5°C at 100°C, ±0.6°C at 150°C	743 x 819 x 1068 mm	12 min. to 100°C, 10 min. to 150°C	Temperature sensor PT100
DH.WON05155	WON-155 230 V		550 mm	474 mm	600 mm	718 mm	777 mm	947 mm	Drying, baking, conditioning, curing, pre-heating and aging	35 min. to 100°C, 50 min. to 150°C	2 stainless steel wire shelves included, load per shelf 16 kg	1600 W	155 l	Ø35 mm	2 ventilation holes with stainless steel cap	1566 W	±1.2°C at 100°C, ±2.2°C at 150°C	Control ±0.1°C	Room temperature +5°C - 230°C	±0.5°C at 100°C, ±0.8°C at 150°C	808 x 884 x 1133 mm	12 min. to 100°C, 10 min. to 150°C	Temperature sensor PT100
DH.WON07105	WON-W105 230 V	with viewing window	485 mm	409 mm	535 mm	653 mm	712 mm	882 mm	Drying, baking, conditioning, curing, pre-heating and aging	30 min. to 100°C, 45 min. to 150°C	2 stainless steel wire shelves included, load per shelf 16 kg	1400 W	105 l	Ø35 mm	2 ventilation holes with stainless steel cap	1390 W	±1.2°C at 100°C, ±2.2°C at 150°C	Control ±0.1°C	Room temperature +5°C - 230°C	±0.5°C at 100°C, ±0.6°C at 150°C	743 x 819 x 1068 mm	12 min. to 100°C, 10 min. to 150°C	Temperature sensor PT100
DH.WON07155	WON-W155 230 V	with viewing window	550 mm	474 mm	600 mm	718 mm	777 mm	947 mm	Drying, baking, conditioning, curing, pre-heating and aging	35 min. to 100°C, 50 min. to 150°C	2 stainless steel wire shelves included, load per shelf 16 kg	1600 W	155 l	Ø35 mm	2 ventilation holes with stainless steel cap	1566 W	±1.2°C at 100°C, ±2.2°C at 150°C	Control ±0.1°C	Room temperature +5°C - 230°C	±0.5°C at 100°C, ±0.8°C at 150°C	808 x 884 x 1133 mm	12 min. to 100°C, 10 min. to 150°C	Temperature sensor PT100

Drying oven WOF forced-air 50/105/155 Liter 250°C

Ideal for:

drying, baking, conditioning, curing, pre-heating and aging

Features:

optimized air flow by gravity-air mechanism
3-side heating ensures temperature uniformity and accuracy
ambient +5°C to 250°C range, fluctuation of ±0.3°C at 100°C
RS232C interface for monitoring and controlling (WireRemote)
stainless steel chamber
powder-coated steel body and glass wool insulation
available with viewing window (SWON-W models)
new compact body design
storage function for set values of temperature and timer
2x stainless steel wire shelves included
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Heating time	Shelves	Heating power	Capacity	Hole diameter	Holes	Power consumption	Temperature variation	Temperature control resolution	Temperature range	Temperature fluctuation	Packing size	Recovery time	Sensor
DH.WOF05050	WOF-50 230 V		370 mm	345 mm	420 mm	518 mm	647 mm	724 mm	Drying, baking, conditioning, curing, pre-heating and aging	25 min. to 100°C, 45 min. to 150°C	2 stainless steel wire shelves included, load per shelf 16 kg	650 W	50 l	Ø35 mm	1 ventilation hole with stainless steel cap	674 W	±1°C at 100°C, 1.8°C at 150°C	Control ±0.1°C	Room temperature +5°C - 250°C	±0.3°C at 100°C, ±0.5°C at 150°C	622 x 754 x 807 mm	8 min. to 100°C, 8 min. to 150°C	Temperature sensor PT100
DH.WOF05105	WOF-105 230 V		485 mm	415 mm	535 mm	653 mm	712 mm	882 mm	Drying, baking, conditioning, curing, pre-heating and aging	25 min. to 100°C, 40 min. to 150°C	2 stainless steel wire shelves included, load per shelf 16 kg	1400 W	105 l	Ø35 mm	2 ventilation holes with stainless steel cap	1390 W	±1°C at 100°C, 1.8°C at 150°C	Control ±0.1°C	Room temperature +5°C - 250°C	±0.3°C at 100°C, ±0.5°C at 150°C	743 x 819 x 1068 mm	6 min. to 100°C, 6 min. to 150°C	Temperature sensor PT100
DH.WOF05155	WOF-155 230 V		550 mm	480 mm	600 mm	718 mm	777 mm	947 mm	Drying, baking, conditioning, curing, pre-heating and aging	25 min. to 100°C, 40 min. to 150°C	2 stainless steel wire shelves included, load per shelf 16 kg	1600 W	155 l	Ø35 mm	2 ventilation holes with stainless steel cap	1566 W	±1°C at 100°C. ±2°C at 150°C	Control ±0.1°C	Room temperature +5°C - 250°C	±0.3°C at 100°C, ±0.5°C at 150°C	808 x 884 x 1133 mm	6 min. to 100°C, 6 min. to 150°C	Temperature sensor PT100
DH.WOF07105	WOF-W105 230 V	with viewing window	485 mm	415 mm	535 mm	653 mm	712 mm	882 mm	Drying, baking, conditioning, curing, pre-heating and aging	25 min. to 100°C, 40 min. to 150°C	2 stainless steel wire shelves included, load per shelf 16 kg	1400 W	105 l	Ø35 mm	2 ventilation holes with stainless steel cap	1390 W	±1°C at 100°C, 1.8°C at 150°C	Control ±0.1°C	Room temperature +5°C - 250°C	±0.3°C at 100°C, ±0.5°C at 150°C	743 x 819 x 1068 mm	6 min. to 100°C, 6 min. to 150°C	Temperature sensor PT100
DH.WOF07155	WOF-W155 230 V	with viewing window	550 mm	480 mm	600 mm	718 mm	777 mm	947 mm	Drying, baking, conditioning, curing, pre-heating and aging	25 min. to 100°C, 40 min. to 150°C	2 stainless steel wire shelves included, load per shelf 16 kg	1600 W	155 l	Ø35 mm	2 ventilation holes with stainless steel cap	1566 W	±1°C at 100°C. ±2°C at 150°C	Control ±0.1°C	Room temperature +5°C - 250°C	±0.3°C at 100°C, ±0.5°C at 150°C	808 x 884 x 1133 mm	6 min. to 100°C, 6 min. to 150°C	Temperature sensor PT100

Drying oven WOV Vacuum oven 19/30/70 Liter 200°C 10-750mmHg

Ideal for:

drying, baking, conditioning, curing, out-glassing solids and liquids, vacuum embedding, moisture testing, plating and aging test

Features:

very easy and convenient for vacuuming and venting, easy to read vacuum gauge
high quality door sealing: high temperature grade silicone molded gasket
superior uniformity and stability
safety window: tempered safety glass 12T & polycarbonate 5T
RS232C interface for monitoring and controlling (WireRemote)
stainless steel interior, powder-coated steel body and glass wool insulation
2x aluminium shelves included
storage function for set values of alarm and timer
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection and leakage breaker

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons

Recommended vacuum pump for 18.6l- and 30l-oven: Rocker 810
Recommended vacuum pump for 70l-oven: Rocker 800/Rocker 811

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Heating time	Shelves	Heating power	Capacity	Power consumption	Temperature variation	Temperature control resolution	Temperature range	Temperature fluctuation	Vacuum range	Packing size	Sensor
DH.WOV03020	WOV-20 230 V	with vacuum inlet valve size outer Ø10 mm	265 mm	290 mm	265 mm	480 mm	475 mm	552 mm	Drying, baking, conditioning, curing, out-glassing solids and liquids, vacuum embedding, moisture testing, plating and aging test	60 min. to 100°C, 90 min. to 150°C	2 aluminium shelves included, height between shelves 87 mm	2 x 170 W, 2 x 130 W	18.6 l	600 W	±2.0°C at 100°C, ±3.0°C at 150°C	Display 1.0°C, control 1.0°C	Room temperature +5°C - 200°C	±0.5°C at 100°C & 150°C	10 - 750 mmHg, 0.63 mbar, 0.39 mbar/h	585 x 580 x 795 mm	Temperature sensor PT100
DH.WOV03030	WOV-30 230 V	with vacuum inlet valve size outer Ø10 mm	300 mm	330 mm	300 mm	515 mm	515 mm	587 mm	Drying, baking, conditioning, curing, out-glassing solids and liquids, vacuum embedding, moisture testing, plating and aging test	70 min. to 100°C, 100 min. to 150°C	2 aluminium shelves included, height between shelves 98 mm	2 x 170 W, 2 x 130 W	30 l	600 W	±2.0°C at 100°C, ±3.0°C at 150°C	Display 1.0°C, control 1.0°C	Room temperature +5°C - 200°C	±0.5°C at 100°C & 150°C	10 - 750 mmHg, 0.63 mbar, 0.39 mbar/h	620 x 620 x 830 mm	Temperature sensor PT100
DH.WOV03070	WOV-70 230 V	with vacuum inlet valve size outer Ø10 mm	400 mm	435 mm	400 mm	618 mm	620 mm	687 mm	Drying, baking, conditioning, curing, out-glassing solids and liquids, vacuum embedding, moisture testing, plating and aging test	80 min. to 100°C, 100 min. to 150°C	2 aluminium shelves included, height between shelves 133 mm	2 x 350 W, 2 x 450 W	70 l	1600 W	±2.5°C at 100°C, ±3.5°C at 150°C	Display 1.0°C, control 1.0°C	Room temperature +5°C - 200°C	±0.5°C at 100°C & 150°C	10 - 750 mmHg, 0.63 mbar, 0.39 mbar/h	725 x 720 x 930 mm	Temperature sensor PT100

Muffel furnace FP muffel furnace 3/4.5/12/14/27/63 Liter 1.000°C

Ideal for:

ash-determinations, enameling, fusions, precipitate drying

Features:

user‘s self-compensation function for temperature (±50.0°C)
resolution: 1°C, 1 min
ceramic fibre plate included
powder-coated steel body, ceramic fibre insulation, ceramic fibre exposed heating wire interior with 4-sided heating
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

safety switch for door opening
overheat and over-current protection
sensor error detection

Controller:

Jog-Dial controller (PID) with 2-way knob (turn + push), digital LCD with backlight, and two durable setting buttons
programmable: 4 patterns with 10 segments

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Heating time	Heating power	Capacity	Temperature range	Thermocouple	Packing size	Accessories
DH.WF21.P03	FP-03 230 V		130 mm	250 mm	90 mm	410 mm	480 mm	530 mm	Ash-determinations, enameling, fusions, precipitate drying	16 min. to 800°C	1400 W	3 l	300°C - 1000°C	K-type thermocouple	630 x 540 x 770 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF21.P05	FP-05 230 V		150 mm	300 mm	100 mm	440 mm	530 mm	550 mm	Ash-determinations, enameling, fusions, precipitate drying	16 min. to 800°C	1800 W	4.5 l	300°C - 1000°C	K-type thermocouple	680 x 570 x 780 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF21.P12	FP-12 230 V	Not applicable in Europe	200 mm	300 mm	200 mm	500 mm	550 mm	660 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	3600 W	12 l	300°C - 1000°C	K-type thermocouple	700 x 630 x 890 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF21.P14	FP-14 230 V	Not applicable in Europe	250 mm	350 mm	160 mm	550 mm	580 mm	620 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4000 W	14 l	300°C - 1000°C	K-type thermocouple	740 x 680 x 850 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF21.P27	FP-27 230 V	Not applicable in Europe	300 mm	300 mm	300 mm	600 mm	590 mm	760 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4600 W	27 l	300°C - 1000°C	K-type thermocouple	740 x 730 x 990 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF21.P63	FP-63 230 V	Not applicable in Europe	400 mm	400 mm	400 mm	1000 mm	730 mm	920 mm	Ash-determinations, enameling, fusions, precipitate drying	23 min. to 800°C	9000 W	63 l	300°C - 1000°C	K-type thermocouple	1160 x 900 x 1100 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF23.P12	FP-12 3 Phase		200 mm	300 mm	200 mm	500 mm	550 mm	660 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	3600 W	12 l	300°C - 1000°C	K-type thermocouple	700 x 630 x 890 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF23.P14	FP-14 3 Phase		250 mm	350 mm	160 mm	550 mm	580 mm	620 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4000 W	14 l	300°C - 1000°C	K-type thermocouple	740 x 680 x 850 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF23.P27	FP-27 3 Phase		300 mm	300 mm	300 mm	600 mm	590 mm	760 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4600 W	27 l	300°C - 1000°C	K-type thermocouple	740 x 730 x 990 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF23.P63	FP-63 3 Phase		400 mm	400 mm	400 mm	1000 mm	730 mm	920 mm	Ash-determinations, enameling, fusions, precipitate drying	23 min. to 800°C	9000 W	63 l	300°C - 1000°C	K-type thermocouple	1160 x 900 x 1100 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating

Muffel furnace FHP muffle furnace 3/45/12/14/27/63 Liter, 1.200°C

Ideal for:

ash-determinations, enameling, fusions, precipitate drying

Features:

user‘s self-compensation function for temperature (±50.0°C)
resolution: 1°C, 1 min
ceramic fibre plate included
powder-coated steel body, ceramic fibre insulation, ceramic fibre exposed heating wire interior with 4-sided heating
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

safety switch for door opening
overheat and over-current protection
sensor error detection

Controller:

Jog-Dial controller (PID) with 2-way knob (turn + push), digital LCD with backlight, and two durable setting buttons
programmable: 4 patterns with 10 segments

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Heating time	Heating power	Capacity	Temperature range	Thermocouple	Packing size	Accessories
DH.WFH22.P03	FHP-03 230 V		130 mm	250 mm	90 mm	410 mm	480 mm	530 mm	Ash-determinations, enameling, fusions, precipitate drying	16 min. to 800°C	1400 W	3 l	300°C - 1200°C	K-type thermocouple	630 x 540 x 770 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH22.P05	FHP-05 230 V		150 mm	300 mm	100 mm	440 mm	530 mm	550 mm	Ash-determinations, enameling, fusions, precipitate drying	16 min. to 800°C	1800 W	4.5 l	300°C - 1200°C	K-type thermocouple	680 x 570 x 780 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH22.P12	FHP-12 230 V	Not applicable in Europe	200 mm	300 mm	200 mm	500 mm	550 mm	660 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	3600 W	12 l	300°C - 1200°C	K-type thermocouple	700 x 630 x 890 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH22.P14	FHP-14 230 V	Not applicable in Europe	250 mm	350 mm	160 mm	550 mm	590 mm	620 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4000 W	14 l	300°C - 1200°C	K-type thermocouple	740 x 680 x 850 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH22.P27	FHP-27 230 V	Not applicable in Europe	300 mm	300 mm	300 mm	600 mm	590 mm	760 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4600 W	27 l	300°C - 1200°C	K-type thermocouple	740 x 730 x 990 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH22.P63	FHP-63 230 V	Not applicable in Europe	400 mm	400 mm	400 mm	1000 mm	730 mm	920 mm	Ash-determinations, enameling, fusions, precipitate drying	23 min. to 800°C	9000 W	63 l	300°C - 1200°C	K-type thermocouple	1160 x 900 x 1100 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH23.P12	FHP-12 3 Phase		200 mm	300 mm	200 mm	500 mm	550 mm	660 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	3600 W	12 l	300°C - 1200°C	K-type thermocouple	700 x 630 x 890 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH23.P14	FHP-14 3 Phase		250 mm	350 mm	160 mm	550 mm	580 mm	620 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4000 W	14 l	300°C - 1200°C	K-type thermocouple	740 x 680 x 850 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH23.P27	FHP-27 3 Phase		300 mm	300 mm	300 mm	600 mm	590 mm	760 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4600 W	27 l	300°C - 1200°C	K-type thermocouple	740 x 730 x 990 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH23.P63	FHP-63 3 Phase		400 mm	400 mm	400 mm	1000 mm	730 mm	920 mm	Ash-determinations, enameling, fusions, precipitate drying	23 min. to 800°C	9000 W	63 l	300°C - 1200°C	K-type thermocouple	1160 x 900 x 1100 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating

Baths WCR Circulation water bath 8/12/22/30 Liter, -25°C down to 150°C ±0,1°C

Ideal for:

connection with evaporator

Features:

stainless steel bath, polyurethane insulation of 40 mm thickness and body made of powder-coated steel
innovated refrigeration system ensures temperature performance, includes intelligent control for preventing compressor overload, CFC-free (R-404A)
innovated powerful circulation pump ensures temperature uniformity: internal and external circulation and 5 steps circulation speed
stainless steel flat lid & valve ball included, dome lid optional
RS232C interface: remote monitoring and controlling with PC
proper liquid level tag in bath
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker
low liquid level warning and automatic stop function
locking mode

Controller:

digital fuzzy controller with Jog-Dial-switch (turn + push) & capacitive touch button

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Connections	Pressure	Heating power	Capacity	Effective space	Pump performance	Temperature variation	Temperature control resolution	Temperature range	Temperature accuracy	Packing size	Refrigerator	Cooling capacity	Sensor	Flow rate
DH.WCR00408	WCR-8 230 V	175 mm	320 mm	150 mm	330 mm	474 mm	752 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1000 W	8 l	175 x 153 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	560 x 420 x 922 mm	250 W	300 W at +20°C, 200 W at 0°C, 110 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCR00412	WCR-12 230 V	230 mm	350 mm	150 mm	400 mm	523 mm	807 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1500 W	12 l	230 x 181 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	630 x 530 x 972 mm	250 W	380 W at +20°C, 250 W at 0°C, 130 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCR00422	WCR-22 230 V	290 mm	390 mm	200 mm	483 mm	563 mm	850 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2000 W	22 l	290 x 220 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	670 x 615 x 1022 mm	370 W	680 W at +20°C, 500 W at 0°C, 300 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCR00430	WCR-30 230 V	330 mm	460 mm	200 mm	494 mm	633 mm	906 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2200 W	30 l	330 x 290 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	740 x 625 x 1072 mm	560 W	850 W at +20°C, 620 W at 0°C, 400 W at -20°C	Temperature sensor PT100	25l/Min.

Baths WCL Circulation water bath 8/12/22/30 Liter, -35°C down to 150°C ±0,1°C

Ideal for:

connection with evaporator

Features:

stainless steel bath, polyurethane insulation of 40 mm thickness and body made of powder-coated steel
innovated refrigeration system ensures temperature performance, includes intelligent control for preventing compressor overload, CFC-free (R-404A)
innovated powerful circulation pump ensures temperature uniformity: internal and external circulation and 5 steps circulation speed
stainless steel flat lid & valve ball included, dome lid optional
RS232C interface: remote monitoring and controlling with PC
proper liquid level tag in bath
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker
low liquid level warning and automatic stop function
locking mode

Controller:

digital fuzzy controller with Jog-Dial-switch (turn + push) & capacitive touch button

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Connections	Pressure	Heating power	Capacity	Effective space	Pump performance	Temperature variation	Temperature control resolution	Temperature range	Temperature accuracy	Packing size	Refrigerator	Cooling capacity	Sensor	Flow rate
DH.WCL00408	WCL-8 230 V	175 mm	320 mm	150 mm	400 mm	523 mm	807 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1000 W	8 l	175 x 153 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	630 x 530 x 972 mm	370 W	500 W at +20°C, 340 W at 0°C, 200 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCL00412	WCL-12 230 V	230 mm	350 mm	150 mm	400 mm	523 mm	807 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1500 W	12 l	230 x 181 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	630 x 530 x 972 mm	370 W	530 W at +20°C, 370 W at 0°C, 210 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCL00422	WCL-22 230 V	290 mm	390 mm	200 mm	483 mm	563 mm	850 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2000 W	22 l	290 x 220 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	670 x 615 x 1022 mm	650 W	860 W at +20°C, 620 W at 0°C, 400 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCL00430	WCL-30 230 V	330 mm	460 mm	200 mm	494 mm	633 mm	906 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2200 W	30 l	330 x 290 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	740 x 625 x 1072 mm	750 W	1030 W at +20°C, 760 W at 0°C, 500 W at -20°C	Temperature sensor PT100	25l/Min.

Freeze dryer FD-8 Freeze dryer -60°C down to -90°C - DH.FRD00208

Ideal for:

wide range from pharmaceutics, biology, food industry to petrol-chemistry and semiconductor industry, etc.

Features:

ergonomic design and compact body size for all laboratory tables
allows automatic or manual process control
temperature and timer can be controlled at automatic mode
rapid integrated hot gas defrost function for quick next cycle turn-around
LED indication light in case of suitable temperature and vacuum
homogeneous temperature distribution across all shelves in dry chamber
made of stainless steel 304
backlight LCD display indicates temperature and vacuum
CE certified and unique serial number for tracing

Controller:

Jog-Dial-switch (turn + push) and touch button

Magnetic stirrer MS-500D, digital, up to 1500rpm, 200x200mm solid ceramic plate - DH.WMS04022

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials

Features:

digital display with backlight
shade motor for 80-1,500 rpm
enormous strength of magnet
high-quality solid ceramic plate 200x200 mm
heat-, chemical- and acid-resistant
no liquid can get into the body
powder-coated aluminium body
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Dial controller with touch-button for precise speed control

Stirring thermometers solid stem - 1 270 101

Stirring thermometers, solid stem, Di- Fico grad. filled with organic liquids -35 + 50¦C, DIA. 6-7 mm, L. 260 mm

Stirring thermometers solid stem - 1 270 102

Stirring thermometers, solid stem, DIFICO graduation, -10 + 50°C, dia. 6-7mm, Length: 200 mm

Stirring thermometer solid stem - 1 270 103

Stirring thermometer, solid stem, Diffico graduation, filled w. organic liquids, dia. 6-7mm, -10+110°C, length 260 mm

Stirring thermometers solid stem - 1 270 104

Stirring thermometers, solid stem, DIFICO grad. filled w. organic liquids,-10+150°C Dia. 6-7mm, L.260 mm

Standard thermometers enclosed scale - 1 271 007

Standard thermometers, enclosed scale, opal glass scale, DIFFICO-grad., mercury filling, -10+300°C, Dia. 7-8 mm., L. 340 mm

Standard thermometers enclosed scale - 1 271 009

STANDARD THERMOMETERS, ENCLOSED SCALE OPAL GLASS SCALE, DIFFICO-GRAD. MERCURY FILLING, -10+420¦C, DIA.7-8MM, L.340 MM

1 From 8