The following products have been found matching your search "on": 355

Filter

5 From 15

No results were found for the filter!

Drying oven SWOV Vacuum oven SmartLab 19/30/70 Liter, 200°C, 10-750 mmHg

Ideal for:

drying, baking, conditioning, curing, out-glassing solids and liquids, vacuum embedding, moisture testing, plating and aging test

Features:

very easy and convenient for vacuuming and venting, easy to read vacuum gauge
high quality door sealing: high temperature grade silicone molded gasket
superior uniformity and stability
safety window: tempered safety glass 12T & polycarbonate 5T
compact new body design
stainless steel interior, powder-coated steel body and glass wool insulation
2x aluminium shelves included
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

push alarm service to your smartphone
overheat and over-current protection
sensor error detection and leakage breaker

Controller:

Smart-Lab™ controller with 4? full touch screen TFT LCD:

WiRe™ app service, remote control system
variable program settings
self-diagnostic function
automatic data recording
data transfer to PC by USB memory
Internet connectivity with WiFi

Recommended vacuum pump for 18.6l- and 30l-oven: Rocker 810
Recommended vacuum pump for 70l-oven: Rocker 800/Rocker 811

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Heating time	Shelves	Heating power	Capacity	Power consumption	Temperature variation	Temperature control resolution	Temperature range	Temperature fluctuation	Vacuum range	Packing size	Sensor
DH.SWOV03020	SWOV-20 230 V	with Smart-LabTM controller, with vacuum inlet valve size outer Ø10 mm	265 mm	290 mm	265 mm	480 mm	475 mm	552 mm	Drying, baking, conditioning, curing, out-glassing solids and liquids, vacuum embedding, moisture testing, plating and aging test	60 min. to 100°C, 90 min. to 150°C	2 aluminium shelves included, height between shelves 87 mm	2 x 170 W, 2 x 130 W	18.6 l	600 W	±2.0°C at 100°C, ±3.0°C at 150°C	Display 1.0°C, control 1.0°C	Room temperature +5°C - 200°C	±0.5°C at 100°C & 150°C	10 - 750 mmHg, 0.63 mbar, 0.39 mbar/h	585 x 580 x 795 mm	Temperature sensor PT100
DH.SWOV03030	SWOV-30 230 V	with Smart-LabTM controller, with vacuum inlet valve size outer Ø10 mm	300 mm	330 mm	300 mm	515 mm	515 mm	587 mm	Drying, baking, conditioning, curing, out-glassing solids and liquids, vacuum embedding, moisture testing, plating and aging test	70 min. to 100°C, 100 min. to 150°C	2 aluminium shelves included, height between shelves 98 mm	2 x 170 W, 2 x 130 W	30 l	600 W	±2.0°C at 100°C, ±3.0°C at 150°C	Display 1.0°C, control 1.0°C	Room temperature +5°C - 200°C	±0.5°C at 100°C & 150°C	10 - 750 mmHg, 0.63 mbar, 0.39 mbar/h	620 x 620 x 830 mm	Temperature sensor PT100
DH.SWOV03070	SWOV-70 230 V	with Smart-LabTM controller, with vacuum inlet valve size outer Ø10 mm	400 mm	435 mm	400 mm	618 mm	620 mm	687 mm	Drying, baking, conditioning, curing, out-glassing solids and liquids, vacuum embedding, moisture testing, plating and aging test	80 min. to 100°C, 100 min. to 150°C	2 aluminium shelves included, height between shelves 133 mm	2 x 350 W, 2 x 450 W	70 l	1600 W	±2.5°C at 100°C, ±3.5°C at 150°C	Display 1.0°C, control 1.0°C	Room temperature +5°C - 200°C	±0.5°C at 100°C & 150°C	10 - 750 mmHg, 0.63 mbar, 0.39 mbar/h	725 x 720 x 930 mm	Temperature sensor PT100

Muffel furnace FP muffel furnace 3/4.5/12/14/27/63 Liter 1.000°C

Ideal for:

ash-determinations, enameling, fusions, precipitate drying

Features:

user‘s self-compensation function for temperature (±50.0°C)
resolution: 1°C, 1 min
ceramic fibre plate included
powder-coated steel body, ceramic fibre insulation, ceramic fibre exposed heating wire interior with 4-sided heating
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

safety switch for door opening
overheat and over-current protection
sensor error detection

Controller:

Jog-Dial controller (PID) with 2-way knob (turn + push), digital LCD with backlight, and two durable setting buttons
programmable: 4 patterns with 10 segments

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Heating time	Heating power	Capacity	Temperature range	Thermocouple	Packing size	Accessories
DH.WF21.P03	FP-03 230 V		130 mm	250 mm	90 mm	410 mm	480 mm	530 mm	Ash-determinations, enameling, fusions, precipitate drying	16 min. to 800°C	1400 W	3 l	300°C - 1000°C	K-type thermocouple	630 x 540 x 770 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF21.P05	FP-05 230 V		150 mm	300 mm	100 mm	440 mm	530 mm	550 mm	Ash-determinations, enameling, fusions, precipitate drying	16 min. to 800°C	1800 W	4.5 l	300°C - 1000°C	K-type thermocouple	680 x 570 x 780 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF21.P12	FP-12 230 V	Not applicable in Europe	200 mm	300 mm	200 mm	500 mm	550 mm	660 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	3600 W	12 l	300°C - 1000°C	K-type thermocouple	700 x 630 x 890 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF21.P14	FP-14 230 V	Not applicable in Europe	250 mm	350 mm	160 mm	550 mm	580 mm	620 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4000 W	14 l	300°C - 1000°C	K-type thermocouple	740 x 680 x 850 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF21.P27	FP-27 230 V	Not applicable in Europe	300 mm	300 mm	300 mm	600 mm	590 mm	760 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4600 W	27 l	300°C - 1000°C	K-type thermocouple	740 x 730 x 990 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF21.P63	FP-63 230 V	Not applicable in Europe	400 mm	400 mm	400 mm	1000 mm	730 mm	920 mm	Ash-determinations, enameling, fusions, precipitate drying	23 min. to 800°C	9000 W	63 l	300°C - 1000°C	K-type thermocouple	1160 x 900 x 1100 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF23.P12	FP-12 3 Phase		200 mm	300 mm	200 mm	500 mm	550 mm	660 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	3600 W	12 l	300°C - 1000°C	K-type thermocouple	700 x 630 x 890 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF23.P14	FP-14 3 Phase		250 mm	350 mm	160 mm	550 mm	580 mm	620 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4000 W	14 l	300°C - 1000°C	K-type thermocouple	740 x 680 x 850 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF23.P27	FP-27 3 Phase		300 mm	300 mm	300 mm	600 mm	590 mm	760 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4600 W	27 l	300°C - 1000°C	K-type thermocouple	740 x 730 x 990 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WF23.P63	FP-63 3 Phase		400 mm	400 mm	400 mm	1000 mm	730 mm	920 mm	Ash-determinations, enameling, fusions, precipitate drying	23 min. to 800°C	9000 W	63 l	300°C - 1000°C	K-type thermocouple	1160 x 900 x 1100 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating

Muffel furnace FHP muffle furnace 3/45/12/14/27/63 Liter, 1.200°C

Ideal for:

ash-determinations, enameling, fusions, precipitate drying

Features:

user‘s self-compensation function for temperature (±50.0°C)
resolution: 1°C, 1 min
ceramic fibre plate included
powder-coated steel body, ceramic fibre insulation, ceramic fibre exposed heating wire interior with 4-sided heating
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

safety switch for door opening
overheat and over-current protection
sensor error detection

Controller:

Jog-Dial controller (PID) with 2-way knob (turn + push), digital LCD with backlight, and two durable setting buttons
programmable: 4 patterns with 10 segments

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Heating time	Heating power	Capacity	Temperature range	Thermocouple	Packing size	Accessories
DH.WFH22.P03	FHP-03 230 V		130 mm	250 mm	90 mm	410 mm	480 mm	530 mm	Ash-determinations, enameling, fusions, precipitate drying	16 min. to 800°C	1400 W	3 l	300°C - 1200°C	K-type thermocouple	630 x 540 x 770 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH22.P05	FHP-05 230 V		150 mm	300 mm	100 mm	440 mm	530 mm	550 mm	Ash-determinations, enameling, fusions, precipitate drying	16 min. to 800°C	1800 W	4.5 l	300°C - 1200°C	K-type thermocouple	680 x 570 x 780 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH22.P12	FHP-12 230 V	Not applicable in Europe	200 mm	300 mm	200 mm	500 mm	550 mm	660 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	3600 W	12 l	300°C - 1200°C	K-type thermocouple	700 x 630 x 890 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH22.P14	FHP-14 230 V	Not applicable in Europe	250 mm	350 mm	160 mm	550 mm	590 mm	620 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4000 W	14 l	300°C - 1200°C	K-type thermocouple	740 x 680 x 850 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH22.P27	FHP-27 230 V	Not applicable in Europe	300 mm	300 mm	300 mm	600 mm	590 mm	760 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4600 W	27 l	300°C - 1200°C	K-type thermocouple	740 x 730 x 990 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH22.P63	FHP-63 230 V	Not applicable in Europe	400 mm	400 mm	400 mm	1000 mm	730 mm	920 mm	Ash-determinations, enameling, fusions, precipitate drying	23 min. to 800°C	9000 W	63 l	300°C - 1200°C	K-type thermocouple	1160 x 900 x 1100 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH23.P12	FHP-12 3 Phase		200 mm	300 mm	200 mm	500 mm	550 mm	660 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	3600 W	12 l	300°C - 1200°C	K-type thermocouple	700 x 630 x 890 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH23.P14	FHP-14 3 Phase		250 mm	350 mm	160 mm	550 mm	580 mm	620 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4000 W	14 l	300°C - 1200°C	K-type thermocouple	740 x 680 x 850 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH23.P27	FHP-27 3 Phase		300 mm	300 mm	300 mm	600 mm	590 mm	760 mm	Ash-determinations, enameling, fusions, precipitate drying	20 min. to 800°C	4600 W	27 l	300°C - 1200°C	K-type thermocouple	740 x 730 x 990 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating
DH.WFH23.P63	FHP-63 3 Phase		400 mm	400 mm	400 mm	1000 mm	730 mm	920 mm	Ash-determinations, enameling, fusions, precipitate drying	23 min. to 800°C	9000 W	63 l	300°C - 1200°C	K-type thermocouple	1160 x 900 x 1100 mm	Heater: Kanthal A1, expose wire heating elements, 4-side heating

Baths WCR Circulation water bath 8/12/22/30 Liter, -25°C down to 150°C ±0,1°C

Ideal for:

connection with evaporator

Features:

stainless steel bath, polyurethane insulation of 40 mm thickness and body made of powder-coated steel
innovated refrigeration system ensures temperature performance, includes intelligent control for preventing compressor overload, CFC-free (R-404A)
innovated powerful circulation pump ensures temperature uniformity: internal and external circulation and 5 steps circulation speed
stainless steel flat lid & valve ball included, dome lid optional
RS232C interface: remote monitoring and controlling with PC
proper liquid level tag in bath
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker
low liquid level warning and automatic stop function
locking mode

Controller:

digital fuzzy controller with Jog-Dial-switch (turn + push) & capacitive touch button

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Connections	Pressure	Heating power	Capacity	Effective space	Pump performance	Temperature variation	Temperature control resolution	Temperature range	Temperature accuracy	Packing size	Refrigerator	Cooling capacity	Sensor	Flow rate
DH.WCR00408	WCR-8 230 V	175 mm	320 mm	150 mm	330 mm	474 mm	752 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1000 W	8 l	175 x 153 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	560 x 420 x 922 mm	250 W	300 W at +20°C, 200 W at 0°C, 110 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCR00412	WCR-12 230 V	230 mm	350 mm	150 mm	400 mm	523 mm	807 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1500 W	12 l	230 x 181 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	630 x 530 x 972 mm	250 W	380 W at +20°C, 250 W at 0°C, 130 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCR00422	WCR-22 230 V	290 mm	390 mm	200 mm	483 mm	563 mm	850 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2000 W	22 l	290 x 220 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	670 x 615 x 1022 mm	370 W	680 W at +20°C, 500 W at 0°C, 300 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCR00430	WCR-30 230 V	330 mm	460 mm	200 mm	494 mm	633 mm	906 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2200 W	30 l	330 x 290 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	740 x 625 x 1072 mm	560 W	850 W at +20°C, 620 W at 0°C, 400 W at -20°C	Temperature sensor PT100	25l/Min.

Baths WCL Circulation water bath 8/12/22/30 Liter, -35°C down to 150°C ±0,1°C

Ideal for:

connection with evaporator

Features:

stainless steel bath, polyurethane insulation of 40 mm thickness and body made of powder-coated steel
innovated refrigeration system ensures temperature performance, includes intelligent control for preventing compressor overload, CFC-free (R-404A)
innovated powerful circulation pump ensures temperature uniformity: internal and external circulation and 5 steps circulation speed
stainless steel flat lid & valve ball included, dome lid optional
RS232C interface: remote monitoring and controlling with PC
proper liquid level tag in bath
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker
low liquid level warning and automatic stop function
locking mode

Controller:

digital fuzzy controller with Jog-Dial-switch (turn + push) & capacitive touch button

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Connections	Pressure	Heating power	Capacity	Effective space	Pump performance	Temperature variation	Temperature control resolution	Temperature range	Temperature accuracy	Packing size	Refrigerator	Cooling capacity	Sensor	Flow rate
DH.WCL00408	WCL-8 230 V	175 mm	320 mm	150 mm	400 mm	523 mm	807 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1000 W	8 l	175 x 153 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	630 x 530 x 972 mm	370 W	500 W at +20°C, 340 W at 0°C, 200 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCL00412	WCL-12 230 V	230 mm	350 mm	150 mm	400 mm	523 mm	807 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1500 W	12 l	230 x 181 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	630 x 530 x 972 mm	370 W	530 W at +20°C, 370 W at 0°C, 210 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCL00422	WCL-22 230 V	290 mm	390 mm	200 mm	483 mm	563 mm	850 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2000 W	22 l	290 x 220 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	670 x 615 x 1022 mm	650 W	860 W at +20°C, 620 W at 0°C, 400 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCL00430	WCL-30 230 V	330 mm	460 mm	200 mm	494 mm	633 mm	906 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2200 W	30 l	330 x 290 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	740 x 625 x 1072 mm	750 W	1030 W at +20°C, 760 W at 0°C, 500 W at -20°C	Temperature sensor PT100	25l/Min.

Baths WCT Cold trap bath 10 Liter -40°C/-80°C

Ideal for:

collecting evaporation vapor or hazardous vapor from vacuum line

Features:

stainless steel bath
powder-coated steel, double painted & baked, 20 mm polyurethane-insulation
digital timer function (99hr 59min): delay time and operation time can be controlled
user‘s self-compensation function to control difference between real temperature and indicated temperature
drain valve mounted
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

over-current protection
sensor error detection and leakage breaker
locking mode

Controller:

digital PID controller with Jog-Shuttle-switch (turn + push)

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Capacity	Refrigerant	Temperature range	Packing size	Refrigerator
DH.WCT00140	WCT-40 230 V	2 glass cold trap	220 mm	220 mm	210 mm	377 mm	453 mm	705 mm	Collecting evaporation vapor or hazardous vapor from vacuum line	10 l	R-404A (CFC-free refrigerant)	-20°C up to -40°C	560 x 550 x 1010 mm	370 W
DH.WCT00180	WCT-80 230 V	2 glass cold trap	220 mm	220 mm	210 mm	377 mm	453 mm	705 mm	Collecting evaporation vapor or hazardous vapor from vacuum line	10 l	Mixture of R1270, R14, R134A, R404A, R508A	-65°C up to -80°C	680 x 640 x 1130 mm	750 W

Freezer SWUF-80 UniFreeze SmartLab 82 Liter -86°C - DH.SWUF0075

Ideal for:

ultra low refrigeration

Features:

personal-type compact ultra-low temperature freezer
freeze down to -86°C
CFC-free refrigerant
external temperature sensor hole
block condenser removes filter
filter-free mechanism lowers heat from the compressor
easy maintenance and improved performance
high-quality insulation panel and inner doors (powder-coated stainless steel) ensure defrosting around outer surface
stainless steel interior and powder-coated steel body
CE, UL/CUL & RoHS certified and unique serial number for tracing

Safety mechanism:

push alarm service to your smartphone
sensor error detection
door locking system, door open error
door ajar and power failure alarm
standard warning and alarm functions

Controller:

Smart-Lab™ controller with 7? full touch screen TFT LCD:

WiRe™ app service, remote control system
variable program settings
self-diagnostic function
automatic data recording
data transfer to PC by USB memory
Internet connectivity with WiFi

Freezer WUF-25 UniFreeze 25 Liter -86°C - DH.WUF0032

Ideal for:

ultra low refrigeration

Features:

personal-type compact ultra-low temperature freezer
freeze down to -86°C
CFC-free refrigerant
external temperature sensor hole
block condenser removes filter
filter-free mechanism lowers heat from the compressor
easy maintenance and improved performance
high-quality insulation panel and inner doors (powder-coated stainless steel) ensure defrosting around outer surface
stainless steel interior and powder-coated steel body
CE, UL/CUL & RoHS certified and unique serial number for tracing

Safety mechanism:

built-in standard warning and alarm functions

Controller:

digital feedback controller

Freezer WLF-420, 420 Liter, -35°C to -15°C - DH.WLF00420

Ideal for:

storage of bio reagent, seed, enzyme and various samples

Features:

fast freezing function
CFC free refrigerant (R-404A), 1 HP compressor
intelligent control of refrigerator for preventing overload of compressor
3x stainless steel shelves included, 16 kg load per shelf
stainless steel interior and powder-coated steel body
storage function for the set values of temperature and timer
RS232C interface for monitoring and controlling (WireRemote)
backlight LCD display
CE, UL/CUL & RoHS certified and unique serial number for tracing

Safety mechanism:

locking mode
over-current protection
sensor error detection and leakage breaker

Controller:

digital fuzzy controller with Jog-Shuttle-switch (turn + push)

Freeze dryer FD-8 Freeze dryer -60°C down to -90°C - DH.FRD00208

Ideal for:

wide range from pharmaceutics, biology, food industry to petrol-chemistry and semiconductor industry, etc.

Features:

ergonomic design and compact body size for all laboratory tables
allows automatic or manual process control
temperature and timer can be controlled at automatic mode
rapid integrated hot gas defrost function for quick next cycle turn-around
LED indication light in case of suitable temperature and vacuum
homogeneous temperature distribution across all shelves in dry chamber
made of stainless steel 304
backlight LCD display indicates temperature and vacuum
CE certified and unique serial number for tracing

Controller:

Jog-Dial-switch (turn + push) and touch button

Magnetic stirrer MS-500D, digital, up to 1500rpm, 200x200mm solid ceramic plate - DH.WMS04022

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials

Features:

digital display with backlight
shade motor for 80-1,500 rpm
enormous strength of magnet
high-quality solid ceramic plate 200x200 mm
heat-, chemical- and acid-resistant
no liquid can get into the body
powder-coated aluminium body
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Dial controller with touch-button for precise speed control

Magnetic stirrer MS-20D, digital, up to 1500 rpm, 180x180mm ceramic-coated aluminium plate - DH.WMS03022

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials

Features:

digital display with backlight
shade motor for 80-1,500 rpm
ceramic-coated aluminium plate 180x180 mm
heat-, chemical- and acid-resistant
powder-coated aluminium body
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Shuttle controller with touch-button

Magnetic stirrer MS-20A, analog, up to 1500rpm, 180x180mm ceramic-coated aluminium plate - DH.WMS03122

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials
heat-sensitive procedures in microbiology and biochemistry

Features:

up to 1,500 rpm
ceramic-coated aluminium plate 180x180 mm
heat-, chemical- and acid-resistant
powder-coated aluminium body
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

operation LEDs

Controller:

PWM controller

Magnetic stirrer MS-MP, digital, 4/8 places, 1200rpm, stainless steel plate

Ideal for:

multiple mixing applications at the same time
mixing of chemical, laboratory and pharmaceutical materials

Features:

80-1,200 rpm
stainless steel plate with 2x2 or 4x2 places
heat-, chemical- and acid-resistant
easy to clean
powder-coated aluminium body
stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Shuttle controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Controller	Moisture range	Housing material	Speed	Capacity	Plate size	Plate material	Temperature range	Packing size	Accessories
DH.WMS03036	MS-MP4 230 V	4 (2 x 2) stirring points (distance between points: 100 mm)	210 mm	300 mm	65 mm	Mixing of chemical, laboratory and pharmaceutical materials, multiple mixing applications at the same time	Digital	85% RH	Powder-coated steel	80 - 1200 rpm, control resolution 5 rpm	0.5 l per stirring point	210 x 300 mm	Stainless steel (#304)	Ambient temperature +5 - 50°C	330 x 300 x h180 mm	4 x 30 mm bar included, usable up to 30 mm bar
DH.WMS03038	MS-MP8 230 V	8 (4 x 2) stirring points (distance between points: 100 mm)	210 mm	500 mm	65 mm	Mixing of chemical, laboratory and pharmaceutical materials, multiple mixing applications at the same time	Digital	85% RH	Powder-coated steel	80 - 1200 rpm, control resolution 5 rpm	0.5 l per stirring point	210 x 500 mm	Stainless steel (#304)	Ambient temperature +5 - 50°C	540 x 330 x h180 mm	8 x 30 mm bar included, usable up to 30 mm bar

Jar tester JT-M6C, 6 places, 20-300rpm - DH.WJT06020

Ideal for:

flocculation test in water treatment laboratories
coagulation chemistry

Features:

20 - 300 rpm
6 places
6 light sources
programmable operations (6 programs with 10 steps)
geared motor (ratio: 10:1)
digital LCD for rpm, power-bar, status and programming
special designed timing belt
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
overload protection
overheat protection
operation LEDs

Controller:

programmable digital feedback controller with Jog-Shuttle switch (turn + push)

Overhead stirrer HS-D, High-Speed, 200-3000 rpm, 5000/10000 mPas, digital, internal controller

Ideal for:

all mixing applications in the laboratory
specialized for low- to medium-viscosity materials

Features:

maximal 10 / 20 liter
200 - 3,000 rpm
maximal viscosity 5,000 / 10,000 mPas
direct driven motor
digital LCD display
6 light sources
smooth start and change of stirring speed while operation
storage function for timer and speed
impeller height adjustable
chrome-plated stainless steel chuck
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
overload protection
overheat protection
operation LEDs

Controller:

Jog-Shuttle controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Torque	Moisture range	Speed	Capacity	Stirrer diameter	Temperature range	Packing size	Viscosity (mPas)
DH.WOS01015	HS-30D unit 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Digital, integrated	70 Ncm at chuck	80% RH	200 - 3000 rpm	max. 10 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 5000 mPas
DH.WOS01016	HS-30D set 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Digital, integrated	70 Ncm at chuck	80% RH	200 - 3000 rpm	max. 10 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 5000 mPas
DH.WOS01025	HS-100D unit 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Digital, integrated	80 Ncm at chuck	80% RH	200 - 3000 rpm	max. 20 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 10000 mPas
DH.WOS01026	HS-100D set 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Digital, integrated	80 Ncm at chuck	80% RH	200 - 3000 rpm	max. 20 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 10000 mPas

Overhead stirrer HS-T, High-Speed, 200-3000 rpm, 5000/10000 mPas, digital, external controller

Ideal for:

all mixing applications in the laboratory
specialized for low- to medium-viscosity materials
convenient for applications where remote control is needed

Features:

maximal 10 / 20 liter
200 - 3,000 rpm
maximal viscosity 5,000 / 10,000 mPas
direct driven motor
digital LCD display on remote controller
smooth start and change of stirring speed while operation
storage function for timer and speed
impeller height adjustable
chrome-plated stainless steel chuck
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
overload protection
overheat protection
operation LEDs

Controller:

Jog-Shuttle remote controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Torque	Moisture range	Speed	Capacity	Stirrer diameter	Temperature range	Packing size	Viscosity (mPas)
DH.WOS01035	HS-30T unit 230 V	High-speed	90 mm	100 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials, convenient for applications where remote control is needed	Digital, remote	70 Ncm at chuck	80% RH	200 - 3000 rpm	max. 10 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	580 x 340 x h230 mm	max. 5000 mPas
DH.WOS01036	HS-30T set 230 V	High-speed	90 mm	100 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials, convenient for applications where remote control is needed	Digital, remote	70 Ncm at chuck	80% RH	200 - 3000 rpm	max. 10 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	580 x 340 x h230 mm	max. 5000 mPas
DH.WOS01045	HS-100T unit 230 V	High-speed	90 mm	100 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials, convenient for applications where remote control is needed	Digital, remote	80 N cm at chuck	80% RH	200 - 3000 rpm	max. 20 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	580 x 340 x h230 mm	max. 10000 mPas
DH.WOS01046	HS-100T set 230 V	High-speed	90 mm	100 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials, convenient for applications where remote control is needed	Digital, remote	80 Ncm at chuck	80% RH	200 - 3000 rpm	max. 20 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	580 x 340 x h230 mm	max. 10000 mPas

Overhead stirrer HS-A High-Speed 200-3000 rpm 5000/10000 mPas analog internal controller

Ideal for:

all mixing applications in the laboratory
specialized for low- to medium-viscosity materials

Features:

maximal 10 / 20 liter
200 - 3,000 rpm
maximal viscosity 5,000 / 10,000 mPas
direct driven motor
smooth start and change of stirring speed while operation
impeller height adjustable
chrome-plated stainless steel chuck
CE certified and unique serial number for tracing

Safety mechanism:

overheat protection

Controller:

Analog phase controller with control knob

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Torque	Moisture range	Speed	Capacity	Stirrer diameter	Temperature range	Packing size	Viscosity (mPas)
DH.WOS01210	HS-50A unit 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Analog, integrated	70 Ncm at chuck	80% RH	200 - 3000 rpm	max. 10 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 5000 mPas
DH.WOS01211	HS-50A set 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Analog, integrated	70 Ncm at chuck	80% RH	200 - 3000 rpm	max. 10 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 5000 mPas
DH.WOS01215	HS-120A unit 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Analog, integrated	80 Ncm at chuck	80% RH	200 - 3000 rpm	max. 20 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 10000 mPas
DH.WOS01216	HS-120A set 230 V	High-speed	90 mm	145 mm	180 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for low- to medium-viscosity materials	Analog, integrated	80 Ncm at chuck	80% RH	200 - 3000 rpm	max. 20 l	Shafts Ø8 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 10000 mPas

Overhead stirrer HT-DX High-Torque 50-1000 rpm 60,000/90,000 mPas digital internal controller

Ideal for:

all mixing applications in the laboratory
specialized for light watery solutions up to high-viscosity fluids

Features:

maximal 40 / 60 liter
50 - 1,000 rpm
maximal viscosity 60,000 / 90,000 mPas
worm-geared motor (ratio 3.5:1)
digital LCD display
smooth start and change of stirring speed while operation
storage function for timer and speed
impeller height adjustable
chrome-plated stainless steel chuck
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
overload protection
overheat protection
operation LEDs

Controller:

Jog-Shuttle controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Torque	Moisture range	Speed	Capacity	Stirrer diameter	Temperature range	Packing size	Viscosity (mPas)
DH.WOS01051	HT-50DX unit 230 V	High-torque	90 mm	180 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Digital, integrated	180 Ncm at chuck	80% RH	50 - 1000 rpm	max. 40 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 60000 mPas
DH.WOS01052	HT-50DX set 230 V	High-torque	90 mm	180 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Digital, integrated	180 Ncm at chuck	80% RH	50 - 1000 rpm	max. 40 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 60000 mPas
DH.WOS01071	HT-120DX unit 230 V	High-torque	90 mm	210 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Digital, integrated	210 Ncm at chuck	80% RH	50 - 1000 rpm	max. 60 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 90000 mPas
DH.WOS01072	HT-120DX set 230 V	High-torque	90 mm	210 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Digital, integrated	210 Ncm at chuck	80% RH	50 - 1000 rpm	max. 60 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 90000 mPas

Overhead stirrer HT-T, High-Torque, 50-1000 rpm, 100000/150000 mPas, digital, external controller

Ideal for:

all mixing applications in the laboratory
specialized for light watery solutions up to high-viscosity fluids
convenient for applications where remote control is needed

Features:

maximal 40 / 60 liter
50 - 1,000 rpm
maximal viscosity 100,000 / 150,000 mPas
worm-geared motor (ratio 3.5:1)
digital LCD display
smooth start and change of stirring speed while operation
storage function for timer and speed
impeller height adjustable
chrome-plated stainless steel chuck
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
overload protection
overheat protection
operation LEDs

Controller:

Jog-Shuttle remote controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Torque	Moisture range	Speed	Capacity	Stirrer diameter	Temperature range	Packing size	Viscosity (mPas)
DH.WOS01065	HT-50T unit 230 V	High-torque	155 mm	180 mm	110 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids, convenient for applications where remote control is needed	Digital, remote	300 N cm at chuck	80% RH	50 - 1000 rpm	max. 40 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	580 x 340 x h230 mm	max. 100000 mPas
DH.WOS01066	HT-50T set 230 V	High-torque	155 mm	180 mm	110 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids, convenient for applications where remote control is needed	Digital, remote	180 Ncm at chuck	80% RH	50 - 1000 rpm	max. 40 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	580 x 340 x h230 mm	max. 60,000 mPas
DH.WOS01075	HT-120T unit 230 V	High-torque	155 mm	230 mm	110 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids, convenient for applications where remote control is needed	Digital, remote	210 Ncm at chuck	80% RH	50 - 1000 rpm	max. 60 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	580 x 340 x h230 mm	max. 90,000 mPas
DH.WOS01076	HT-120T set 230 V	High-torque	155 mm	230 mm	110 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids, convenient for applications where remote control is needed	Digital, remote	210 Ncm at chuck	80% RH	50 - 1000 rpm	max. 60 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	580 x 340 x h230 mm	max. 90,000 mPas

Overhead stirrer HT-AX, High-Torque, 50-1000 rpm, 60,000/90,000 mPas, analog, internal controller

Ideal for:

all mixing applications in the laboratory
specialized for light watery solutions up to high-viscosity fluids

Features:

maximal 40 / 60 liter
50 - 1,000 rpm
maximal viscosity 60,000 / 90,000 mPas
worm-geared motor (ratio 3.5:1)
smooth start and change of stirring speed while operation
impeller height adjustable
chrome-plated stainless steel chuck
CE certified and unique serial number for tracing

Safety mechanism:

overheat protection
overload protection
operation LEDs

Controller:

Analog phase controller with control knob

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Torque	Moisture range	Speed	Capacity	Stirrer diameter	Temperature range	Packing size	Viscosity (mPas)
DH.WOS01251	HT-50AX unit 230 V	High-torque	90 mm	180 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Analog, integrated	180 Ncm at chuck	80% RH	50 - 1000 rpm	max. 40 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 60000 mPas
DH.WOS01252	HT-50AX set 230 V	High-torque	90 mm	180 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Analog, integrated	180 Ncm at chuck	80% RH	50 - 1000 rpm	max. 40 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 60000 mPas
DH.WOS01271	HT-120AX unit 230 V	High-torque	90 mm	210 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Analog, integrated	210 Ncm at chuck	80% RH	50 - 1000 rpm	max. 60 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 90000 mPas
DH.WOS01272	HT-120AX set 230 V	High-torque	90 mm	210 mm	130 mm	ABS & Aluminium	All mixing applications in the laboratory, specialized for light watery solutions up to high-viscosity fluids	Analog, integrated	210 Ncm at chuck	80% RH	50 - 1000 rpm	max. 60 l	Shafts Ø10 mm or less	Ambient temperature +0°C - 40°C	320 x 300 x h180 mm	max. 90000 mPas

Homogenizer HG-15D, 27000 rpm, digital external controller

Ideal for:

all disperging and homogenizing applications
designed for liquid and tissue samples

Features:

2,000 - 27,000 rpm
working range 1 - 2,500 ml
digital LCD display on remote controller
timer from 10 sec. up to 15 min.
CE certified and unique serial number for tracing

Safety mechanism:

timer-end alarm
locking mode
overload protection
overheat protection

Controller:

Jog-Shuttle remote controller with touch-button

Artikelliste

Order number	Model	Version	Length (inner)	Width (Outer)	Length (outer)	Height (outer)	Diameter (outer)	Material	Ideal for	Controller	Moisture range	Speed	Capacity	Motor rating	Temperature range	Packing size
DH.WHG02018	HG-15D unit 230 V	Unit	Extension arm: 250 mm	60 mm	75 mm	215 mm	Extension arm size: Ø12.7	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for liquid and tissue samples	Digital, remote	85% RH	2000 - 27000 rpm, resolution: 10 rpm	1 - 2500 ml	Input: 300 W, output: 160 W	Ambient temperature +5 - 50°C	580 x 340 x h230 mm
DH.WHG02019	HG-15D set A 230 V	Set A	Extension arm: 250 mm	60 mm	75 mm	215 mm	Extension arm size: Ø12.7	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for liquid and tissue samples	Digital, remote	85% RH	2000 - 27000 rpm, resolution: 10 rpm	1 - 2500 ml	Input: 300 W, output: 160 W	Ambient temperature +5 - 50°C	580 x 340 x h230 mm
DH.WHG02020	HG-15D set B 230 V	Set B	Extension arm: 250 mm	60 mm	75 mm	215 mm	Extension arm size: Ø12.7	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for liquid and tissue samples	Digital, remote	85% RH	2000 - 27000 rpm, resolution: 10 rpm	1 - 2500 ml	Input: 300 W, output: 160 W	Ambient temperature +5 - 50°C	580 x 340 x h230 mm

Homogenizer HG-15A, 27000 rpm, analog internal controller

Ideal for:

all disperging and homogenizing applications
designed for liquid and tissue samples

Features:

up to 27,000 rpm
working range 1 - 2,500 ml
CE certified and unique serial number for tracing

Safety mechanism:

overheat protection

Controller:

analog stepless controller with touch-button

Artikelliste

Order number	Model	Version	Length (inner)	Width (Outer)	Length (outer)	Height (outer)	Diameter (outer)	Material	Ideal for	Controller	Moisture range	Speed	Capacity	Motor rating	Temperature range	Packing size
DH.WHG02015	HG-15A unit 230 V	Unit	Extension arm: 250 mm	60 mm	75 mm	215 mm	Extension arm size: Ø12.7	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for liquid and tissue samples	Analog, integrated	85% RH	up to 27000 rpm, stepless	1 - 2500 ml	Input: 300 W, output: 160 W	Ambient temperature +5 - 50°C	320 x 300 x h190 mm
DH.WHG02016	HG-15A set A 230 V	Set A	Extension arm: 250 mm	60 mm	75 mm	215 mm	Extension arm size: Ø12.7	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for liquid and tissue samples	Analog, integrated	85% RH	up to 27000 rpm, stepless	1 - 2500 ml	Input: 300 W, output: 160 W	Ambient temperature +5 - 50°C	320 x 300 x h190 mm
DH.WHG02017	HG-15A set B 230 V	Set B	Extension arm: 250 mm	60 mm	75 mm	215 mm	Extension arm size: Ø12.7	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for liquid and tissue samples	Analog, integrated	85% RH	up to 27000 rpm, stepless	1 - 2500 ml	Input: 300 W, output: 160 W	Ambient temperature +5 - 50°C	320 x 300 x h190 mm

Homogenizer HS-30E, 200-5000 rpm, analog internal controller

Ideal for:

all disperging and homogenizing applications
designed for tissue grinders

Features:

200 - 5,000 rpm
working range up to 10,000 ml
CE certified and unique serial number for tracing

Safety mechanism:

overheat protection

Controller:

analog stepless controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Moisture range	Speed	Capacity	Motor rating	Temperature range	Packing size
DH.WOS01010	HS-30E unit 230 V	Unit	90 mm	145 mm	180 mm	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for tissue grinders	Analog, integrated	85% RH	200 - 5000 rpm, resolution: 85 N cm	up to 10000 ml	Input: 85 W, output: 75 W; 1/10 HP	Ambient temperature +5 - 50°C	320 x 300 x h190 mm
DH.WOS01011	HS-30E set 230 V	Set	90 mm	145 mm	180 mm	ABS & aluminium die-casting	all disperging and homogenizing applications, designed for tissue grinders	Analog, integrated	85% RH	200 - 5000 rpm, resolution: 85 N cm	up to 10000 ml	Input: 85 W, output: 75 W; 1/10 HP	Ambient temperature +5 - 50°C	320 x 300 x h190 mm

Rocker RK 5-50rpm angel 6°/9°

Ideal for:

gel staining, destaining, blotting, cell culture, hybridization and washing

Features:

5 - 50 rpm
290x200 mm or 300x300 mm
tilt angle can be set to ±6° and ±9°
digital LCD display
smooth start and change of rocking speed while operation
timer for 0-99 hours
stainless steel platform with non-slip rubber pad included
optional stackable second platform available
14W geared DC motor
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
operation LEDs
overload protection
locking mode

Controller:

programmable Jog-Shuttle controller with touch-button

Artikelliste

Order number	Model	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Controller	Speed	Motor rating	Plate size	Shaking motion	Packing size	Angle	Max. load
DH.WRK01010	RK-1D 230 V	290 mm	240 mm	150 mm	Gel staining, destaining, blotting, cell culture, hybridization and washing	Digital	5-50 rpm	14 W geared DC motor	290 x 200 mm (included)	Rocker motion	450 x 350 x h250 mm	+6° or +9° (factory default +9°)	8 kg
DH.WRK01020	RK-2D 230 V	300 mm	360 mm	155 mm	Gel staining, destaining, blotting, cell culture, hybridization and washing	Digital	5-50 rpm	14 W geared DC motor	300 x 300 mm (included)	Rocker motion	450 x 350 x h250 mm	+6° or +9° (factory default +9°)	10 kg

5 From 15