The following products have been found matching your search "internal": 86

Filter

1 From 4

No results were found for the filter!

Water purification system WWP.POWER

Ideal for:

production of pure and ultra-pure water

Features:

with pretreatment system
with RS232C interface and volumetric dispensing function with timer, level sensor included
2-phase-display for filter exchange
backlight LCD display
filter exchange message indicated by LCD display and blinking LED light
self-diagnosis for Ext- and Int-system, automatic cleaning, automatic sensor calibration
CE certified and unique serial number for tracing

Controller:

microprocessor controller: one-touch technology

Artikelliste

Order number	Model	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Flow rate	Product water quality	Water quality display	Filter composition
DH.WWP.POWER.S	WWP.POWER Scholar	395 mm	500 mm	470 mm	production of pure and ultra pure water	15 l/h	pure water: 0.2 - 250 μS/cm, ultra pure water: up to ≤18.3 MΩ x cm	pure water: 0.2 to 250.0 μS/cm, feed water: 10 to 100 μS/cm, temperature: 0 to 99.9°C	Pretreatment system HMC-PT-3, RO Pack, 0.2 μm final filter,UP Pack (scholar)
DH.WWP.POWER.U	WWP.POWER UV	395 mm	500 mm	470 mm	production of pure and ultra pure water	15 l/h	pure water: 0.2 - 250 μS/cm, ultra pure water: up to ≤18.3 MΩ x cm	pure water: 0.2 to 250.0 μS/cm, feed water: 10 to 100 μS/cm, temperature: 0 to 99.9°C	Pretreatment system HMC-PT-3, RO Pack, 0.2 μm final filter, UP Pack (S-UV), 254/185 UV lamp
DH.WWP.POWER.B	WWP.POWER Bio	395 mm	500 mm	470 mm	production of pure and ultra pure water	15 l/h	pure water: 0.2 - 250 μS/cm, ultra pure water: up to ≤18.3 MΩ x cm	pure water: 0.2 to 250.0 μS/cm, feed water: 10 to 100 μS/cm, temperature: 0 to 99.9°C	Pretreatment system HMC-PT-3, RO Pack, 0.2 μm final filter, UP Pack (BIO), MW 5000 UF filter (M)
DH.WWP.POWER.I	WWP.POWER Integrate	395 mm	500 mm	470 mm	production of pure and ultra pure water	15 l/h	pure water: 0.2 - 250 μS/cm, ultra pure water: up to ≤18.3 MΩ x cm	pure water: 0.2 to 250.0 μS/cm, feed water: 10 to 100 μS/cm, temperature: 0 to 99.9°C	Pretreatment system HMC-PT-3, RO Pack, 0.2 μm final filter, UP Pack (INT), 254/185 UV lamp, MW 5000 UF filter (M)

INTERNAL CENTER RINGS O-RING SEALS MADE OF PTFE/PTFE VITON 10 MM VE= 1 STUECK - 0 128 310 P

INTERNAL CENTER RINGS, O-RING SEALS MADE OF PTFE/PTFE VITON, 10 MM VE= 1 STUECK

INTERNAL CENTER RINGS O-RING SEALS MADE OF PTFE/PTFE VITON 40 MM VE= 1 STUECK - 0 128 340 P

INTERNAL CENTER RINGS, O-RING SEALS MADE OF PTFE/PTFE VITON, 40 MM VE= 1 STUECK

Internal center ring 10 mm - 0 128 310

Internal center ring, 10 mm, O-Ring seals made of Perbunan / stainless steel

Internal center ring 15 mm - 0 128 315

Internal center ring, 15 mm, O-Ring seals made of Perbunan / stainless steel

Internal center ring 25 mm - 0 128 325

Internal center ring, 25 mm, O-Ring seals made of Perbunan / stainless steel

Internal center rings 40 mm - 0 128 340

Internal center rings, 40 mm, O-Ring seals made of Perbunan / stainless steel

Internal center ring 50 mm - 0 128 350

Internal center ring, 50 mm, O-Ring seals made of Perbunan / stainless steel

Internal center rings 50 mm - 0 128 350 PS

Internal center rings, 50 mm, O-ring seals made of PTFE/silicon

Internal center ring 65 mm - 0 128 365

Internal center ring, 65 mm, O-Ring Seals made of Perbunan / stainless steel

Internal center rings 90 mm - 0 128 390

Internal center rings, 90 mm, O-Ring seals made of Perbunan / stainless steel

Microliter pipettes Witopet premium Single-Channel

Looking for the latest pipetting innovation at an attractive price? The microliter pipette WITOPET premium is just the right pipette for you. The ergonomic designed pipette of optimal weightiness requires extremely low pipetting forces making even prolonged pipetting as comfortable as possible. Other innovative features are the adjustable tip ejector button and the built-in volume locking. Moreover, WITOPET premium is characterized by superior accuracy and precision. Our error ranges are better than those required by DIN EN ISO 8655-2.

Your advantage at a glance:

highest quality, made in France
best in its class performance, most competitive price
highest accuracy and precision, our error ranges are better than the DIN EN ISO 8655-2 requirements
extremely light weightiness, while the robustness still remains
perfect ergonomics for highest comfort
extremely low pipetting forces for minimized risk of a cramp
built-in volume locking for error-free results
innovative tip ejector button, adjustable for right- and left-handed users*
secure tip ejection, made of stainless steel*
built-in recalibration mechanism (calibration tool inclusive)
8 color-coded models
soft-spring system
completely autoclavable 20 minutes at 121°C (DIN EN ISO 285)
individual certificate and serial number
DE-M marked according to the German calibration law

* 500-5000?l and 1-10ml version without tip ejector

** The mentioned results can only be achieved with matching original Gilson® Diamond Tips.

Artikelliste

Order number	Model	Version	Autoclavable	Color	Channels	Systematic errors ISO	Systematic errors witeg	Increment	Numeric division	Random errors ISO	Random errors witeg	Volume
5 402 002 P	Witopet premium 0.2 - 2 µl	Variable	at 121°C	Orange	1	±0.08 µl	±0.03 µl	0.002 µl	0.01 µl	≤0.04 µl	≤0.014 µl	0.2 - 2 µl
5 402 010 P	Witopet premium 1 - 10 µl	Variable	at 121°C	Red	1	±0.12 µl	±0.1 µl	0.02 µl	0.1 µl	≤0.08 µl	≤0.04 µl	1 - 10 µl
5 402 020 P	Witopet premium 2 - 20 µl	Variable	at 121°C	Pale yellow	1	±0.2 µl	±0.2 µl	0.02 µl	0.1 µl	≤0.1 µl	≤0.06 µl	2 - 20 µl
5 402 100 P	Witopet premium 10 - 100 µl	Variable	at 121°C	Salmon	1	±0.8 µl	±0.8 µl	0.2 µl	1 µl	≤0.3 µl	≤0.15 µl	10 - 100 µl
5 402 200 P	Witopet premium 20 - 200 µl	Variable	at 121°C	Yellow	1	±1.6 µl	±1.6 µl	0.2 µl	1 µl	≤0.6 µl	≤0.3 µl	20 - 200 µl
5 402 901 P	Witopet premium 100 - 1000 µl	Variable	at 121°C	Blue	1	±8 µl	±8 µl	2 µl	10 µl	≤3 µl	≤1.5 µl	100 - 1000 µl
5 402 950 P	Witopet premium 500 - 5000 µl	Variable, without tip ejector	at 121°C	Purple	1	±40 µl	±30 µl	2 µl	10 µl	≤15 µl	≤8 µl	500 - 5000 µl
5 402 910 P	Witopet premium 1 - 10 ml	Witopet premium	at 121°C	Pale blue	1	±60 µl	±60 µl	20 µl	100 µl	≤30 µl	≤16 µl	1 - 10 ml

Microliter pipettes Witopet premium Multi-Channel

Looking for the latest pipetting innovation at an attractive price? WITOPET premium is just the right pipette for you. The ergonomic designed pipette of optimal weightiness requires extremely low pipetting forces making even prolonged pipetting as comfortable as possible. Other innovative features are the adjustable tip ejector button and the built-in volume locking. Moreover, WITOPET premium is characterized by superior accuracy and precision. Our error ranges are better than those required by DIN EN ISO 8655-2. WITOPET premium is available as multi-channel model with 8 and 12 channels, covering the volume range from 0.5 to 300?l.

Your advantage at a glance:

highest quality, made in France
the best in its class performance, most competitive pricing
highest accuracy and precision, our error ranges are better than the DIN EN ISO 8655-2 requirements
extremely light weightiness, while the robustness still remains
perfect ergonomic pipetting for highest comfort
extremely low forces required for minimized risk of a cramp
built-in volume locking for error-free results
innovative tip ejector button, adjustable for right- and left-handed users
secure tip ejection
built-in recalibration mechanism (calibration tool inclusive)
completely autoclavable 20 minutes at 121°C (DIN EN ISO 285)
individual certificate and serial number
DE-M marked according to the German calibration law
4 color-coded models
soft-spring system

Artikelliste

Order number	Model	Version	Autoclavable	Color	Channels	Systematic errors ISO	Systematic errors witeg	Increment	Numeric division	Random errors ISO	Random errors witeg	Volume
5 403 101 P	Witopet premium 8 x 0.5 - 10 µl	Variable	at 121°C	Red	8	±0.24 µl	±0.22 µl	0.02 µl	0.1 µl	≤0.16 µl	≤0.11 µl	8 x 0.5 - 10 µl
5 403 201 P	Witopet premium 12 x 0.5 - 10 µl	Variable	at 121°C	Red	12	±0.24 µl	±0.22 µl	0.02 µl	0.1 µl	≤0.16 µl	≤0.11 µl	12 x 0.5 - 10 µl
5 403 102 P	Witopet premium 8 x 2 - 20 µl	Variable	at 121°C	Pale Yellow	8	±0.4 µl	±0.4 µl	0.02 µl	0.1 µl	≤0.2 µl	≤0.17 µl	8 x 2 - 20 µl
5 403 202 P	Witopet premium 12 x 2 - 20 µl	Variable	at 121°C	Pale Yellow	12	±0.4 µl	±0.4 µl	0.02 µl	0.1 µl	≤0.2 µl	≤0.17 µl	12 x 2 - 20 µl
5 403 120 P	Witopet premium 8 x 20 - 200 µl	Variable	at 121°C	Yellow	8	±3.2 µl	±2.2 µl	0.2 µl	1 µl	≤1.2 µl	≤0.55 µl	8 x 20 - 200 µl
5 403 220 P	Witopet premium 12 x 20 - 200 µl	Variable	at 121°C	Yellow	12	±3.2 µl	±2.2 µl	0.2 µl	1 µl	≤1.2 µl	≤0.55 µl	12 x 20 - 200 µl
5 403 130 P	Witopet premium 8 x 20 - 300 µl	Variable	at 121°C	Green	8	±8 µl	±3.3 µl	0.2 µl	1 µl	≤3 µl	≤1.1 µl	8 x 20 - 300 µl
5 403 230 P	Witopet premium 12 x 20 - 300 µl	Witopet premium	at 121°C	Green	12	±8 µl	±3.3 µl	0.2 µl	1 µl	≤3 µl	≤1.1 µl	12 x 20 - 300 µl

Microliter pipettes Witopet premium Starter-Kit - 5 402 600 P

Your advantage at a glance:

highest quality, made in France
best in its class performance, most competitive price
highest accuracy and precision, our error ranges are better than the DIN EN ISO 8655-2 requirements
extremely light weightiness, while the robustness still remains
perfect ergonomics for highest comfort
extremely low pipetting forces for minimized risk of a cramp
built-in volume locking for error-free results
innovative tip ejector button, adjustable for right- and left-handed users*
secure tip ejection, made of stainless steel*
built-in recalibration mechanism (calibration tool inclusive)
8 color-coded models
soft-spring system
completely autoclavable 20 minutes at 121°C (DIN EN ISO 285)
individual certificate and serial number
DE-M marked according to the German calibration law

* 500-5000?l and 1-10ml version without tip ejector

**The mentioned results can only be achieved with matching original Gilson® Diamond Tips

Scope of supply of the Starter kit:

1 WITOPET premium 20µl
1 WITOPET premium 200 µl
1 WITOPET premium 1000 µl
1 Gilson Diamond® pipette tips D1000, Tipack 100-1000 µl
1 Gilson Diamond® pipette tips D200, Tipack 2-200 µl
3 single pipette holders
1 calibration tool
1 “2-minute inspection” poster

Microliter pipettes WITOPET expert Single-Channel

The new microlitre pipette WITOPET expert offers comfort thanks to an ergonomic handle and effortless pipetting thanks to a smooth-running pipetting button. Its longevity is guaranteed by simple maintenance and calibration. The pipette fulfils standards such as DIN EN ISO 8655 and offers sterile handling and calibration stability, even after repeated autoclaving.

Your advantages at a glance:

reverse pipetting for accurate and precise intake and delivery of liquids of different viscosities
soft grip prevents heat transfer to the internal components, ensuring precise pipetting
counter locking mechanism prevents volume changes during pipetting
blow-out system allows every last drop to be released
new tip cone with high mechanical strength and very good resistance to chemicals
interchangeable drops for pipette identification
perfected ergonomics for maximum comfort with new, ergonomic handle with soft part
particularly light in weight and yet robust
minimum effort required when pipetting to avoid excessive strain during pipetting
simple and quick maintenance and calibration
completely autoclavable for 15 minutes at 121°C (DIN EN ISO 285)
excellent calibration stability: no recalibration is required even after multiple autoclaving

*2-10 ml version without tip ejector

Artikelliste

Order number	Model	Version	Autoclavable	Color	Channels	Increment	Volume	Inaccuracy	Imprecision
5 402 002 E	Witopet expert 0.1-2.5 μl	Variable	at 121°C	grey	1	0.01 µl	0.1-2.5 μl	12.00%	6.00%
5 402 010 E	Witopet expert 0.5-10 μl	Variable	at 121°C	grey	1	0.10 µl	0.5-10 μl	2.50%	1.50%
5 402 020 E	Witopet expert 2-20μl	Variable	at 121°C	grey	1	0.10 µl	2-20μl	3.00%	2.00%
5 402 100 E	Witopet premium 10-100 μl	Variable	at 121°C	yellow	1	0.50 µl	10-100 μl	3.00%	1.50%
5 402 200 E	Witopet expert 20-200 μl	Variable	at 121°C	yellow	1	1.00 µl	20-200 μl	2.00%	0.80%
5 402 901 E	Witopet expert 100-1000 μl	Variable	at 121°C	blue	1	5.00 µl	100-1000 μl	2.00%	0.70%
5 402 950 E	Witopet expert 0.5-5 ml	Variable	at 121°C	green	1	0.05 ml	0.5-5 ml	2.00%	0.60%
5 402 910 E	Witopet expert 2-10 ml	Variable	at 121°C	green	1	0.10 ml	2-10 ml	3.00%	0.60%

Overhead stirrer HS-D, High-Speed, 200-3000 rpm, 5000/10000 mPas, digital, internal controller

Ideal for:

all mixing applications in the laboratory
specialized for low- to medium-viscosity materials

Features:

maximal 10 / 20 liter
200 - 3,000 rpm
maximal viscosity 5,000 / 10,000 mPas
direct driven motor
digital LCD display
6 light sources
smooth start and change of stirring speed while operation
storage function for timer and speed
impeller height adjustable
chrome-plated stainless steel chuck
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
overload protection
overheat protection
operation LEDs

Controller:

Jog-Shuttle controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Torque	Moisture range	Speed	Capacity	Stirrer diameter	Temperature range	Packing size	Viscosity (mPas)
DH.WOS01015	HS-30D unit 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Digital, integrated	70 Ncm at chuck	80% RH	200 - 3000 rpm	max. 10 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 5000 mPas
DH.WOS01016	HS-30D set 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Digital, integrated	70 Ncm at chuck	80% RH	200 - 3000 rpm	max. 10 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 5000 mPas
DH.WOS01025	HS-100D unit 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Digital, integrated	80 Ncm at chuck	80% RH	200 - 3000 rpm	max. 20 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 10000 mPas
DH.WOS01026	HS-100D set 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Digital, integrated	80 Ncm at chuck	80% RH	200 - 3000 rpm	max. 20 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 10000 mPas

Overhead stirrer HS-A High-Speed 200-3000 rpm 5000/10000 mPas analog internal controller

Ideal for:

all mixing applications in the laboratory
specialized for low- to medium-viscosity materials

Features:

maximal 10 / 20 liter
200 - 3,000 rpm
maximal viscosity 5,000 / 10,000 mPas
direct driven motor
smooth start and change of stirring speed while operation
impeller height adjustable
chrome-plated stainless steel chuck
CE certified and unique serial number for tracing

Safety mechanism:

overheat protection

Controller:

Analog phase controller with control knob

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Torque	Moisture range	Speed	Capacity	Stirrer diameter	Temperature range	Packing size	Viscosity (mPas)
DH.WOS01210	HS-50A unit 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Analog, integrated	70 Ncm at chuck	80% RH	200 - 3000 rpm	max. 10 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 5000 mPas
DH.WOS01211	HS-50A set 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Analog, integrated	70 Ncm at chuck	80% RH	200 - 3000 rpm	max. 10 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 5000 mPas
DH.WOS01215	HS-120A unit 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Analog, integrated	80 Ncm at chuck	80% RH	200 - 3000 rpm	max. 20 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 10000 mPas
DH.WOS01216	HS-120A set 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Analog, integrated	80 Ncm at chuck	80% RH	200 - 3000 rpm	max. 20 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 10000 mPas

Overhead stirrer HT-DX High-Torque 50-1000 rpm 60,000/90,000 mPas digital internal controller

Ideal for:

all mixing applications in the laboratory
specialized for light watery solutions up to high-viscosity fluids

Features:

maximal 40 / 60 liter
50 - 1,000 rpm
maximal viscosity 60,000 / 90,000 mPas
worm-geared motor (ratio 3.5:1)
digital LCD display
smooth start and change of stirring speed while operation
storage function for timer and speed
impeller height adjustable
chrome-plated stainless steel chuck
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
overload protection
overheat protection
operation LEDs

Controller:

Jog-Shuttle controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Torque	Moisture range	Speed	Capacity	Stirrer diameter	Temperature range	Packing size	Viscosity (mPas)
DH.WOS01051	HT-50DX unit 230 V	High-torque	90 mm	180 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Digital, integrated	180 Ncm at chuck	80% RH	50 - 1000 rpm	max. 40 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 60000 mPas
DH.WOS01052	HT-50DX set 230 V	High-torque	90 mm	180 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Digital, integrated	180 Ncm at chuck	80% RH	50 - 1000 rpm	max. 40 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 60000 mPas
DH.WOS01071	HT-120DX unit 230 V	High-torque	90 mm	210 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Digital, integrated	210 Ncm at chuck	80% RH	50 - 1000 rpm	max. 60 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 90000 mPas
DH.WOS01072	HT-120DX set 230 V	High-torque	90 mm	210 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Digital, integrated	210 Ncm at chuck	80% RH	50 - 1000 rpm	max. 60 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 90000 mPas

Overhead stirrer HT-AX, High-Torque, 50-1000 rpm, 60,000/90,000 mPas, analog, internal controller

Ideal for:

all mixing applications in the laboratory
specialized for light watery solutions up to high-viscosity fluids

Features:

maximal 40 / 60 liter
50 - 1,000 rpm
maximal viscosity 60,000 / 90,000 mPas
worm-geared motor (ratio 3.5:1)
smooth start and change of stirring speed while operation
impeller height adjustable
chrome-plated stainless steel chuck
CE certified and unique serial number for tracing

Safety mechanism:

overheat protection
overload protection
operation LEDs

Controller:

Analog phase controller with control knob

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Torque	Moisture range	Speed	Capacity	Stirrer diameter	Temperature range	Packing size	Viscosity (mPas)
DH.WOS01251	HT-50AX unit 230 V	High-torque	90 mm	180 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Analog, integrated	180 Ncm at chuck	80% RH	50 - 1000 rpm	max. 40 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 60000 mPas
DH.WOS01252	HT-50AX set 230 V	High-torque	90 mm	180 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Analog, integrated	180 Ncm at chuck	80% RH	50 - 1000 rpm	max. 40 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 60000 mPas
DH.WOS01271	HT-120AX unit 230 V	High-torque	90 mm	210 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Analog, integrated	210 Ncm at chuck	80% RH	50 - 1000 rpm	max. 60 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 90000 mPas
DH.WOS01272	HT-120AX set 230 V	High-torque	90 mm	210 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Analog, integrated	210 Ncm at chuck	80% RH	50 - 1000 rpm	max. 60 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 90000 mPas

Homogenizer HG-15A, 27000 rpm, analog internal controller

Ideal for:

all disperging and homogenizing applications
designed for liquid and tissue samples

Features:

up to 27,000 rpm
working range 1 - 2,500 ml
CE certified and unique serial number for tracing

Safety mechanism:

overheat protection

Controller:

analog stepless controller with touch-button

Artikelliste

Order number	Model	Version	Length (inner)	Width (Outer)	Length (outer)	Height (outer)	Diameter (outer)	Material	Ideal for	Controller	Moisture range	Speed	Capacity	Motor rating	Temperature range	Packing size
DH.WHG02015	HG-15A unit 230 V	Unit	Extension arm: 250 mm	60 mm	75 mm	215 mm	Extension arm size: Ø12.7	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for liquid and tissue samples	Analog, integrated	85% RH	up to 27000 rpm, stepless	1 - 2500 ml	Input: 300 W, output: 160 W	Ambient temperature +5 - 50°C	320 x 300 x h190 mm
DH.WHG02016	HG-15A set A 230 V	Set A	Extension arm: 250 mm	60 mm	75 mm	215 mm	Extension arm size: Ø12.7	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for liquid and tissue samples	Analog, integrated	85% RH	up to 27000 rpm, stepless	1 - 2500 ml	Input: 300 W, output: 160 W	Ambient temperature +5 - 50°C	320 x 300 x h190 mm
DH.WHG02017	HG-15A set B 230 V	Set B	Extension arm: 250 mm	60 mm	75 mm	215 mm	Extension arm size: Ø12.7	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for liquid and tissue samples	Analog, integrated	85% RH	up to 27000 rpm, stepless	1 - 2500 ml	Input: 300 W, output: 160 W	Ambient temperature +5 - 50°C	320 x 300 x h190 mm

Homogenizer HS-30E, 200-5000 rpm, analog internal controller

Ideal for:

all disperging and homogenizing applications
designed for tissue grinders

Features:

200 - 5,000 rpm
working range up to 10,000 ml
CE certified and unique serial number for tracing

Safety mechanism:

overheat protection

Controller:

analog stepless controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Moisture range	Speed	Capacity	Motor rating	Temperature range	Packing size
DH.WOS01010	HS-30E unit 230 V	Unit	90 mm	145 mm	180 mm	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for tissue grinders	Analog, integrated	85% RH	200 - 5000 rpm, resolution: 85 N cm	up to 10000 ml	Input: 85 W, output: 75 W; 1/10 HP	Ambient temperature +5 - 50°C	320 x 300 x h190 mm
DH.WOS01011	HS-30E set 230 V	Set	90 mm	145 mm	180 mm	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for tissue grinders	Analog, integrated	85% RH	200 - 5000 rpm, resolution: 85 N cm	up to 10000 ml	Input: 85 W, output: 75 W; 1/10 HP	Ambient temperature +5 - 50°C	320 x 300 x h190 mm

Racks for microliter pipettes Witopet EP - 5 406 105

Pipette rack for "Witopet EP" with 5 places

Baths WCB Circulation water bath 6/11/22 Liter 100°C ±0,1°C

Ideal for:

biotechnology, clinical, environmental, medical, petroleum & food industry, pharmaceutical and industrial applications
connection with evaporators and viscometers is applicable

Features:

user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
stainless steel bath & lid for superior durability & high thermal efficiency / consistency
storage function for the set values of temperature and timer
powerful circulation pump assures temperature uniformity: internal and external circulation
storage function for the set values of temperature and timer
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

locking mode
over- temperature and over-current protection
sensor error detection
low water level warning and automatic stop function

Controller:

digital fuzzy controller with Jog-Shuttle-switch (turn + push)

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Drain valve	Connections	Capacity	Effective space	Pump performance	Power consumption	Temperature control resolution	Temperature range	Temperature fluctuation	Temperature accuracy	Packing size	Sensor	Flow rate
DH.WCB00106	WCB-6 230 V	300 mm	155 mm	150 mm	330 mm	185 mm	385 mm		Circulation nozzle inner Ø7 x outer Ø11mm ( IØ 9 / OØ 12mm silicon tube connection for inner circulation)	6 l	120 x 155 x 150 mm	5 l/min	800 W	Display 0.1°C, control 0.1°C	Room temperature +5°C - 100°C	±0.2°C	±0.1°C	350 x 210 x 340 mm	Temperature sensor PT100	5 l/Min (innen/außen)
DH.WCB00111	WCB-11 230 V	302 mm	240 mm	150 mm	335 mm	275 mm	385 mm		Circulation nozzle inner Ø7 x outer Ø11mm ( IØ 9 / OØ 12mm silicon tube connection for inner circulation)	11 l	170 x 240 x 150 mm	5 l/min	1000 W	Display 0.1°C, control 0.1°C	Room temperature +5°C - 100°C	±0.2°C	±0.1°C	360 x 300 x 420 mm	Temperature sensor PT100	5 l/Min (innen/außen)
DH.WCB00122	WCB-22 230 V	500 mm	295 mm	150 mm	540 mm	335 mm	410 mm	mounted (Ø9.5 - 11mm)	Circulation nozzle inner Ø7 x outer Ø11mm ( IØ 9 / OØ 12mm silicon tube connection for inner circulation)	22 l	372 x 295 x 150 mm	5 l/min	2000 W	Display 0.1°C, control 0.1°C	Room temperature +5°C - 100°C	±0.2°C	±0.1°C	580 x 380 x 470 mm	Temperature sensor PT100	5 l/Min (innen/außen)

Baths WCR Circulation water bath 8/12/22/30 Liter, -25°C down to 150°C ±0,1°C

Ideal for:

connection with evaporator

Features:

stainless steel bath, polyurethane insulation of 40 mm thickness and body made of powder-coated steel
innovated refrigeration system ensures temperature performance, includes intelligent control for preventing compressor overload, CFC-free (R-404A)
innovated powerful circulation pump ensures temperature uniformity: internal and external circulation and 5 steps circulation speed
stainless steel flat lid & valve ball included, dome lid optional
RS232C interface: remote monitoring and controlling with PC
proper liquid level tag in bath
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker
low liquid level warning and automatic stop function
locking mode

Controller:

digital fuzzy controller with Jog-Dial-switch (turn + push) & capacitive touch button

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Connections	Pressure	Heating power	Capacity	Effective space	Pump performance	Temperature variation	Temperature control resolution	Temperature range	Temperature accuracy	Packing size	Refrigerator	Cooling capacity	Sensor	Flow rate
DH.WCR00408	WCR-8 230 V	175 mm	320 mm	150 mm	330 mm	474 mm	752 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1000 W	8 l	175 x 153 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	560 x 420 x 922 mm	250 W	300 W at +20°C, 200 W at 0°C, 110 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCR00412	WCR-12 230 V	230 mm	350 mm	150 mm	400 mm	523 mm	807 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1500 W	12 l	230 x 181 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	630 x 530 x 972 mm	250 W	380 W at +20°C, 250 W at 0°C, 130 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCR00422	WCR-22 230 V	290 mm	390 mm	200 mm	483 mm	563 mm	850 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2000 W	22 l	290 x 220 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	670 x 615 x 1022 mm	370 W	680 W at +20°C, 500 W at 0°C, 300 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCR00430	WCR-30 230 V	330 mm	460 mm	200 mm	494 mm	633 mm	906 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2200 W	30 l	330 x 290 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	740 x 625 x 1072 mm	560 W	850 W at +20°C, 620 W at 0°C, 400 W at -20°C	Temperature sensor PT100	25l/Min.

Baths WCL Circulation water bath 8/12/22/30 Liter, -35°C down to 150°C ±0,1°C

Ideal for:

connection with evaporator

Features:

stainless steel bath, polyurethane insulation of 40 mm thickness and body made of powder-coated steel
innovated refrigeration system ensures temperature performance, includes intelligent control for preventing compressor overload, CFC-free (R-404A)
innovated powerful circulation pump ensures temperature uniformity: internal and external circulation and 5 steps circulation speed
stainless steel flat lid & valve ball included, dome lid optional
RS232C interface: remote monitoring and controlling with PC
proper liquid level tag in bath
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker
low liquid level warning and automatic stop function
locking mode

Controller:

digital fuzzy controller with Jog-Dial-switch (turn + push) & capacitive touch button

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Connections	Pressure	Heating power	Capacity	Effective space	Pump performance	Temperature variation	Temperature control resolution	Temperature range	Temperature accuracy	Packing size	Refrigerator	Cooling capacity	Sensor	Flow rate
DH.WCL00408	WCL-8 230 V	175 mm	320 mm	150 mm	400 mm	523 mm	807 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1000 W	8 l	175 x 153 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	630 x 530 x 972 mm	370 W	500 W at +20°C, 340 W at 0°C, 200 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCL00412	WCL-12 230 V	230 mm	350 mm	150 mm	400 mm	523 mm	807 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1500 W	12 l	230 x 181 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	630 x 530 x 972 mm	370 W	530 W at +20°C, 370 W at 0°C, 210 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCL00422	WCL-22 230 V	290 mm	390 mm	200 mm	483 mm	563 mm	850 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2000 W	22 l	290 x 220 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	670 x 615 x 1022 mm	650 W	860 W at +20°C, 620 W at 0°C, 400 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCL00430	WCL-30 230 V	330 mm	460 mm	200 mm	494 mm	633 mm	906 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2200 W	30 l	330 x 290 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	740 x 625 x 1072 mm	750 W	1030 W at +20°C, 760 W at 0°C, 500 W at -20°C	Temperature sensor PT100	25l/Min.

1 From 4