The following products have been found matching your search "on": 355

Filter

8 From 15

No results were found for the filter!

Autoclave WAC-47/60/80 Liter 121°C with basket

Ideal for:

biotechnology, clinical, environmental, medical and food industry

Features:

stainless steel wire basket (2 pcs. included) and pressure vessel
powder-coated steel body
top loading sterilizer for loading of large working volume
thermal printer (record paper roll w58/ Ø 40 mm) (WAC-R)
solid and liquid mode
with casters for excellent mobility
digital backlight LCD display
digital timer function – delay time and operation time can be controlled
built-in recorder: print sterilization data (only WAC-R)
high-quality backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
automatic over pressure release valve & heat-protective lid
error alarm, power failure and temperature error
water low level detection
electronic door lock sensing system (locks the door over 80°C)

Controller:

digital fuzzy controller (fully automatic)

Artikelliste

Order number	Model	Version	Height (inner)	Diameter (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Pressure	Heating power	Capacity	Basket	Temperature range	Temperature accuracy	Packing size
DH.WAC05047P	WAC-47 230 V	Lever type sliding door/ safety electronic door closing system, PED (pressure equipment directive) certification	670 mm	Ø300 mm	700 mm	470 mm	1080 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	2000 W	47 l	Ø270 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	700 x 470 x 1,080 mm
DH.WAC05060P	WAC-60 230 V	Lever type sliding door/ safety electronic door closing system, PED (pressure equipment directive) certification	650 mm	Ø350 mm	700 mm	470 mm	1080 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	3000 W	60 l	Ø320 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	840 x 610 x 1252 mm
DH.WAC07080P	WAC-80 3 Phase	Lever type sliding door/ safety electronic door closing system, PED (pressure equipment directive) certification	650 mm	Ø400 mm	810 mm	580 mm	1140 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	2 x 2000 W	80 l	Ø370 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	950 x 730 x 1352 mm
DH.WACR2047P	WAC-R47 230 V	Lever type sliding door/ safety electronic door closing system, recorder-type: built-in recorder printer, sterilization cycle data (date, temperature, pressure, time, error status, etc.), PED (pressure equipment directive) certification	670 mm	Ø300 mm	700 mm	470 mm	1080 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	2000 W	47 l	Ø270 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	840 x 610 x 1252 mm
DH.WACR2060P	WAC-R60 230 V	Lever type sliding door/ safety electronic door closing system, recorder-type: built-in recorder printer, sterilization cycle data (date, temperature, pressure, time, error status, etc.), PED (pressure equipment directive) certification	650 mm	Ø350 mm	700 mm	470 mm	1080 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	3000 W	60 l	Ø320 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	840 x 610 x 1252 mm
DH.WACR3080P	WAC-R80 3 Phase	Lever type sliding door/ safety electronic door closing system, recorder-type: built-in recorder printer, sterilization cycle data (date, temperature, pressure, time, error status, etc.), PED (pressure equipment directive) certification	650 mm	Ø400 mm	810 mm	580 mm	1140 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	2 x 2000 W	80 l	Ø370 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	950 x 730 x 1352 mm

Filter holder Sets with vacuum pumps

Rocker 300 & LF30

general filtration in laboratories
suspended solid test
microbiological tests

Rocker 300 & MF31

general filtration in laboratories
suspended solid test
microbiological tests

Rocker 300C & VF12

purification of organic, corrosive liquids such as solvent (mobile phase) for HPLC analysis

Chemker 300 & VF12

purification of organic, corrosive liquids such as solvent (mobile phase) for HPLC analysis

Artikelliste

Order number	Model	Version	Material	Ideal for	Connections	Capacity	Pump performance
00829 167305-22	Rocker 300 & LF30 230 V	Oil free vacuum pump Rocker 300 230 V, filtration set LF30, silicone tube (1m)	Waste bottle: PC; funnel: PES	General filtration in laboratories, air sampling, suspended solid test	Spin-lock connection	Funnel: 300 ml, receiver flask: 1200 ml	20 l/min, 106 mbar
00829 167311-22	Rocker 300 & MF31 230 V	Oil free vacuum pump Rocker 300 230 V, filtration set MF31, silicone tube (1m)	Receiver flask: PC; funnel: PES	General filtration in laboratories, air sampling, suspended solid test	magnetic connections	Funnel: 300 ml, receiver flask: 1000 ml	20 l/min, 173 mbar
00829 189302-22	Rocker 300 & VF12 230 V	Oil free vacuum pump Rocker 300 230 V, filtration set VF12, silicone tube (1m)	Receiver flask: glass; funnel: glass	Purification of organic, corrosive liquids such as solvent (mobile phase) for HPLC analysis	Aluminium clamp connection	Funnel: 300 ml, receiver flask: 1000 ml	20 l/min, 173 mbar
00829 169302-22	Chemker 300 & VF12 230 V	Chemical-resistant vacuum pump Chemker 300 230 V, filtration set VF12, silicone tube (1m)	Receiver flask: glass; funnel: glass	Purification of organic, corrosive liquids such as solvent (mobile phase) for HPLC analysis	Aluminium clamp connection	Funnel: 300 ml, receiver flask: 1000 ml	18 l/min, 120 mbar

Vacuum filtration system Lafil 400 22/25L/min -720mmHg with integrated vacuum pump

Ideal for:

filtration for microbiology tests
suspended solid tests
general laboratory filtration
vacuum filtration
cell culture aspiration
laboratory waste suction

Features:

-720 mmHg
up to 25 l/min
combines vacuum source with filtration accessories
compact design
different sets available
CE certified

Artikelliste

Order number	Model	Width (Outer)	Length (outer)	Height (outer)	Diameter (outer)	Filter	Material	Ideal for	Power supply	Connections	Speed	Capacity	Vacuum range	Accessories	Flow rate
00829 197400-22	Lafil 400 230V	23 mm	33.5 mm	45 cm				Filtration for microbiology tests, suspended solid tests, general laboratory filtration, vacuum filtration, cell culture aspiration, laboratory waste suction	Current 0.4 A	5/16 inch (8 mm)	Motor ration: 1450 rpm		max. 33 mbar		25 l/Min
00829 197401-22	Lafil 400 230V with LF 30	23 mm	33.5 mm	45 cm	Filter: Ø47 mm	Filter: 25 mm, 0.2 μm	Filter funnel: PES; waste bottle: PC; funnel support base: PP; funnel lid: PP (containing PTFE syringe filter); overflow protection: PP	Filtration for microbiology tests, suspended solid tests, general laboratory filtration, vacuum filtration, cell culture aspiration, laboratory waste suction	Current 0.4 A	5/16 inch (8 mm)	Motor ration: 1450 rpm	Funnel: 300 ml, waste bottle: 1200 ml	max. -720 mmHg		22 l/Min
00829 197402-22	Lafil 400 230V with SF10	23 mm	33.5 mm	45 cm	Filter: Ø47 mm		Filter funnel: stainless steel SUS316; waste bottle: PC; funnel support base: stainless steel SUS316; overflow protection: PP	Filtration for microbiology tests, suspended solid tests, general laboratory filtration, vacuum filtration, cell culture aspiration, laboratory waste suction	Current 0.4 A	5/16 inch (8 mm)	Motor ration: 1450 rpm	Funnel: 100 ml, waste bottle: 1200 ml	max. -720 mmHg		22 l/Min
00829 197404-22	Lafil 400 230V with LF 5a	23 mm	33.5 mm	45 cm	Filter: Ø47 mm		Filter funnel: PES; tissue bottle: borosilicate glass; funnel support base: PP	Filtration for microbiology tests, suspended solid tests, general laboratory filtration, vacuum filtration, cell culture aspiration, laboratory waste suction	Current 0.4 A	5/16 inch (8 mm)	Motor ration: 1450 rpm	Funnel: 500 ml, bottle: 500 ml	max. -720 mmHg		22 l/Min
00829 197405-22	Lafil 400 plus 230V						Suction bottle: PC; 1-channel tip adaptor with ejector: POM; 8-channel tip adaptor with ejector: POM; 1-channel tip adaptor (150 mm): POM	Filtration for microbiology tests, suspended solid tests, general laboratory filtration, vacuum filtration, cell culture aspiration, laboratory waste suction				Suction bottle: 1200 ml	max. -540 mmHg	Handle, 1-channel tip adaptor and 8-channel tip adaptor

Rocker 300 with filtration set SF10, burner and membrane - 00829 167306-22

Rocker 300 230 V with 100 ml stainless steel filtration set SF10, burner and membrane:

Rocker 300:
oil-free vacuum pump, lubricant
and oil free piston, maintenance-free,
ProteTM filter, thermal protection device, CE certified,
AC 230 V, max. vacuum -680 mmHg , flow rate 21 l/min,
motor ratio 1450 rpm, 1/8 HP, port thread 5/16 inch (8 mm),
moisture trap, overflow protection, 26.8 x 13.5 x 20.4 cm,
4.1 kg, *new model*

Stainless steel filtration set SF10 complete:
stainless steel filter 100 ml , 47 mm with SF-spin-lock,
stainless steel support base with spin lock,
stainless steel support screen, stopper and
PC waste bottle 1200 ml with cover, cap and
overflow protection
MCE membrane 47 mm, 0.45 µm,
200/pack
torch burner

Reaction vessel 500ml DN100 - 0 996 263

Reaction vessel 500ml, DN100, with groove, graduated cylindrical with thermostatic jacket, 2xGL18, with drawal valve 10 mm Normschliff version, outer Ø130 mm inner Ø100 mm height 230mm, borosilicate glass 3.3

Dropping funnel 100ml 2 x ST 14/23 - 1 895 013

Dropping funnel, with pressure equalization, cylindrical, graduated, with Drip-Nozzle, ST-stopcock, , with screw thread retaining nut, 100:2ml, 2 x ST 14/23, bore: 2,5mm, Pack = 2 pcs

Magnetic stirrer with hotplate MSH-500D digital 500°C 1500 rpm

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials
heat-sensitive procedures in microbiology and biochemistry
sample drying and general lab heating applications where high temperature is needed

Features:

up to 500°C
digital display with backlight
high-quality solid ceramic plate 200x200 mm
heat-, chemical- and acid-resistant
shade motor for 80-1.500 rpm
enormous strength of magnet
perfect heat uniformity from the inner to the edge
no liquid can get into the body
powder-coated aluminium body
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

hot top indicator lamp
high quality insulation (BTU)
timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Dial controller with touch-button for precise temperature control

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Power supply	Controller	Housing material	Speed	Heating power	Plate size	Plate material	Temperature control resolution	Temperature range	Temperature accuracy	Packing size
DH.WMH05020	MSH-500D Unit 230 V	Unit	205 mm	345 mm	135 mm	230 V, 50/60 Hz	Digital	powder-coated aluminium	80 - 1.500 rpm	850 W	200 x 200 mm	solid ceramic plate	0.1°C display, 0.5°C control	max. 500°C	±0,3°C	450 x 280 x 160 mm
DH.WMH04020	MSH-500D Set 230 V	Set	205 mm	345 mm	135 mm	230 V, 50/60 Hz	Digital	pulverbeschichtetes Aluminium	80 - 1.500 U/Min.	850 W	200 x 200 mm	solide Keramikplatte	Anzeige 0,1°C, Steuerung 0,5°C	max. 500°C	±0,3°C	450 x 280 x 160 mm

Hotplate HP-500D digital, 500°C

Ideal for:

sample drying and general lab heating applications where high temperature is needed

Features:

up to 500°C
digital display with backlight
high-quality solid ceramic plate 200x200 mm
heat-, chemical- and acid-resistant
perfect heat uniformity from the inner to the edge
no liquid can get into the body
powder-coated aluminium body
CE certified and unique serial number for tracing

Safety mechanism:

hot top indicator lamp
high quality insulation (BTU)
timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Dial controller with touch-button for precise temperature control

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Version with filter	Controller	Housing material	Heating power	Plate size	Plate material	Temperature control resolution	Temperature range	Temperature accuracy
DH.WHP05020	HP-500D Unit 230V	Unit	205 mm	345 mm	135 mm	rectangular	Digital	powder-coated aluminium	850 W	200 x 200 mm	solid ceramic plate	0.1°C display, 0.5°C control	max. 500°C	±0.3°C
DH.WHP04020	HP-500D Set 230V	Set	205 mm	345 mm	135 mm	rectangular	Digital	powder-coated aluminium	850 W	200 x 200 mm	solid ceramic plate	0.1°C display, 0.5°C control	max. 500°C	±0.3°C

Dry bath HB-48 one block, up to 150°C

Ideal for:

enzyme reactions, inactivation of sera, incubation and other laboratory procedures
multifunctional dry block heater

Features:

user‘s self-compensation function to offset between real temperature and indicated temperature (±10.0°C)
ergonomic design and modular block
interchangeable block (90 x 120 x 60 mm) for various tubes
molded heater (300W) for temperature accuracy
internal PPS bath ensures best insulation, block made of anodized aluminium
precise temperature control
digital timer function – delay time and operation control
block extraction tongs “BLE101” & block cover are included
storage function for the set values of temperature and timer
various kinds of blocks are offered (optional)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

digital fuzzy controller with Jog-Dial and main touch button

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Power consumption	Temperature range	Temperature accuracy	Packing size	Sensor
DH.WHB00348	HB-48 Unit 230V	-	90 mm	120 mm	60 mm	210 mm	309 mm	144 mm	approx. 5°C/min	300 W	ambient to +5°C to 150°C	±0.1 at 37°C, ±0.2°C at 90°C, ±0.4°C at 135°C	400 x 270 x 200 mm	Temperature sensor PT100
DH.WHB00349	HB-48 Set 230V	48 holes for 1.5/2 ml centrifuge tubes	90 mm	120 mm	60 mm	210 mm	309 mm	144 mm	approx. 5°C/min	300 W	ambient to +5°C to 150°C	±0.1 at 37°C, ±0.2°C at 90°C, ±0.4°C at 135°C	400 x 270 x 200 mm	Temperature sensor PT100

Pourer with screw thread - 0 778 245

Pourer with screw thread GL14 at the spout, version "small" for flasks GL45 size 100 - 500 ml, screw cap GL14 PBTP with PTFE liners, function stop, screw cap GL45 PBTP - top with hole, 42x26 mm, PTFE-vulcanised silicone gaskets

Pourer with screw thread - 0 778 345

Pourer with screw thread GL14 at the spout, version "small" for flasks GL45 size 1000 - 10000 ml, screw cap GL14 PBTP with PTFE liners, function stop, screw cap GL45 PBTP - top with hole, 42x26 mm, PTFE-vulcanised silicone gaskets

Blood sedimentation apparatus acc. to Westergren - 4 200 005

Blood sedimentation apparatus acc. to Westergren,
metal support, for 5 examinations, stainless steel,
complete with special laminated springs,
w. pipettes and specimen tube with rubber stopper
*** without CE marking;
only for sale and use outside the EU ***

Blood sedimentation tube clear acc. Westergren - 4 230 001

Blood sedimentation tube, Westergren,
300 mm length, division 0-200:1 mm, clear glass
*** without CE marking;
only for sale and use outside the EU ***

Blood sedimentation tubes acc. Westergren - 4 230 002

Blood sedimentation tubes, acc. Westergren,
300 mm length, t.0-200:1 mm, white graduated
*** without CE marking;
only for sale and use outside the EU ***

Blood sedimentation tubes clear acc. Westergren with roll - 4 235 001

Blood sedimentation tubes, overall length: 300 mm,
acc. Westergren / Adler, with roll , clear glass
*** without CE marking;
only for sale and use outside the EU ***

LABORATORY BOTTLES 20000ml - 5 061 020

Laboratory bottles, boro-glass, 20 000 ml, w. safety coating Witoform, without screw cap and pouring ring

Flexible discharge tubing PTFE - 5 375 002 R

Flexible discharge tubing, PTFE, 180 cm, coiled, complete, with tubing support, for dispenser 2,5-10 ml O.Ø 3 mm, I.Ø 2 mm

MINISPENSOR-discharge tube (canula) - 5 375 003 M

MINISPENSOR-discharge tube, (canula), bent with fine tip, made of FEP, with cap nut 25 - 100 µl

Flexible discharge tubing for LABMAX, 25-100 ml - 5 375 012 R

Flexible discharge tubing for LABMAX, 25-100 ml, O.D. 6 mm, I.D. 4 mm, length: 180 cm

Discharge tubes for MINISPENSOR bent - 5 375 015

Discharge tubes for MINISPENSOR, bent, 1000 - 2000 µl

MINISPENSOR filling tube made of FEP - 5 375 016

MINISPENSOR filling tube, made of FEP, volume range from 1000 - 2000 µl

Pipette tips 5 - 200 µl Eppendorf - 5 408 200 B

Pipette tips 5 - 200 µl, Eppendorf yellow color, for Socorex-Nichiryo-Gilson-Brand-Biohit, Case = 1000 pcs.

PIPETTE TIPS 10 - 300 UL NEUTRAL - 5 409 100 B

PIPETTE TIPS 10 - 300 UL, NEUTRAL, FOR EPPENDORF-BIOHIT-GILSON, GRADUATED, CASE = 96 PCS

PIPETTE TIPS 1000 - 5000 UL LIGHTY BLUE - 5 409 110 B

PIPETTE TIPS 1000 - 5000 UL, LIGHTY BLUE, FOR SOCOREX, GILSON, NICHIRYO, CASE = 1000 PCS

PIPETTE TIPS 5 - 200 UL NEUTRAL - 5 409 200 NB

PIPETTE TIPS 5 - 200 UL, NEUTRAL, FOR EPPENDORF-SOCOREX-NICHIRYO- GILSON-BRAND-BIOHIT, CASE = 96 PCS

8 From 15