The following products have been found matching your search "inklusive": 103

Filter

1 From 5

No results were found for the filter!

Autoclave WAC-47/60/80 Liter 121°C with basket

Ideal for:

biotechnology, clinical, environmental, medical and food industry

Features:

stainless steel wire basket (2 pcs. included) and pressure vessel
powder-coated steel body
top loading sterilizer for loading of large working volume
thermal printer (record paper roll w58/ Ø 40 mm) (WAC-R)
solid and liquid mode
with casters for excellent mobility
digital backlight LCD display
digital timer function – delay time and operation time can be controlled
built-in recorder: print sterilization data (only WAC-R)
high-quality backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
automatic over pressure release valve & heat-protective lid
error alarm, power failure and temperature error
water low level detection
electronic door lock sensing system (locks the door over 80°C)

Controller:

digital fuzzy controller (fully automatic)

Artikelliste

Order number	Model	Version	Height (inner)	Diameter (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Pressure	Heating power	Capacity	Basket	Temperature range	Temperature accuracy	Packing size
DH.WAC05047P	WAC-47 230 V	Lever type sliding door/ safety electronic door closing system, PED (pressure equipment directive) certification	670 mm	Ø300 mm	700 mm	470 mm	1080 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	2000 W	47 l	Ø270 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	700 x 470 x 1,080 mm
DH.WAC05060P	WAC-60 230 V	Lever type sliding door/ safety electronic door closing system, PED (pressure equipment directive) certification	650 mm	Ø350 mm	700 mm	470 mm	1080 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	3000 W	60 l	Ø320 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	840 x 610 x 1252 mm
DH.WAC07080P	WAC-80 3 Phase	Lever type sliding door/ safety electronic door closing system, PED (pressure equipment directive) certification	650 mm	Ø400 mm	810 mm	580 mm	1140 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	2 x 2000 W	80 l	Ø370 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	950 x 730 x 1352 mm
DH.WACR2047P	WAC-R47 230 V	Lever type sliding door/ safety electronic door closing system, recorder-type: built-in recorder printer, sterilization cycle data (date, temperature, pressure, time, error status, etc.), PED (pressure equipment directive) certification	670 mm	Ø300 mm	700 mm	470 mm	1080 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	2000 W	47 l	Ø270 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	840 x 610 x 1252 mm
DH.WACR2060P	WAC-R60 230 V	Lever type sliding door/ safety electronic door closing system, recorder-type: built-in recorder printer, sterilization cycle data (date, temperature, pressure, time, error status, etc.), PED (pressure equipment directive) certification	650 mm	Ø350 mm	700 mm	470 mm	1080 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	3000 W	60 l	Ø320 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	840 x 610 x 1252 mm
DH.WACR3080P	WAC-R80 3 Phase	Lever type sliding door/ safety electronic door closing system, recorder-type: built-in recorder printer, sterilization cycle data (date, temperature, pressure, time, error status, etc.), PED (pressure equipment directive) certification	650 mm	Ø400 mm	810 mm	580 mm	1140 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	2 x 2000 W	80 l	Ø370 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	950 x 730 x 1352 mm

Bottle-top dispenser LABMAX premium

The universal dispenser LABMAX premium has a sophisticated system which allows air purging and draining without any loss of reagent! Due to the direct displacement system, LABMAX premium is ideal for crystalline solutions. We improved the adjust knob for a quick and precise volume setting. On top, we added the built-in recalibration mechanism.

Your advantage at a glance:

high-quality precision instrument, made in Germany
best in its class performance, most competitive pricing
highest accuracy and precision, our error ranges are better than the DIN EN ISO 8655-5 requirements
all-purpose dispenser, universal chemical compatibility
direct displacement piston system, ideal for crystalline solutions
built-in recalibration mechanism including calibration tool
robust and stable, made of high quality materials e.g. platinum springs
0% loss of reagent by pumping in a closed circuit
100% drip-free due to our unique anti-drip system
360° rotatable valve block for added safety
with 2 scales - for measurements in milliliter and ounces
one handed operation
flexible by using different bottle adapters
easy to clean, completely autoclavable at 121°C
telescopic suction tube included in scope of supply
individual certificate and serial number
DE-M marked according to the German calibration law

Artikelliste

Order number	Model	Thread	Systematic errors ISO	Numeric division	Random errors ISO	Volume	Volume adjustment
5 370 901	LABMAX premium 0.25-2.5ml	GL32	±0.012 ml	0.05 ml	≤0.002 ml	0.25 - 2.5 ml	Adjustment knob
5 370 902	LABMAX premium 0.5 - 5 ml	GL32	±0.03 ml	0.1 ml	≤0.005 ml	0.5 - 5.0 ml	Adjustment knob
5 370 903	LABMAX premium 1 - 10 ml	GL32	±0.06 ml	0.2 ml	≤0.01 ml	1.0 - 10.0 ml	Adjustment knob
5 370 904	LABMAX premium 2.5 - 25 ml	GL45	±0.15 ml	0.5 ml	≤0.025 ml	2.5 - 25.0 ml	Adjustment knob
5 370 905	LABMAX premium 5 - 50 ml	GL45	±0.3 ml	1 ml	≤0.05 ml	5.0 - 50.0 ml	Adjustment knob
5 370 906	LABMAX premium 10 - 100 ml	GL45	±0.5 ml	2 ml	≤0.1 ml	10.0 - 100.0 ml	Adjustment screw

Microliter pipettes Witopet premium Single-Channel

Looking for the latest pipetting innovation at an attractive price? The microliter pipette WITOPET premium is just the right pipette for you. The ergonomic designed pipette of optimal weightiness requires extremely low pipetting forces making even prolonged pipetting as comfortable as possible. Other innovative features are the adjustable tip ejector button and the built-in volume locking. Moreover, WITOPET premium is characterized by superior accuracy and precision. Our error ranges are better than those required by DIN EN ISO 8655-2.

Your advantage at a glance:

highest quality, made in France
best in its class performance, most competitive price
highest accuracy and precision, our error ranges are better than the DIN EN ISO 8655-2 requirements
extremely light weightiness, while the robustness still remains
perfect ergonomics for highest comfort
extremely low pipetting forces for minimized risk of a cramp
built-in volume locking for error-free results
innovative tip ejector button, adjustable for right- and left-handed users*
secure tip ejection, made of stainless steel*
built-in recalibration mechanism (calibration tool inclusive)
8 color-coded models
soft-spring system
completely autoclavable 20 minutes at 121°C (DIN EN ISO 285)
individual certificate and serial number
DE-M marked according to the German calibration law

* 500-5000?l and 1-10ml version without tip ejector

** The mentioned results can only be achieved with matching original Gilson® Diamond Tips.

Artikelliste

Order number	Model	Version	Autoclavable	Color	Channels	Systematic errors ISO	Systematic errors witeg	Increment	Numeric division	Random errors ISO	Random errors witeg	Volume
5 402 002 P	Witopet premium 0.2 - 2 µl	Variable	at 121°C	Orange	1	±0.08 µl	±0.03 µl	0.002 µl	0.01 µl	≤0.04 µl	≤0.014 µl	0.2 - 2 µl
5 402 010 P	Witopet premium 1 - 10 µl	Variable	at 121°C	Red	1	±0.12 µl	±0.1 µl	0.02 µl	0.1 µl	≤0.08 µl	≤0.04 µl	1 - 10 µl
5 402 020 P	Witopet premium 2 - 20 µl	Variable	at 121°C	Pale yellow	1	±0.2 µl	±0.2 µl	0.02 µl	0.1 µl	≤0.1 µl	≤0.06 µl	2 - 20 µl
5 402 100 P	Witopet premium 10 - 100 µl	Variable	at 121°C	Salmon	1	±0.8 µl	±0.8 µl	0.2 µl	1 µl	≤0.3 µl	≤0.15 µl	10 - 100 µl
5 402 200 P	Witopet premium 20 - 200 µl	Variable	at 121°C	Yellow	1	±1.6 µl	±1.6 µl	0.2 µl	1 µl	≤0.6 µl	≤0.3 µl	20 - 200 µl
5 402 901 P	Witopet premium 100 - 1000 µl	Variable	at 121°C	Blue	1	±8 µl	±8 µl	2 µl	10 µl	≤3 µl	≤1.5 µl	100 - 1000 µl
5 402 950 P	Witopet premium 500 - 5000 µl	Variable, without tip ejector	at 121°C	Purple	1	±40 µl	±30 µl	2 µl	10 µl	≤15 µl	≤8 µl	500 - 5000 µl
5 402 910 P	Witopet premium 1 - 10 ml	Witopet premium	at 121°C	Pale blue	1	±60 µl	±60 µl	20 µl	100 µl	≤30 µl	≤16 µl	1 - 10 ml

Microliter pipettes Witopet premium Multi-Channel

Looking for the latest pipetting innovation at an attractive price? WITOPET premium is just the right pipette for you. The ergonomic designed pipette of optimal weightiness requires extremely low pipetting forces making even prolonged pipetting as comfortable as possible. Other innovative features are the adjustable tip ejector button and the built-in volume locking. Moreover, WITOPET premium is characterized by superior accuracy and precision. Our error ranges are better than those required by DIN EN ISO 8655-2. WITOPET premium is available as multi-channel model with 8 and 12 channels, covering the volume range from 0.5 to 300?l.

Your advantage at a glance:

highest quality, made in France
the best in its class performance, most competitive pricing
highest accuracy and precision, our error ranges are better than the DIN EN ISO 8655-2 requirements
extremely light weightiness, while the robustness still remains
perfect ergonomic pipetting for highest comfort
extremely low forces required for minimized risk of a cramp
built-in volume locking for error-free results
innovative tip ejector button, adjustable for right- and left-handed users
secure tip ejection
built-in recalibration mechanism (calibration tool inclusive)
completely autoclavable 20 minutes at 121°C (DIN EN ISO 285)
individual certificate and serial number
DE-M marked according to the German calibration law
4 color-coded models
soft-spring system

Artikelliste

Order number	Model	Version	Autoclavable	Color	Channels	Systematic errors ISO	Systematic errors witeg	Increment	Numeric division	Random errors ISO	Random errors witeg	Volume
5 403 101 P	Witopet premium 8 x 0.5 - 10 µl	Variable	at 121°C	Red	8	±0.24 µl	±0.22 µl	0.02 µl	0.1 µl	≤0.16 µl	≤0.11 µl	8 x 0.5 - 10 µl
5 403 201 P	Witopet premium 12 x 0.5 - 10 µl	Variable	at 121°C	Red	12	±0.24 µl	±0.22 µl	0.02 µl	0.1 µl	≤0.16 µl	≤0.11 µl	12 x 0.5 - 10 µl
5 403 102 P	Witopet premium 8 x 2 - 20 µl	Variable	at 121°C	Pale Yellow	8	±0.4 µl	±0.4 µl	0.02 µl	0.1 µl	≤0.2 µl	≤0.17 µl	8 x 2 - 20 µl
5 403 202 P	Witopet premium 12 x 2 - 20 µl	Variable	at 121°C	Pale Yellow	12	±0.4 µl	±0.4 µl	0.02 µl	0.1 µl	≤0.2 µl	≤0.17 µl	12 x 2 - 20 µl
5 403 120 P	Witopet premium 8 x 20 - 200 µl	Variable	at 121°C	Yellow	8	±3.2 µl	±2.2 µl	0.2 µl	1 µl	≤1.2 µl	≤0.55 µl	8 x 20 - 200 µl
5 403 220 P	Witopet premium 12 x 20 - 200 µl	Variable	at 121°C	Yellow	12	±3.2 µl	±2.2 µl	0.2 µl	1 µl	≤1.2 µl	≤0.55 µl	12 x 20 - 200 µl
5 403 130 P	Witopet premium 8 x 20 - 300 µl	Variable	at 121°C	Green	8	±8 µl	±3.3 µl	0.2 µl	1 µl	≤3 µl	≤1.1 µl	8 x 20 - 300 µl
5 403 230 P	Witopet premium 12 x 20 - 300 µl	Witopet premium	at 121°C	Green	12	±8 µl	±3.3 µl	0.2 µl	1 µl	≤3 µl	≤1.1 µl	12 x 20 - 300 µl

Microliter pipettes Witopet premium Starter-Kit - 5 402 600 P

Your advantage at a glance:

highest quality, made in France
best in its class performance, most competitive price
highest accuracy and precision, our error ranges are better than the DIN EN ISO 8655-2 requirements
extremely light weightiness, while the robustness still remains
perfect ergonomics for highest comfort
extremely low pipetting forces for minimized risk of a cramp
built-in volume locking for error-free results
innovative tip ejector button, adjustable for right- and left-handed users*
secure tip ejection, made of stainless steel*
built-in recalibration mechanism (calibration tool inclusive)
8 color-coded models
soft-spring system
completely autoclavable 20 minutes at 121°C (DIN EN ISO 285)
individual certificate and serial number
DE-M marked according to the German calibration law

* 500-5000?l and 1-10ml version without tip ejector

**The mentioned results can only be achieved with matching original Gilson® Diamond Tips

Scope of supply of the Starter kit:

1 WITOPET premium 20µl
1 WITOPET premium 200 µl
1 WITOPET premium 1000 µl
1 Gilson Diamond® pipette tips D1000, Tipack 100-1000 µl
1 Gilson Diamond® pipette tips D200, Tipack 2-200 µl
3 single pipette holders
1 calibration tool
1 “2-minute inspection” poster

Centrifuge CF-5 Mini 5500rpm with rotors - DH.WCF00005

Ideal for:

plasmid, DNA and RNA work, miniprep kit, and many other applications

Features:

quick spin down from walls or caps of centrifuge tubes
complete set with circular fixed-angle rotor and fixed strip rotor
smooth opening of the lid by simply pressing
body and rotor made of ABS
clear and transparent lid (polycarbonate)
CE/GMP certified and unique serial number for tracing

Safety mechanism:

lid-activated on/off safety switch: close the clear lid to start and open to stop

Controller:

superior linearity for the control of stirring speed by specially designed control circuit (PWM control)

Centrifuge CF-10 High-Performance 13500rpm with rotors - DH.WCF00010

Ideal for:

plasmid, DNA and RNA work, protein work, and miniprep kit, cell culture, cell harvesting, sub-cellular separations, and many other applications

Features:

direct driven brushless DC motor, quiet operation (? 57 dB)
air cooling system
digital feedback speed control
useful exclusive spin down function
rotor lid for running and reducing noise
realize extremely compact design with small footprint
acceleration & braking times lower than 15 sec (max. speed)
storage function for the set values: RPM & time
simple operation for repetitive use of spin down function
body made of ABS, rotor made of PE, lid made of PC
backlight LCD display
CE/GMP certified and unique serial number for tracing

Safety mechanism:

safety system for motor error
safety electronic lid lock system during running

Controller:

digital feedback control with Jog-Shuttle-switch (turn + push)

Pipetting aid Witoped XP

WITOPED XP is a professional electric pipetting aid, suitable for all pipettes up to 100 ml. The special features like speed adjustable suction and dispensing buttons, the comfortable base which allows stable placing of the device inclusive attached pipette as well as the high-precision, long lasting motor make WITOPED XP an indispensable device in your laboratory.

Your advantage at a glance:

high-quality instrument, most competitive price
high-precision, durable motor
individual adjustment of suction and dispensing speed
three pipetting speeds selectable:
(F) Fast = 10 ml/s
(M) Medium = 5 ml/s
(S) Slow = 1 ml/s
(G) Gravity drain
gravity drain mode for draining out without using any motor
suitable for all pipettes up to 100 ml
handy and light weighted for fatigue-proof pipetting
tight fit of any pipette into the pipette socket
nosepiece with replaceable filter and silicone adapter
nosepiece autoclavable at 121°C
removable stand for stable holding of instrument along with attached pipette
including wall bracket
including NiMH 8,4V 200mAh battery
CE label

Artikelliste

Order number	Model	Version	Ideal for	Power supply	Packaging unit
5 380 001	Witoped XP professional 220 V	Witoped XP professional 220 V	All pipettes	220 V
5 380 002	Witoped XP professional 110 V	Witoped XP professional 110 V	All pipettes	120 V
5 380 006	Replacement one-way filter Witoped XP	Replacement one-way filter Witoped XP	Witoped XP		5 pieces
5 380 004	Replacement silicone adapter Witoped XP	Replacement silicone adapter Witoped XP	Witoped XP

Magnetic stirrer with hotplate MSH-D digital, up to 380°C, 80-1,500 rpm

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials
heat-sensitive procedures in microbiology and biochemistry
sample drying and general lab heating applications where high temperature is needed

Features:

up to 380°C
shade motor for 80-1,500 rpm
digital display with backlight
ceramic-coated aluminium plate 180x180 / 260x260 mm
heat-, chemical- and restricted acid-resistant
no liquid can get into the body
powder-coated body
easy to clean
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Shuttle controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Power supply	Version with filter	Controller	Housing material	Speed	Heating power	Capacity	Plate size	Plate material	Temperature control resolution	Temperature range	Temperature accuracy	Packing size
DH.WMH03020	MSH-20D unit 230 V	Unit, brushless motor	206 mm	307 mm	99 mm	230 V, 50/60 Hz	rectangular	Digital	Powder-coated aluminium	80 - 1500 rpm	600 W	20 l	180 x 180 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	400 x 280 x h200 mm
DH.WMH03021	MSH-20D set 230 V	Set, brushless motor	206 mm	307 mm	99 mm	230 V, 50/60 Hz	rectangular	Digital	Powder-coated aluminium	80 - 1500 rpm	600 W	20 l	180 x 180 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	400 x 280 x h200 mm
DH.WMH03022	MSH-30D unit 230 V	Unit, carbon brush motor	286 mm	387 mm	99 mm	230 V, 50/60 Hz	rectangular	Digital	Powder-coated steel	80 - 1500 rpm	1200 W	20 l	260 x 260 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	430 x 320 x h200 mm
DH.WMH03023	MSH-30D set 230 V	Set, carbon brush motor	286 mm	387 mm	99 mm	230 V, 50/60 Hz	rectangular	Digital	Powder-coated steel	80 - 1500 rpm	1200 W	20 l	260 x 260 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	430 x 320 x h200 mm

Magnetic stirrer with hotplate MSH-A analog, 70°C to 380°C, up to 1500rpm

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials
heat-sensitive procedures in microbiology and biochemistry
sample drying and general lab heating applications

Features:

70°C to 380°C
up to 1.500 rpm
ceramic-coated aluminium plate 180x180 / 260x260 mm
heat-, chemical- and restricted acid-resistant
no liquid can get into the body
powder-coated body
easy to clean
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

operation LEDs

Controller:

PWM controller

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Version with filter	Controller	Housing material	Speed	Heating power	Capacity	Plate size	Plate material	Temperature range with filter	Packing size
DH.WMH03120	MSH-20A 230 V	brushless motor	206 mm	307 mm	99 mm	rectangular	Analog	Powder-coated aluminium	1500 rpm	600 W	20 l	180 x 180 mm	Ceramic-coated aluminium	380°C	400 x 280 x h200 mm
DH.WMH03121	MSH-30A 230 V	carbon brush motor	286 mm	387 mm	99 mm	rectangular	Analog	Powder-coated steel	1500 rpm	1200 W	20 l	260 x 260 mm	Ceramic-coated aluminium	380°C	430 x 320 x h200 mm

Magnetic stirrer with hotplate SMHS 3/6 places 350°C 1500rpm

Ideal for:

multiple mixing and heating applications at the same time
mixing of chemical, laboratory and pharmaceutical materials
heat-sensitive procedures in microbiology and biochemistry
sample drying and general lab heating applications

Features:

each place individually adjustable
digital Jog-Dial controller for each place
up to 350°C
up to 1.500 rpm
ceramic-coated aluminium plate with 3 or 6 places 140x140 mm
heat-, chemical- and restricted acid-resistant
no liquid can get into the body
powder-coated steel body
easy to clean
30 mm stirrer bar included (3x / 6x)
up to 3 temperature probes possible (3 & 6 place-type)
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Dial controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Connections	Controller	Housing material	Speed	Heating power	Capacity	Plate size	Plate material	Temperature control resolution	Temperature range with filter	Temperature accuracy	Packing size
DH.WMH03503	SMHS-3 230 V	3 stirring points	240 mm	510 mm	100 mm	3 temperature sensor ports, 3 stand rod sockets	Digital	Powder-coated steel	80 - 1500 rpm	3 x 400 W	20 l	140 x 140 mm (each place)	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	350°C	±0.3°C	540 x 330 x h170 mm
DH.WMH03506	SMHS-6 230 V	6 (2x3) stirring points	410 mm	510 mm	180 mm	3 temperature sensor ports, 6 stand rod sockets	Digital	Powder-coated steel	80 - 1500 rpm	6 x 400 W	20 l	140 x 140 mm (each place)	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	350°C	±0.3°C	570 x 540 x h230 mm

Dry bath (Incubator) H-20 1 block up to 150°C

Ideal for:

enzyme reactions, inactivation of sera, incubation and other laboratory procedures
multifunctional dry block heater

Features:

user‘s self-compensation function to offset between real temperature and indicated temperature (±10.0°C)
ergonomic, compact design and modular block
internal PPS bath ensures best insulation, block made of anodized aluminium
precise temperature control
digital timer function – delay time and operation control
convenient integrated timer for time-sensitive incubations
block removal tool with screw thread included
storage function for the set values of temperature and timer
various block types (optional)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

digital fuzzy controller with Jog-Dial and main touch button

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Power consumption	Temperature range	Temperature accuracy	Packing size	Sensor
DH.WHB02000	H-20 Einheit 230 V		90 mm	120 mm	60 mm	226 mm	178 mm	138 mm	approx. 5°C/min	300 W	Room temperature +5°C to 150°C	±0.1°C at 37°C, ±0.2°C to 90°C, ±0.4°C at 135°C	230 x 290 x 245 mm	Temperature sensor PT100
DH.WHB02100	H-20 Set 230 V	incl. standard block with 48 holes for 1.5/2 ml centrifuge tubes	90 mm	120 mm	60 mm	226 mm	178 mm	138 mm	approx. 5°C/min	300 W	Room temperature +5°C to 150°C	±0.1°C at 37°C, ±0.2°C to 90°C, ±0.4°C at 135°C	230 x 355 x 245 mm	Temperature sensor PT100

Dry bath (Incubator) HB-96D 2 blocks up to 150°C

Ideal for:

enzyme reactions, inactivation of sera, incubation and other laboratory procedures
multifunctional dry block heater

Features:

user‘s self-compensation function to offset between real temperature and indicated temperature (±10.0°C)
unit made of stainless steel and powder-coated steel, block made of anodized aluminium
digital timer function
internal PPS bath ensures best insulation, block made of anodized aluminium
precise temperature control
block extraction tongs “BLE101” & block cover are included
storage function for the set values of temperature and timer
alarm function: error status and timer end
various kinds of blocks are offered (optional)
dual block and 2 molded heater (300W)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

dual digital fuzzy controller with Jog-Shuttle-switch

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Power consumption	Temperature range	Temperature accuracy	Packing size	Sensor
DH.WHB00198	HB-96D unit 230 V		90 mm	120 mm	60 mm	250 mm	285 mm	155 mm	approx. 5°C/min	600 W	Room temperature +5°C to 150°C	±0.1°C at 37°C, ±0.2°C to 90°C, ±0.4°C at 135°C	400 x 270 x 200 mm	Temperature sensor PT100
DH.WHB00199	HB-96D set 230 V	incl. 2 standard blocks with 48 holes for 1.5/2 ml centrifuge tubes	90 mm	120 mm	60 mm	250 mm	285 mm	155 mm	approx. 5°C/min	600 W	Room temperature +5°C to 150°C	±0.1°C at 37°C, ±0.2°C to 90°C, ±0.4°C at 135°C	400 x 270 x 200 mm	Temperature sensor PT100

Dry bath (Incubator) HB-R48 1 block -5°C up to 95°C

Ideal for:

enzyme reactions, inactivation of sera, incubation and other laboratory procedures

Features:

user‘s self-compensation function to offset between real temperature and indicated temperature (±10.0°C)
unit made of stainless steel and powder-coated steel, block made of anodized aluminium
2 peltier cooling modules
unit made of stainless steel and powder-coated steel, block made of anodized aluminium
block extraction tongs “BLE101” and block cover are included
molded heater (300W), PT100 sensor
storage function for the set values of temperature and timer
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

digital PID and fuzzy controller with Jog-Shuttle-switch

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Cooling time	Heating time	Power consumption	Temperature range	Temperature accuracy	Packing size
DH.WHB00248	HB-R48 unit 230 V		90 mm	120 mm	60 mm	185 mm	230 mm	220 mm	2.3°C/min. between 95°C to 25°C, 0.5°C/min. between 25°C to -5°C	approx. 5°C/min	450 W	Room temperature -5°C to 95°C	±0.1°C at 37°C, ±0.2°C to 90°C	350 x 220 x 310 mm
DH.WHB00249	HB-R48 set 230 V	incl. standard block with 48 holes for 1.5/2 ml centrifuge tubes	90 mm	120 mm	60 mm	185 mm	230 mm	220 mm	2.3°C/min. between 95°C to 25°C, 0.5°C/min. between 25°C to -5°C	approx. 5°C/min	450 W	Room temperature -5°C to 95°C	±0.1°C at 37°C, ±0.2°C to 90°C	350 x 220 x 310 mm

Heating mantles WHM multi-place (beaker or flasks)

Ideal for:

repetitive extraction (Kjeldahl, Soxhlet and other extraction procedures), laboratory reflux and distillation applications

Features:

nickel chrome heating element
coil type: acid-resistant, long life time
highly processed aluminium case offers robust standing, easy handling and usability on the magnetic stirrer
lower profile for space-saving convenience
three support rods and two hooks included
CE certified and unique serial number for tracing

Versions:

3-places heating mantle (round bottom)
6-places heating mantle for flasks and beakers (round or flat bottom)

Artikelliste

Order number	Model	Version	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Form	Controller	Vessel diameter	Vessel capacity	Power consumption	Temperature range
DH.WHM12291	WHM 230 V, 6 places	6 places	50 mm	800 mm	240 mm	110 mm	flat	individual controller for each place	Ø83 - 86 mm	250 ml / 300 ml	840 W	100°C - 450°C
DH.WHM12293	WHM 230 V, 6 places	6 places	50 mm	800 mm	240 mm	110 mm	round	individual controller for each place	Ø83 - 86 mm	250 ml / 300 ml	840 W	100°C - 450°C
DH.WHM12295	WHM 230 V, 6 places	6 places	65 mm	950 mm	270 mm	130 mm	round	individual controller for each place	Ø102 - 105 mm	500 ml	1440 W	100°C - 450°C
DH.WHM12391	WHM 230 V, 3 places	3 places	65 mm	550 mm	270 mm	130 mm	round	individual controller for each place	Ø102 - 105 mm	500 ml	720 W	100°C - 450°C
DH.WHM12393	WHM 230 V, 3 places	3 places	75 mm	690 mm	340 mm	170 mm	round	individual controller for each place	Ø130 - 131 mm	1000 ml	1050 W	100°C - 450°C

Baths WEB Extraction water bath 4/6/8 Plätze bis 100°C ±0,2°C

Ideal for:

gentle extraction, Soxhlet extraction and determination of COD

Features:

available with 4,6 or 8 extraction places
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
concentric ring cover set Ø 110 mm and stainless steel holding frame included, drain valve mounted
stainless steel interior and powder-coated steel body
storage function for the set values of temperature and timer
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection
locking mode
low water level warning and automatic stop function

Controller:

digital fuzzy controller with Jog-Shuttle-switch (turn + push)

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Power consumption	Temperature range	Temperature fluctuation	Temperature accuracy	Packing size	Sensor
DH.WEB01004	WEB-4 230 V	4 places	610 mm	160 mm	160 mm	720 mm	245 mm	275 mm	1400 W	Room temperature +5°C - 100°C	±1.0°C	±0.2°C	710 x 310 x 300 mm	Temperature sensor PT100
DH.WEB01006	WEB-6 230 V	6 places	910 mm	140 mm	160 mm	975 mm	245 mm	275 mm	1800 W	Room temperature +5°C - 100°C	±1.0°C	±0.2°C	1030 x 320 x 370 mm	Temperature sensor PT100
DH.WEB01008	WEB-8 230 V	8 places	610 mm	290 mm	160 mm	720 mm	375 mm	275 mm	2 x 1400 W	Room temperature +5°C - 100°C	±1.0°C	±0.2°C	880 x 420 x 300 mm	Temperature sensor PT100

Baths WCH Circulation water bath 8/12/22/30 Liter 250°C ±0,1°C

Ideal for:

applications at high temperature
biotechnology, clinical, environmental, medical, petroleum & food industry, pharmaceutical and industrial applications
connection with evaporators and viscometers is applicable

Features:

corrosion resistant stainless steel bath with 1.2 mm thickness
ceramic fibre insulator of 50 mm thickness and powder-coated steel body
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
digital timer function (99hr 59min): delay time and operation time can be controlled
drain valve mounted and stainless steel flat lid included
storage function for the set values of temperature and timer
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection
locking mode

Controller:

digital fuzzy controller with Jog-Shuttle-switch (turn + push)

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Connections	Pressure	Capacity	Effective space	Pump performance	Power consumption	Temperature control resolution	Temperature range	Temperature fluctuation	Temperature accuracy	Packing size	Sensor	Flow rate
DH.WCH00408	WCH-8 230 V	180 mm	320 mm	155 mm	303 mm	443 mm	569 mm	Circulation nozzle inner Ø7 x outer Ø11mm ( IØ 9 / OØ 12 mm silicon tube connection for inner circulation)	5 psi	8 l	180 x 130 x 155 mm	16 l/min, max. lift: 2.8m	1000 W	Display 0.1°C, control 0.5°C	Room temperature +5°C - 250°C	±0.2°C	±0.1°C	470 x 400 x 500 mm	Temperature sensor PT100	16l/Min.
DH.WCH00412	WCH-12 230 V	250 mm	320 mm	155 mm	373 mm	443 mm	569 mm	External circulation nozzle inner: Ø10.5mm, outer Ø12.5mm	5 psi	12 l	250 x 130 x 155 mm	16 l/min, max. lift: 2.8m	1500 W	Display 0.1°C, control 0.5°C	Room temperature +5°C - 250°C	±0.2°C	±0.1°C	470 x 400 x 500 mm	Temperature sensor PT100	16l/Min.
DH.WCH00422	WCH-22 230 V	340 mm	440 mm	155 mm	463 mm	563 mm	569 mm	External circulation nozzle inner: Ø10.5mm, outer Ø12.5mm	5 psi	22 l	340 x 250 x 155 mm	16 l/min, max. lift: 2.8m	2200 W	Display 0.1°C, control 0.5°C	Room temperature +5°C - 250°C	±0.2°C	±0.1°C	600 x 490 x 500 mm	Temperature sensor PT100	16l/Min.
DH.WCH00430	WCH-30 230 V	340 mm	440 mm	200 mm	436 mm	563 mm	614 mm	External circulation nozzle inner: Ø10.5mm, outer Ø12.5mm	5 psi	30 l	340 x 250 x 200 mm	16 l/min, max. lift: 2.8m	2500 W	Display 0.1°C, control 0.5°C	Room temperature +5°C - 250°C	±0.2°C	±0.1°C	600 x 490 x 500 mm	Temperature sensor PT100	16l/Min.

Baths WSB Shaking water bath 18/30/45 Liter 100°C ±0,1°C

Ideal for:

direct immersion of samples for shaking in the field of biotechnology and laboratories, hybridization applications, cell cultures, cell aeration, increasing solubility rates, molecular biology assays and bacterial vultures

Features:

stainless steel interior and bath, powder-coated steel body, double painted & baked body, 20 mm polyurethane-insulation
high-performance shaking engine ensures best smoothly shaking motion, minimum noise and vibration
universal stainless steel spring rack included: for various kind of flasks and tubes (up to 2l), easy to disassemble
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
drain valve mounted
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection

Controller:

Jog-Dial controller (turn + push)
digital feedback controller for precise speed control
digital fuzzy controller for precise temperature control

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Capacity	Shaking speed	Shaking stroke	Power consumption	Temperature range	Temperature fluctuation	Temperature accuracy	Packing size	Sensor
DH.WSB03018	WSB-18 230 V	max. quantity of Erlenmeyer flasks: 6 x 250 ml, 4 x 500 ml, 1 x 1000 ml	300 mm	300 mm	200 mm	563 mm	353 mm	340 mm	18 l	20 - 250 rpm, 1 rpm-display, 1 rpm-control	20 mm (other strokes on request)	1400 W	Room temperature +5°C - 100°C	±0.5°C at -20°C	±0.1°C	620 x 420 x 450 mm	Temperature sensor PT100
DH.WSB03030	WSB-30 230 V	max. quantity of Erlenmeyer flasks: 10 x 250 ml, 8 x 500 ml, 3 x 1000 ml	500 mm	300 mm	200 mm	763 mm	353 mm	340 mm	30 l	20 - 250 rpm, 1 rpm-display, 1 rpm-control	20 mm (other strokes on request)	1800 W	Room temperature +5°C - 100°C	±0.5°C at -20°C	±0.1°C	820 x 420 x 450 mm	Temperature sensor PT100
DH.WSB03045	WSB-45 230 V	max. quantity of Erlenmeyer flasks: 18 x 250 ml, 15 x 500 ml, 8 x 1000 ml	600 mm	380 mm	200 mm	863 mm	433 mm	340 mm	45 l	20 - 250 rpm, 1 rpm-display, 1 rpm-control	20 mm (other strokes on request)	2400 W	Room temperature +5°C - 100°C	±0.5°C at -20°C	±0.1°C	920 x 500 x 450 mm	Temperature sensor PT100

Incubators WIG gravity-air 32/50/105/155 Liter 70°C

Ideal for:

microorganism culture, animal and plant cell culture, constant temperature, germination, etc.

Features:

gravity-air flow preventing cross contamination of samples
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
ambient to 70°C of temperature range, fluctuation of ±0.2°C at 37°C, ±0.3°C at 50°C
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
controller SW can be upgraded through USB port
RS232C interface for monitoring and controlling (WireRemote)
storage function for the set values of temperature and timer
alarm function: error status and timer end
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and locking mode

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Hole diameter	Holes	Power consumption	Temperature variation	Temperature control resolution	Temperature range	Temperature fluctuation	Packing size	Recovery time	Sensor
DH.WIG03032	WIG-32 230 V	312 mm	290 mm	360 mm	458 mm	477 mm	624 mm	25 min. to 37°C, 40 min. to 50°C	2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	150 W	32 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	159 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	568 x 592 x 698 mm	8 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIG03050	WIG-50 230 V	370 mm	350 mm	420 mm	518 mm	537 mm	701 mm	25 min. to 37°C, 40 min. to 50°C	2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	200 W	50 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	169.9 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	628 x 652 x 775 mm	8 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIG03105	WIG-105 230 V	485 mm	410 mm	535 mm	635 mm	595 mm	841 mm	25 min. to 37°C, 40 min. to 50°C	2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	300 W	105 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	292.9 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	731 x 710 x 1018 mm	10 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100
DH.WIG03155	WIG-115 230 V	550 mm	475 mm	600 mm	700 mm	660 mm	906 mm	30 min. to 37°C, 40 min. to 50°C	2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	400 W	155 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	420.5 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	796 x 775 x 1083 mm	10 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100

Incubators SWIG gravity-air SmartLab 32/50/105/155 Liter 70°C

Ideal for:

microorganism culture, animal and plant cell culture, constant temperature, germination, etc.

Features:

gravity-air flow by natural flow preventing cross contamination of samples
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
ambient to 70°C of temperature range, fluctuation of ±0.2°Cat 37°C, ±0.3°C at 50°C
storage function for the set values of temperature and timer
alarm function: error status and timer end
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection

Controller:

Smart-Lab™ controller with 4? full touch screen TFT LCD:

WiRe™ app service, remote control system
variable program settings
self-diagnostic function
automatic data recording
data transfer to PC by USB memory
Internet connectivity with WiFi

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Hole diameter	Holes	Power consumption	Temperature variation	Temperature control resolution	Temperature range	Temperature fluctuation	Packing size	Recovery time	Sensor
DH.SWIG03032	SWIG-32 230 V	with Smart-LabTM controller	312 mm	290 mm	360 mm	458 mm	477 mm	624 mm	25 min. to 37°C, 40 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	150 W	32 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	159 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	568 x 592 x 698 mm	8 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.SWIG03050	SWIG-50 230 V	with Smart-LabTM controller	370 mm	350 mm	420 mm	518 mm	537 mm	701 mm	25 min. to 37°C, 40 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	200 W	50 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	169.9 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	628 x 652 x 775 mm	8 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.SWIG03105	SWIG-105 230 V	with Smart-LabTM controller	485 mm	410 mm	535 mm	635 mm	595 mm	841 mm	25 min. to 37°C, 40 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	300 W	105 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	292.9 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	731 x 710 x 1018 mm	10 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100
DH.SWIG03155	SWIG-115 230 V	with Smart-LabTM controller	550 mm	475 mm	600 mm	700 mm	660 mm	906 mm	30 min. to 37°C, 40 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	400 W	155 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	420.5 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	796 x 775 x 1083 mm	10 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100

Incubators WIF forced-air 50/105/155 Liter 70°C

Ideal for:

microorganism culture, animal and plant cell culture, constant temperature, germination, etc.

Features:

optimized air flow by forced-air mechanism
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
ambient to 70°C of temperature range, accuracy of ±0.2°C at 37°C, ±0.3°C at 50°C
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
RS232C interface for monitoring and controlling (WireRemote) storage function for the set values of temperature and timer
alarm function: error status and timer end
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and locking mode

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Hole diameter	Holes	Power consumption	Temperature variation	Temperature control resolution	Temperature range	Temperature fluctuation	Packing size	Recovery time	Sensor
DH.WIF03050	WIF-50 230 V	370 mm	350 mm	419 mm	518 mm	637 mm	700 mm	17 min. to 37°C, 28 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	200 W	50 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	216.3 W	±0.5°C at 37°C, ±0.9°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	628 x 752 x 775 mm	3 min. to 37°C, 4 min. to 50°C	Temperature sensor PT100
DH.WIF03105	WIF-105 230 V	485 mm	410 mm	533 mm	635 mm	695 mm	841 mm	17 min. to 37°C, 30 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	300 W	105 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	302.9 W	±0.4°C at 37°C, ±0.7°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	710 x 731 x 1018 mm	3 min. to 37°C, 4 min. to 50°C	Temperature sensor PT100
DH.WIF03155	WIF-155 230 V	550 mm	475 mm	600 mm	700 mm	760 mm	906 mm	17 min. to 37°C, 30 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	400 W	155 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	438.1 W	±0.4°C at 37°C, ±0.7°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	731 x 810 x 1018 mm	3 min. to 37°C, 4 min. to 50°C	Temperature sensor PT100

Incubators SWIF forced-air SmartLab 50/105/155 Liter 70°C

Ideal for:

microorganism culture, animal and plant cell culture, constant temperature, germination, etc.

Features:

optimized air flow by forced-air mechanism
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
ambient to 70°C of temperature range, accuracy of ±0.2°C at 37°C, ±0.3°C at 50°C
storage function for the set values of temperature and timer
alarm function: error status and timer end
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection

Controller:

Smart-Lab™ controller with 4? full touch screen TFT LCD:

WiRe™ app service, remote control system
variable program settings
self-diagnostic function
automatic data recording
data transfer to PC by USB memory
Internet connectivity with WiFi

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Hole diameter	Holes	Power consumption	Temperature variation	Temperature control resolution	Temperature range	Temperature fluctuation	Packing size	Recovery time	Sensor
DH.SWIF03050	SWIF-50 230 V	with Smart-LabTM controller	370 mm	350 mm	419 mm	518 mm	637 mm	700 mm	17 min. to 37°C, 28 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	200 W	50 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	216.3 W	±0.5°C at 37°C, ±0.9°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	628 x 752 x 775 mm	3 min. to 37°C, 4 min. to 50°C	Temperature sensor PT100
DH.SWIF03105	SWIF-105 230 V	with Smart-LabTM controller	485 mm	410 mm	533 mm	635 mm	695 mm	841 mm	17 min. to 37°C, 30 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	300 W	105 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	302.9 W	±0.4°C at 37°C, ±0.7°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	710 x 731 x 1018 mm	3 min. to 37°C, 4 min. to 50°C	Temperature sensor PT100
DH.SWIF03155	SWIF-155 230 V	with Smart-LabTM controller	550 mm	475 mm	600 mm	700 mm	760 mm	906 mm	17 min. to 37°C, 30 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	400 W	155 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	438.1 W	±0.4°C at 37°C, ±0.7°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	731 x 810 x 1018 mm	3 min. to 37°C, 4 min. to 50°C	Temperature sensor PT100

Incubators WIR B.O.D. 150/250/420/700 Liter 0-60°C

Ideal for:

animal and plant cell culture, constant temperature, germination test, BOD test, etc.

Features:

CFC free refrigerant (R-404A)
intelligent refrigerator control prevents compressor overload
superior temperature uniformity by forced-air convection
stainless steel chamber, powder-coated body
tempered glass door to observe samples during incubation
3x PE-coated steel wire shelves included
RS232C interface for monitoring and controlling (WireRemote)
storage function for set values: timer and temperature
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection and leakage breaker

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Compressor	Refrigerant	Power consumption	Temperature variation	Temperature range	Temperature accuracy	Packing size	Recovery time	Sensor
DH.WIR03150	WIR-150 230 V	Forced-air convection	505 mm	505 mm	610 mm	640 mm	832 mm	1313 mm	20 min. to 37°C, 20 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	700 W	150 l	190 W	R-404A (CFC-free refrigerant)	1600 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	900 x 1000 x 1650 mm	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIR03250	WIR-250 230 V	Forced-air convection	505 mm	505 mm	1000 mm	640 mm	832 mm	1703 mm	20 min. to 37°C, 20 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	1000 W	250 l	250 W	R-404A (CFC-free refrigerant)	1800 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	900 x 1000 x 2040 mm	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIR03420	WIR-420 230 V	Forced-air convection	705 mm	605 mm	1000 mm	840 mm	932 mm	1753 mm	35 min. to 37°C, 35 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	1200 W	420 l	370 W	R-404A (CFC-free refrigerant)	2300 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	1100 x 1100 x 2140 mm	12 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100
DH.WIR03700	WIR-700 230 V	Forced-air convection	800 mm	700 mm	1250 mm	935 mm	1027 mm	2000 mm	35 min. to 37°C, 35 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	2000 W	700 l	370 W	R-404A (CFC-free refrigerant)	2400 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	1220 x 1220 x 2260 mm	12 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100

Incubators SWIR B.O.D. SmartLab 150/250/420/700 Liter 0 to +60°C

Ideal for:

animal and plant cell culture, constant temperature, germination test, BOD test, etc.

Features:

CFC free refrigerant (R-404A)
intelligent refrigerator control prevents compressor overload
superior temperature uniformity by forced-air convection
stainless steel chamber, powder-coated body
tempered glass door to observe samples during incubation
3x PE-coated steel wire shelves included
0°C - +60°C (refrigerated)
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker

Controller:

Smart-Lab™ controller with 4? full touch screen TFT LCD:

WiRe™ app service, remote control system
variable program settings
self-diagnostic function
automatic data recording
data transfer to PC by USB memory
Internet connectivity with WiFi

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Compressor	Refrigerant	Power consumption	Temperature variation	Temperature range	Temperature accuracy	Packing size	Recovery time	Sensor
DH.SWIR03150	SWIR-150 230 V	with Smart-LabTM controller, forced-air convection	505 mm	505 mm	610 mm	640 mm	832 mm	1313 mm	20 min. to 37°C, 20 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	700 W	150 l	190 W	R-404A (CFC-free refrigerant)	1600 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	900 x 1000 x 1650 mm	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.SWIR03250	SWIR-250 230 V	with Smart-LabTM controller, forced-air convection	505 mm	505 mm	1000 mm	640 mm	832 mm	1703 mm	20 min. to 37°C, 20 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	1000 W	250 l	250 W	R-404A (CFC-free refrigerant)	1800 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	900 x 1000 x 2040 mm	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.SWIR03420	SWIR-420 230 V	with Smart-LabTM controller, forced-air convection	705 mm	605 mm	1000 mm	840 mm	932 mm	1753 mm	35 min. to 37°C, 35 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	1200 W	420 l	370 W	R-404A (CFC-free refrigerant)	2300 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	1100 x 1100 x 2140 mm	12 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100
DH.SWIR03700	SWIR-700 230 V	with Smart-LabTM controller, forced-air convection	800 mm	700 mm	1250 mm	935 mm	1027 mm	2000 mm	35 min. to 37°C, 35 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	2000 W	700 l	370 W	R-404A (CFC-free refrigerant)	2400 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	1220 x 1220 x 2260 mm	12 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100

Incubators WIM industrial 4 chambers each 125 Liter

Ideal for:

microorganism culture, animal and plant cell culture, constant temperature, germination, etc.

Features:

forced-air flow by silent fan motor implements the highest uniformity of temperature in each chamber
4x125 liter chambers
each chamber has an independent fuzzy controller for different temperature and time control
8x PE-coated steel wire shelves included
corrosion resistant stainless steel chamber, powder-coated body
tempered glass door to observe samples during incubation
storage function for the set values of temperature and timer
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

digital fuzzy controller with Jog-Shuttle-switch (turn + push)

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Heating time	Illumination	Shelves	Heating power	Capacity	Compressor	Effective space	Power consumption	Temperature variation	Temperature range	Temperature accuracy	Recovery time	Sensor
DH.WIM04125	WIM-4 230 V	4 individual chambers, forced-air convection	1655 mm	845 mm	1710 mm	15 min. to 37°C, 30 min. to 50°C		8 PE-coated steel wire shelves included	4 x 500 W	4 chambers x 125 l		500 x 500 x 500 mm (each room)	2600 W	±0.3°C at 37°C, ±0.7°C at 50°C	Room temperature +5°C - 70°C	±0.2°C to 37°C	8 min. to 37°C, 10 min. to 50°C	Temperature sensor PT100
DH.WIM14125	WIM-R4 230 V	4 individual chambers, forced-air convection, not available in Europe	1655 mm	845 mm	1710 mm	20 min. to 37°C, 30 min. to 50°C		8 PE-coated steel wire shelves included	4 x 650 W	4 chambers x 125 l	1/4 HP (4 x chambers)	500 x 500 x 500 mm (each room)	4500 W	±0.5°C at 37°C	0°C - 60°C (refrigerated)	±0.2°C to 37°C	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIM24125	WIM-RL4 230 V	4 individual chambers, forced-air convection, not available in Europe	1655 mm	845 mm	1710 mm	20 min. to 37°C, 30 min. to 50°C	2 x FRL 55 W (x 4 chambers)	8 PE-coated steel wire shelves included	4 x 650 W	4 chambers x 125 l	1/4 HP (4 x chambers)	500 x 500 x 500 mm (each room)	4800 W	±0.5°C at 37°C	0°C - 60°C (refrigerated)	±0.2°C to 37°C	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIM16125	WIM-R4 3 Phase	4 individual chambers, forced-air convection	1655 mm	845 mm	1710 mm	20 min. to 37°C, 30 min. to 50°C		8 PE-coated steel wire shelves included	4 x 650 W	4 chambers x 125 l	1/4 HP (4 x chambers)	500 x 500 x 500 mm (each room)	4500 W	±0.5°C at 37°C	0°C - 60°C (refrigerated)	±0.2°C to 37°C	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIM26125	WIM-RL4 3 Phase	4 individual chambers, forced-air convection	1655 mm	845 mm	1710 mm	20 min. to 37°C, 30 min. to 50°C	2 x FRL 55 W (x 4 chambers)	8 PE-coated steel wire shelves included	4 x 650 W	4 chambers x 125 l	1/4 HP (4 x chambers)	500 x 500 x 500 mm (each room)	4800 W	±0.5°C at 37°C	0°C - 60°C (refrigerated)	±0.2°C to 37°C	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100

1 From 5