The following products have been found matching your search "pr": 123

Filter

2 From 5

No results were found for the filter!

Magnetic stirrer with hotplate MSH-D digital, up to 380°C, 80-1,500 rpm

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials
heat-sensitive procedures in microbiology and biochemistry
sample drying and general lab heating applications where high temperature is needed

Features:

up to 380°C
shade motor for 80-1,500 rpm
digital display with backlight
ceramic-coated aluminium plate 180x180 / 260x260 mm
heat-, chemical- and restricted acid-resistant
no liquid can get into the body
powder-coated body
easy to clean
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Shuttle controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Power supply	Version with filter	Controller	Housing material	Speed	Heating power	Capacity	Plate size	Plate material	Temperature control resolution	Temperature range	Temperature accuracy	Packing size
DH.WMH03020	MSH-20D unit 230 V	Unit, brushless motor	206 mm	307 mm	99 mm	230 V, 50/60 Hz	rectangular	Digital	Powder-coated aluminium	80 - 1500 rpm	600 W	20 l	180 x 180 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	400 x 280 x h200 mm
DH.WMH03021	MSH-20D set 230 V	Set, brushless motor	206 mm	307 mm	99 mm	230 V, 50/60 Hz	rectangular	Digital	Powder-coated aluminium	80 - 1500 rpm	600 W	20 l	180 x 180 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	400 x 280 x h200 mm
DH.WMH03022	MSH-30D unit 230 V	Unit, carbon brush motor	286 mm	387 mm	99 mm	230 V, 50/60 Hz	rectangular	Digital	Powder-coated steel	80 - 1500 rpm	1200 W	20 l	260 x 260 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	430 x 320 x h200 mm
DH.WMH03023	MSH-30D set 230 V	Set, carbon brush motor	286 mm	387 mm	99 mm	230 V, 50/60 Hz	rectangular	Digital	Powder-coated steel	80 - 1500 rpm	1200 W	20 l	260 x 260 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	430 x 320 x h200 mm

Magnetic stirrer with hotplate MSH-A analog, 70°C to 380°C, up to 1500rpm

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials
heat-sensitive procedures in microbiology and biochemistry
sample drying and general lab heating applications

Features:

70°C to 380°C
up to 1.500 rpm
ceramic-coated aluminium plate 180x180 / 260x260 mm
heat-, chemical- and restricted acid-resistant
no liquid can get into the body
powder-coated body
easy to clean
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

operation LEDs

Controller:

PWM controller

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Version with filter	Controller	Housing material	Speed	Heating power	Capacity	Plate size	Plate material	Temperature range with filter	Packing size
DH.WMH03120	MSH-20A 230 V	brushless motor	206 mm	307 mm	99 mm	rectangular	Analog	Powder-coated aluminium	1500 rpm	600 W	20 l	180 x 180 mm	Ceramic-coated aluminium	380°C	400 x 280 x h200 mm
DH.WMH03121	MSH-30A 230 V	carbon brush motor	286 mm	387 mm	99 mm	rectangular	Analog	Powder-coated steel	1500 rpm	1200 W	20 l	260 x 260 mm	Ceramic-coated aluminium	380°C	430 x 320 x h200 mm

Magnetic stirrer with hotplate SMHS 3/6 places 350°C 1500rpm

Ideal for:

multiple mixing and heating applications at the same time
mixing of chemical, laboratory and pharmaceutical materials
heat-sensitive procedures in microbiology and biochemistry
sample drying and general lab heating applications

Features:

each place individually adjustable
digital Jog-Dial controller for each place
up to 350°C
up to 1.500 rpm
ceramic-coated aluminium plate with 3 or 6 places 140x140 mm
heat-, chemical- and restricted acid-resistant
no liquid can get into the body
powder-coated steel body
easy to clean
30 mm stirrer bar included (3x / 6x)
up to 3 temperature probes possible (3 & 6 place-type)
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Dial controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Connections	Controller	Housing material	Speed	Heating power	Capacity	Plate size	Plate material	Temperature control resolution	Temperature range with filter	Temperature accuracy	Packing size
DH.WMH03503	SMHS-3 230 V	3 stirring points	240 mm	510 mm	100 mm	3 temperature sensor ports, 3 stand rod sockets	Digital	Powder-coated steel	80 - 1500 rpm	3 x 400 W	20 l	140 x 140 mm (each place)	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	350°C	±0.3°C	540 x 330 x h170 mm
DH.WMH03506	SMHS-6 230 V	6 (2x3) stirring points	410 mm	510 mm	180 mm	3 temperature sensor ports, 6 stand rod sockets	Digital	Powder-coated steel	80 - 1500 rpm	6 x 400 W	20 l	140 x 140 mm (each place)	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	350°C	±0.3°C	570 x 540 x h230 mm

Dry bath (Incubator) H-20 1 block up to 150°C

Ideal for:

enzyme reactions, inactivation of sera, incubation and other laboratory procedures
multifunctional dry block heater

Features:

user‘s self-compensation function to offset between real temperature and indicated temperature (±10.0°C)
ergonomic, compact design and modular block
internal PPS bath ensures best insulation, block made of anodized aluminium
precise temperature control
digital timer function – delay time and operation control
convenient integrated timer for time-sensitive incubations
block removal tool with screw thread included
storage function for the set values of temperature and timer
various block types (optional)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

digital fuzzy controller with Jog-Dial and main touch button

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Power consumption	Temperature range	Temperature accuracy	Packing size	Sensor
DH.WHB02000	H-20 Einheit 230 V		90 mm	120 mm	60 mm	226 mm	178 mm	138 mm	approx. 5°C/min	300 W	Room temperature +5°C to 150°C	±0.1°C at 37°C, ±0.2°C to 90°C, ±0.4°C at 135°C	230 x 290 x 245 mm	Temperature sensor PT100
DH.WHB02100	H-20 Set 230 V	incl. standard block with 48 holes for 1.5/2 ml centrifuge tubes	90 mm	120 mm	60 mm	226 mm	178 mm	138 mm	approx. 5°C/min	300 W	Room temperature +5°C to 150°C	±0.1°C at 37°C, ±0.2°C to 90°C, ±0.4°C at 135°C	230 x 355 x 245 mm	Temperature sensor PT100

Heating mantles and tapes Controller digital - DH.WHM12500

Ideal for:

all-purpose heating instruments)

Features:

user‘s self-compensation function to offset between actual and displayed temperature (±50.0°C)
digital feedback control by high-performance microprocessor
small footprint and user-friendly design
storage function, alarm, timer and locking mode
heating instruments can be controlled up to 2kW
accurate temperature control of the liquid in the vessel using optional direct K-type sensor
backlight LCD display)
CE certified and unique serial number for tracing)

Baths WVB Viscosity bath 100°C ±0,1°C - DH.WVB01030

Ideal for:

precise measurement with capillary viscometers

Features:

powerful circulation pump ensures highest temperature uniformity
stainless steel interior and lid with 5 holes for viscometer holder, powder-coated steel body, vacuum sealed and tempered safety glasses window
storage function for the set values of temperature and timer
digital timer function (99hr 59min): delay time and operation time can be controlled
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
drain valve mounted
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection

Controller:

digital fuzzy controller with Jog-Shuttle-switch (turn + push)

Baths WSB Shaking water bath 18/30/45 Liter 100°C ±0,1°C

Ideal for:

direct immersion of samples for shaking in the field of biotechnology and laboratories, hybridization applications, cell cultures, cell aeration, increasing solubility rates, molecular biology assays and bacterial vultures

Features:

stainless steel interior and bath, powder-coated steel body, double painted & baked body, 20 mm polyurethane-insulation
high-performance shaking engine ensures best smoothly shaking motion, minimum noise and vibration
universal stainless steel spring rack included: for various kind of flasks and tubes (up to 2l), easy to disassemble
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
drain valve mounted
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection

Controller:

Jog-Dial controller (turn + push)
digital feedback controller for precise speed control
digital fuzzy controller for precise temperature control

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Capacity	Shaking speed	Shaking stroke	Power consumption	Temperature range	Temperature fluctuation	Temperature accuracy	Packing size	Sensor
DH.WSB03018	WSB-18 230 V	max. quantity of Erlenmeyer flasks: 6 x 250 ml, 4 x 500 ml, 1 x 1000 ml	300 mm	300 mm	200 mm	563 mm	353 mm	340 mm	18 l	20 - 250 rpm, 1 rpm-display, 1 rpm-control	20 mm (other strokes on request)	1400 W	Room temperature +5°C - 100°C	±0.5°C at -20°C	±0.1°C	620 x 420 x 450 mm	Temperature sensor PT100
DH.WSB03030	WSB-30 230 V	max. quantity of Erlenmeyer flasks: 10 x 250 ml, 8 x 500 ml, 3 x 1000 ml	500 mm	300 mm	200 mm	763 mm	353 mm	340 mm	30 l	20 - 250 rpm, 1 rpm-display, 1 rpm-control	20 mm (other strokes on request)	1800 W	Room temperature +5°C - 100°C	±0.5°C at -20°C	±0.1°C	820 x 420 x 450 mm	Temperature sensor PT100
DH.WSB03045	WSB-45 230 V	max. quantity of Erlenmeyer flasks: 18 x 250 ml, 15 x 500 ml, 8 x 1000 ml	600 mm	380 mm	200 mm	863 mm	433 mm	340 mm	45 l	20 - 250 rpm, 1 rpm-display, 1 rpm-control	20 mm (other strokes on request)	2400 W	Room temperature +5°C - 100°C	±0.5°C at -20°C	±0.1°C	920 x 500 x 450 mm	Temperature sensor PT100

Incubators WIG gravity-air 32/50/105/155 Liter 70°C

Ideal for:

microorganism culture, animal and plant cell culture, constant temperature, germination, etc.

Features:

gravity-air flow preventing cross contamination of samples
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
ambient to 70°C of temperature range, fluctuation of ±0.2°C at 37°C, ±0.3°C at 50°C
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
controller SW can be upgraded through USB port
RS232C interface for monitoring and controlling (WireRemote)
storage function for the set values of temperature and timer
alarm function: error status and timer end
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and locking mode

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Hole diameter	Holes	Power consumption	Temperature variation	Temperature control resolution	Temperature range	Temperature fluctuation	Packing size	Recovery time	Sensor
DH.WIG03032	WIG-32 230 V	312 mm	290 mm	360 mm	458 mm	477 mm	624 mm	25 min. to 37°C, 40 min. to 50°C	2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	150 W	32 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	159 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	568 x 592 x 698 mm	8 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIG03050	WIG-50 230 V	370 mm	350 mm	420 mm	518 mm	537 mm	701 mm	25 min. to 37°C, 40 min. to 50°C	2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	200 W	50 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	169.9 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	628 x 652 x 775 mm	8 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIG03105	WIG-105 230 V	485 mm	410 mm	535 mm	635 mm	595 mm	841 mm	25 min. to 37°C, 40 min. to 50°C	2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	300 W	105 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	292.9 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	731 x 710 x 1018 mm	10 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100
DH.WIG03155	WIG-115 230 V	550 mm	475 mm	600 mm	700 mm	660 mm	906 mm	30 min. to 37°C, 40 min. to 50°C	2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	400 W	155 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	420.5 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	796 x 775 x 1083 mm	10 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100

Incubators SWIG gravity-air SmartLab 32/50/105/155 Liter 70°C

Ideal for:

microorganism culture, animal and plant cell culture, constant temperature, germination, etc.

Features:

gravity-air flow by natural flow preventing cross contamination of samples
temperature uniformity and accuracy by high performance 3-sided heating mechanism
2x PE-coated steel wire shelves included
corrosion resistant stainless steel chamber, powder-coated body
inner tempered glass door with silicone packing offers easy observation without door opening
ambient to 70°C of temperature range, fluctuation of ±0.2°Cat 37°C, ±0.3°C at 50°C
storage function for the set values of temperature and timer
alarm function: error status and timer end
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection

Controller:

Smart-Lab™ controller with 4? full touch screen TFT LCD:

WiRe™ app service, remote control system
variable program settings
self-diagnostic function
automatic data recording
data transfer to PC by USB memory
Internet connectivity with WiFi

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Hole diameter	Holes	Power consumption	Temperature variation	Temperature control resolution	Temperature range	Temperature fluctuation	Packing size	Recovery time	Sensor
DH.SWIG03032	SWIG-32 230 V	with Smart-LabTM controller	312 mm	290 mm	360 mm	458 mm	477 mm	624 mm	25 min. to 37°C, 40 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	150 W	32 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	159 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	568 x 592 x 698 mm	8 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.SWIG03050	SWIG-50 230 V	with Smart-LabTM controller	370 mm	350 mm	420 mm	518 mm	537 mm	701 mm	25 min. to 37°C, 40 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	200 W	50 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	169.9 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	628 x 652 x 775 mm	8 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.SWIG03105	SWIG-105 230 V	with Smart-LabTM controller	485 mm	410 mm	535 mm	635 mm	595 mm	841 mm	25 min. to 37°C, 40 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	300 W	105 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	292.9 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	731 x 710 x 1018 mm	10 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100
DH.SWIG03155	SWIG-115 230 V	with Smart-LabTM controller	550 mm	475 mm	600 mm	700 mm	660 mm	906 mm	30 min. to 37°C, 40 min. to 50°C	2 PE-coated steel wire shelves included, total load 32kg (16kg per shelf)	400 W	155 l	Inner Ø35 mm	1 ventilation hole with stainless steel cap	420.5 W	±0.6°C at 37°C, ±1.0°C at 50°C	Control ±0.1°C	Room temperature +5°C - 70°C	±0.2°C at 37°C, ±0.3°C at 50°C	796 x 775 x 1083 mm	10 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100

Incubators WIR B.O.D. 150/250/420/700 Liter 0-60°C

Ideal for:

animal and plant cell culture, constant temperature, germination test, BOD test, etc.

Features:

CFC free refrigerant (R-404A)
intelligent refrigerator control prevents compressor overload
superior temperature uniformity by forced-air convection
stainless steel chamber, powder-coated body
tempered glass door to observe samples during incubation
3x PE-coated steel wire shelves included
RS232C interface for monitoring and controlling (WireRemote)
storage function for set values: timer and temperature
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection and leakage breaker

Controller:

Jog-Dial controller (PID) with 2-way knob (turn and push), digital LCD with backlight, and two durable setting buttons

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Compressor	Refrigerant	Power consumption	Temperature variation	Temperature range	Temperature accuracy	Packing size	Recovery time	Sensor
DH.WIR03150	WIR-150 230 V	Forced-air convection	505 mm	505 mm	610 mm	640 mm	832 mm	1313 mm	20 min. to 37°C, 20 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	700 W	150 l	190 W	R-404A (CFC-free refrigerant)	1600 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	900 x 1000 x 1650 mm	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIR03250	WIR-250 230 V	Forced-air convection	505 mm	505 mm	1000 mm	640 mm	832 mm	1703 mm	20 min. to 37°C, 20 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	1000 W	250 l	250 W	R-404A (CFC-free refrigerant)	1800 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	900 x 1000 x 2040 mm	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIR03420	WIR-420 230 V	Forced-air convection	705 mm	605 mm	1000 mm	840 mm	932 mm	1753 mm	35 min. to 37°C, 35 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	1200 W	420 l	370 W	R-404A (CFC-free refrigerant)	2300 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	1100 x 1100 x 2140 mm	12 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100
DH.WIR03700	WIR-700 230 V	Forced-air convection	800 mm	700 mm	1250 mm	935 mm	1027 mm	2000 mm	35 min. to 37°C, 35 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	2000 W	700 l	370 W	R-404A (CFC-free refrigerant)	2400 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	1220 x 1220 x 2260 mm	12 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100

Incubators SWIR B.O.D. SmartLab 150/250/420/700 Liter 0 to +60°C

Ideal for:

animal and plant cell culture, constant temperature, germination test, BOD test, etc.

Features:

CFC free refrigerant (R-404A)
intelligent refrigerator control prevents compressor overload
superior temperature uniformity by forced-air convection
stainless steel chamber, powder-coated body
tempered glass door to observe samples during incubation
3x PE-coated steel wire shelves included
0°C - +60°C (refrigerated)
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker

Controller:

Smart-Lab™ controller with 4? full touch screen TFT LCD:

WiRe™ app service, remote control system
variable program settings
self-diagnostic function
automatic data recording
data transfer to PC by USB memory
Internet connectivity with WiFi

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Compressor	Refrigerant	Power consumption	Temperature variation	Temperature range	Temperature accuracy	Packing size	Recovery time	Sensor
DH.SWIR03150	SWIR-150 230 V	with Smart-LabTM controller, forced-air convection	505 mm	505 mm	610 mm	640 mm	832 mm	1313 mm	20 min. to 37°C, 20 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	700 W	150 l	190 W	R-404A (CFC-free refrigerant)	1600 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	900 x 1000 x 1650 mm	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.SWIR03250	SWIR-250 230 V	with Smart-LabTM controller, forced-air convection	505 mm	505 mm	1000 mm	640 mm	832 mm	1703 mm	20 min. to 37°C, 20 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	1000 W	250 l	250 W	R-404A (CFC-free refrigerant)	1800 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	900 x 1000 x 2040 mm	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.SWIR03420	SWIR-420 230 V	with Smart-LabTM controller, forced-air convection	705 mm	605 mm	1000 mm	840 mm	932 mm	1753 mm	35 min. to 37°C, 35 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	1200 W	420 l	370 W	R-404A (CFC-free refrigerant)	2300 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	1100 x 1100 x 2140 mm	12 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100
DH.SWIR03700	SWIR-700 230 V	with Smart-LabTM controller, forced-air convection	800 mm	700 mm	1250 mm	935 mm	1027 mm	2000 mm	35 min. to 37°C, 35 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	2000 W	700 l	370 W	R-404A (CFC-free refrigerant)	2400 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	1220 x 1220 x 2260 mm	12 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100

Incubators WIM industrial 4 chambers each 125 Liter

Ideal for:

microorganism culture, animal and plant cell culture, constant temperature, germination, etc.

Features:

forced-air flow by silent fan motor implements the highest uniformity of temperature in each chamber
4x125 liter chambers
each chamber has an independent fuzzy controller for different temperature and time control
8x PE-coated steel wire shelves included
corrosion resistant stainless steel chamber, powder-coated body
tempered glass door to observe samples during incubation
storage function for the set values of temperature and timer
backlight LCD display
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

digital fuzzy controller with Jog-Shuttle-switch (turn + push)

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Heating time	Illumination	Shelves	Heating power	Capacity	Compressor	Effective space	Power consumption	Temperature variation	Temperature range	Temperature accuracy	Recovery time	Sensor
DH.WIM04125	WIM-4 230 V	4 individual chambers, forced-air convection	1655 mm	845 mm	1710 mm	15 min. to 37°C, 30 min. to 50°C		8 PE-coated steel wire shelves included	4 x 500 W	4 chambers x 125 l		500 x 500 x 500 mm (each room)	2600 W	±0.3°C at 37°C, ±0.7°C at 50°C	Room temperature +5°C - 70°C	±0.2°C to 37°C	8 min. to 37°C, 10 min. to 50°C	Temperature sensor PT100
DH.WIM14125	WIM-R4 230 V	4 individual chambers, forced-air convection, not available in Europe	1655 mm	845 mm	1710 mm	20 min. to 37°C, 30 min. to 50°C		8 PE-coated steel wire shelves included	4 x 650 W	4 chambers x 125 l	1/4 HP (4 x chambers)	500 x 500 x 500 mm (each room)	4500 W	±0.5°C at 37°C	0°C - 60°C (refrigerated)	±0.2°C to 37°C	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIM24125	WIM-RL4 230 V	4 individual chambers, forced-air convection, not available in Europe	1655 mm	845 mm	1710 mm	20 min. to 37°C, 30 min. to 50°C	2 x FRL 55 W (x 4 chambers)	8 PE-coated steel wire shelves included	4 x 650 W	4 chambers x 125 l	1/4 HP (4 x chambers)	500 x 500 x 500 mm (each room)	4800 W	±0.5°C at 37°C	0°C - 60°C (refrigerated)	±0.2°C to 37°C	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIM16125	WIM-R4 3 Phase	4 individual chambers, forced-air convection	1655 mm	845 mm	1710 mm	20 min. to 37°C, 30 min. to 50°C		8 PE-coated steel wire shelves included	4 x 650 W	4 chambers x 125 l	1/4 HP (4 x chambers)	500 x 500 x 500 mm (each room)	4500 W	±0.5°C at 37°C	0°C - 60°C (refrigerated)	±0.2°C to 37°C	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.WIM26125	WIM-RL4 3 Phase	4 individual chambers, forced-air convection	1655 mm	845 mm	1710 mm	20 min. to 37°C, 30 min. to 50°C	2 x FRL 55 W (x 4 chambers)	8 PE-coated steel wire shelves included	4 x 650 W	4 chambers x 125 l	1/4 HP (4 x chambers)	500 x 500 x 500 mm (each room)	4800 W	±0.5°C at 37°C	0°C - 60°C (refrigerated)	±0.2°C to 37°C	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100

Incubators WIS-30 Shaking incubator front-door orbital motion

Ideal for:

biological cultures under various temperatures

Features:

front door and sliding platform provides easy loading and handling of samples
RS232C interface for monitoring and controlling (WireRemote)
advanced shaking mechanism provides quiet shaking and precise speed control
stabilized orbital motion, minimum noise and no vibration
universal platform included
accommodates flasks up to 1000 ml
durable and flexible plastic flask holder (optional)
universal spring rack for various flask shapes/sizes (optional)
stainless steel interior and powder-coated body
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
leakage breaker
automatic operation stop when door opens

Controller:

digital fuzzy controller with Jog-Shuttle-switch (turn + push)

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating power	Capacity	Compressor	Refrigerant	Shaking motion	Shaking speed	Shaking stroke	Power consumption	Temperature variation	Temperature range	Temperature accuracy	Packing size	Sensor
DH.WIS00230	WIS-30 230 V	570 mm	465 mm	470 mm	916 mm	730 mm	683 mm	600 W	35 pcs. flask holder for 100 ml flasks, 16 pcs. flask holder for 250 ml flasks, 12 pcs. flask holder for 500 ml flasks, 9 pcs. flask holder for 1000 ml flasks			Orbital motion	30 - 250 rpm	25 mm	600 W	±0.5°C at 37°C	Room temperature +5°C - 60°C	±0.2°C to 37°C	1050 x 900 x 900 mm	Temperature sensor PT100
DH.WIS01230	WIS-30R 230 V	570 mm	465 mm	470 mm	916 mm	730 mm	683 mm	800 W	35 pcs. flask holder for 100 ml flasks, 16 pcs. flask holder for 250 ml flasks, 12 pcs. flask holder for 500 ml flasks, 9 pcs. flask holder for 1000 ml flasks	190 W	134A (CFC-free refrigerant)	Orbital motion	30 - 250 rpm	25 mm	1300 W	±0.5°C at 37°C	10°C - 60°C (refrigerated)	±0.2°C to 37°C	1050 x 900 x 900 mm	Temperature sensor PT100

Incubators WIS-20 Shaking incubator bench-top orbital motion

Ideal for:

biological cultures under various temperatures

Features:

easy access to bench top by liftable door
RS232C interface for monitoring and controlling (WireRemote)
advanced shaking mechanism provides quiet shaking and precise speed control
stabilized orbital motion, minimum noise and no vibration
60W krypton lamp
universal platform included
accommodates flasks up to 1000 ml
durable and flexible plastic flask holder (optional)
universal spring rack for various flask shapes/sizes (optional)
stainless steel interior and powder-coated body
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker
automatic operation stop when door opens

Controller:

digital fuzzy controller with Jog-Shuttle-switch (turn + push)

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating power	Capacity	Compressor	Refrigerant	Shaking motion	Shaking speed	Shaking stroke	Power consumption	Temperature variation	Temperature range	Temperature accuracy	Packing size	Sensor
DH.WIS00220	WIS-20 230 V	530 mm	530 mm	350 mm	530 mm	855 mm	850 mm	500 W	32 pcs. flask holder for 100 ml flasks, 20 pcs. flask holder for 250 ml flasks, 16 pcs. flask holder for 500 ml flasks, 9 pcs. flask holder for 1000 ml flasks			Orbital motion	30 - 250 rpm	25 mm	500 W	±0.5°C at 37°C	Room temperature +5°C - 60°C	±0.2°C to 37°C	1000 x 800 x 1100 mm	Temperature sensor PT100
DH.WIS01220	WIS-20R 230 V	530 mm	530 mm	350 mm	530 mm	855 mm	850 mm	700 W	32 pcs. flask holder for 100 ml flasks, 20 pcs. flask holder for 250 ml flasks, 16 pcs. flask holder for 500 ml flasks, 9 pcs. flask holder for 1000 ml flasks	190 W	134A (CFC-free refrigerant)	Orbital motion	30 - 250 rpm	25 mm	1200 W	±0.5°C at 37°C	10°C - 60°C (refrigerated)	±0.2°C to 37°C	1000 x 800 x 1100 mm	Temperature sensor PT100

Incubators WIS-10 Shaking incubator top-door orbital motion

Ideal for:

biological cultures under various temperatures

Features:

CFC free refrigerant (R-404A)
easy access to bench top by liftable door
RS232C interface for monitoring and controlling (WireRemote)
advanced shaking mechanism provides quiet shaking and precise speed control
stabilized orbital motion, minimum noise and no vibration
60W krypton lamp (WIS-10RL)
accommodates flasks up to 1000 ml
durable and flexible plastic flask holder (optional)
universal spring rack for various flask shapes/sizes (optional)
stainless steel interior and powder-coated body
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker
automatic operation stop when door opens

Controller:

digital fuzzy controller with Jog-Shuttle-switch (turn + push)

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Illumination	Heating power	Capacity	Compressor	Refrigerant	Shaking motion	Shaking speed	Shaking stroke	Power consumption	Temperature variation	Temperature range	Temperature accuracy	Packing size	Sensor
DH.WIS00210	WIS-10 230 V	750 mm	720 mm	400 mm	1065 mm	900 mm	980 mm		800 W	68 pcs. flask holder for 100 ml flasks, 36 pcs. flask holder for 250 ml flasks, 21 pcs. flask holder for 500 ml flasks, 18 pcs. flask holder for 1000 ml flasks		R-404A (CFC-free refrigerant)	Orbital motion	30 - 250 rpm	25 mm	800 W	±0.5°C at 37°C	Room temperature +5°C - 60°C	±0.2°C to 37°C	1220 x 1060 x 1200 mm	Temperature sensor PT100
DH.WIS04210	WIS-10R 230 V	750 mm	720 mm	400 mm	1065 mm	900 mm	980 mm		1000 W	68 pcs. flask holder for 100 ml flasks, 36 pcs. flask holder for 250 ml flasks, 21 pcs. flask holder for 500 ml flasks, 18 pcs. flask holder for 1000 ml flasks	250 W	R-404A (CFC-free refrigerant)	Orbital motion	30 - 250 rpm	25 mm	1800 W	±0.5°C at 37°C	10°C - 60°C (refrigerated)	±0.2°C to 37°C	1220 x 1060 x 1200 mm	Temperature sensor PT100
DH.WIS05210	WIS-10RL 230 V	750 mm	720 mm	400 mm	1065 mm	900 mm	980 mm	Krypton lamp, 60 W	1200 W	68 pcs. flask holder for 100 ml flasks, 36 pcs. flask holder for 250 ml flasks, 21 pcs. flask holder for 500 ml flasks, 18 pcs. flask holder for 1000 ml flasks	250 W	R-404A (CFC-free refrigerant)	Orbital motion	30 - 250 rpm	25 mm	2100 W	±0.5°C at 37°C	10°C - 60°C (refrigerated)	±0.2°C to 37°C	1220 x 1060 x 1200 mm	Temperature sensor PT100

Incubators WIS-ML Shaking incubator multi-stack orbital motion

Ideal for:

multi-use and wide range of sample testing under various temperature

Features:

space saving design for large quantity samples with 2 or 4 independent shaking speed controller
CFC free refrigerant (R-404A)
control of refrigerator for preventing compressor overload
advanced shaking mechanism provides quiet shaking and precise speed control
RS232C interface for monitoring and controlling (WireRemote)
durable and flexible plastic flask holder (optional)
universal platforms included (2 or 4 according to model)
magnetic packing door with pair glass, stainless steel interior and powder-coated body
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker
automatic operation stop when door opens

Controller:

digital fuzzy controller with Jog-Shuttle-switch (turn + push)

230V and 120V models not available in Europe

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating power	Capacity	Compressor	Refrigerant	Shaking motion	Shaking speed	Shaking stroke	Power consumption	Temperature variation	Temperature range	Temperature accuracy	Packing size	Accessories	Sensor
DH.WIS05002	WIS-ML02 230 V	700 mm	700 mm	1100 mm	1290 mm	850 mm	1445 mm	1500 W	68 pcs. flask holder for 100 ml flasks (per platform), 36 pcs. flask holder for 250 ml flasks (per platform), 21 pcs. flask holder for 500 ml flasks (per platform), 16 pcs. flask holder for 1000 ml flasks (per platform)	370 W	R-404A (CFC-free refrigerant)	Orbital motion	30 - 250 rpm	25 mm	2400 W	±1.0°C at 37°C	10°C - 60°C (refrigerated)	±0.2°C to 37°C	1500 x 1200 x 1750 mm	2 stacks	Temperature sensor PT100
DH.WIS05004	WIS-ML04 230 V	700 mm	700 mm	1790 mm	1290 mm	850 mm	2125 mm	1800 W	68 pcs. flask holder for 100 ml flasks (per platform), 36 pcs. flask holder for 250 ml flasks (per platform), 21 pcs. flask holder for 500 ml flasks (per platform), 16 pcs. flask holder for 1000 ml flasks (per platform)	560 W	R-404A (CFC-free refrigerant)	Orbital motion	30 - 250 rpm	25 mm	3200 W	±1.0°C at 37°C	10°C - 60°C (refrigerated)	±0.2°C to 37°C	1500 x 1200 x 2350 mm	4 stacks	Temperature sensor PT100
DH.WIS03004	WIS-ML04 3 Phase	700 mm	700 mm	1790 mm	1290 mm	850 mm	2125 mm	1800 W	68 pcs. flask holder for 100 ml flasks (per platform), 36 pcs. flask holder for 250 ml flasks (per platform), 21 pcs. flask holder for 500 ml flasks (per platform), 16 pcs. flask holder for 1000 ml flasks (per platform)	560 W	R-404A (CFC-free refrigerant)	Orbital motion	30 - 250 rpm	25 mm	3200 W	±1.0°C at 37°C	10°C - 60°C (refrigerated)	±0.2°C to 37°C	1500 x 1200 x 2350 mm	4 stacks	Temperature sensor PT100

Freezer WLF-420, 420 Liter, -35°C to -15°C - DH.WLF00420

Ideal for:

storage of bio reagent, seed, enzyme and various samples

Features:

fast freezing function
CFC free refrigerant (R-404A), 1 HP compressor
intelligent control of refrigerator for preventing overload of compressor
3x stainless steel shelves included, 16 kg load per shelf
stainless steel interior and powder-coated steel body
storage function for the set values of temperature and timer
RS232C interface for monitoring and controlling (WireRemote)
backlight LCD display
CE, UL/CUL & RoHS certified and unique serial number for tracing

Safety mechanism:

locking mode
over-current protection
sensor error detection and leakage breaker

Controller:

digital fuzzy controller with Jog-Shuttle-switch (turn + push)

Magnetic stirrer MS-500D, digital, up to 1500rpm, 200x200mm solid ceramic plate - DH.WMS04022

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials

Features:

digital display with backlight
shade motor for 80-1,500 rpm
enormous strength of magnet
high-quality solid ceramic plate 200x200 mm
heat-, chemical- and acid-resistant
no liquid can get into the body
powder-coated aluminium body
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Dial controller with touch-button for precise speed control

Rotator RT-10, 5 - 60 rpm, angle 0° - 90° - DH.WRT00010

Ideal for:

general mixing, diffusing, dialyzing, hybridization and aerating culture
keeping biological samples in suspension

Features:

5 - 60 rpm
0-90° angle adjustable
digital LCD display
smooth start and change of rocking speed while operation
timer for 0-99 hours
5 different disks available
durable construction for long life time
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
operation LEDs
overload protection
locking mode

Controller:

programmable Jog-Shuttle controller with touch-button

Clean bench WLC-V 1350/1700/2020 m²/h with HEPA Filter

Ideal for:

protection of samples and work processes against dust and particulate contamination

Features:

class 100 HEPA filter of efficiency up to 99.97% & 0.3 micron size (easy to exchange)
mesh guard for HEPA filter protection
vertical air flow-type
optimized air flow system for uniform air flow/velocity
8 steps air velocity control
UV and fluorescent lamp, external gas connection valve, internal electrical outlet
silent and vibration-free blower (under 65 dB)
corrosion resistant 304 stainless steel working table interior, powder-coated body and tempered safety glass sliding door for protection from UV radiation
99hr 59min timer
high-quality backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

UV protection system: UV lamp is only activated when safety glass door is completely closed

Controller:

microprocessor digital controller
high performance touch input

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Filter	Ideal for	Connections	Illumination	Speed	Air volume
DH.WLCV1200	WLC-V1200 230 V	1200 mm	660 mm	610 mm	1280 mm	735 mm	1895 mm	HEPA filter: class 100, 0.3 μm particle removal 99.97%; pre-filter: 3-30 μm particle removal	Protection of samples and work processes against dust and particulate contamination	1 x air cock, 1 x gas cock, 2 x 230 V outlet	1 x UV 20 W, 1 x FL 36 W	Air flow: 0.3 - 0.6 m/s, air velocity control: 8 steps	1350 m2/h
DH.WLCV1500	WLC-V1500 230 V	1500 mm	660 mm	610 mm	1580 mm	735 mm	1895 mm	HEPA filter: class 100, 0.3 μm particle removal 99.97%; pre-filter: 3-30 μm particle removal	Protection of samples and work processes against dust and particulate contamination	1 x air cock, 1 x gas cock, 2 x 230 V outlet	1 UV 30 W, 1 x FL 55 W	Air flow: 0.3 - 0.6 m/s, air velocity control: 8 steps	1700 m2/h
DH.WLCV1800	WLC-V1800 230 V	1800 mm	660 mm	610 mm	1880 mm	735 mm	1895 mm	HEPA filter: class 100, 0.3 μm particle removal 99.97%; pre-filter: 3-30 μm particle removal	Protection of samples and work processes against dust and particulate contamination	1 x air cock, 1 x gas cock, 2 x 230 V outlet	1 UV 30 W, 1 x FL 55 W	Air flow: 0.3 - 0.6 m/s, air velocity control: 8 steps	2020 m2/h

Burette Automatic burette Schilling class B white graduated amber stained

short line graduation
DIN EN ISO 385
error ranges are better than the DIN EN ISO 385 requirements
with PE reservoir and stable base
push button for precise titration
automatic zero point
made of borosilicate glass 3.3

Artikelliste

Order number	Model	Version	Color	Material	Numeric division	Capacity	Accessories	Graduation	Class	Tolerance ISO	Tolerance witeg	DIN
3 312 005	Automatic burette	Schilling		Borosilicate glass 3.3	Strichteilung 0,02 ml	5 ml	with PE reservoir 500 ml and stable base	blue graduated	B	±0.04 ml	±0.04 ml	DIN EN ISO 385
3 312 010	Automatic burette	Schilling		Borosilicate glass 3.3	Strichteilung 0,05 ml	10 ml	with PE reservoir 500 ml and stable base	blue graduated	B	±0.05 ml	±0.05 ml	DIN EN ISO 385
3 312 015	Automatic burette	Schilling		Borosilicate glass 3.3	Strichteilung 0,1 ml	15 ml	with PE reservoir 1000 ml and stable base	blue graduated	B	±0.1 ml	±0.1 ml	DIN EN ISO 385
3 312 025	Automatic burette	Schilling		Borosilicate glass 3.3	Strichteilung 0,1 ml	25 ml	with PE reservoir 1000 ml and stable base	blue graduated	B	±0.1 ml	±0.1 ml	DIN EN ISO 385
3 312 050	Automatic burette	Schilling	amber stained	Borosilicate glass 3.3	Strichteilung 0,1 ml	50 ml	with PE reservoir 1000 ml and stable base	blue graduated	B	±0.1 ml	±0.08 ml	DIN EN ISO 385

Burette Automatic burette Schilling class B white graduated amber stained

short line graduation
DIN EN ISO 385
error ranges are better than the DIN EN ISO 385 requirements
with PE reservoir and stable base
push button for precise titration
automatic zero point
made of borosilicate glass 3.3

Artikelliste

Order number	Model	Version	Color	Material	Numeric division	Capacity	Accessories	Delivery time	Color-code	Graduation	Class	Tolerance	Tolerance ISO	Tolerance witeg	DIN
3 312 005 BR	Automatic burette	Schilling	amber stained	Borosilicate glass 3.3	Strichteilung 0,02 ml	5 ml	with PE reservoir 500 ml and stable base			white graduated	B		±0.04 ml	±0.04 ml	DIN EN ISO 385
3 312 010 BR	Automatic burette	Schilling	amber stained	Borosilicate glass 3.3	Strichteilung 0,05 ml	10 ml	with PE reservoir 500 ml and stable base			white graduated	B		±0.05 ml	±0.05 ml	DIN EN ISO 385
3 312 015 BR	Automatic burette	Schilling	amber stained	Borosilicate glass 3.3	Strichteilung 0,1 ml	15 ml	with PE reservoir 1000 ml and stable base			white graduated	B		±0.1 ml	±0.1 ml	DIN EN ISO 385
3 312 025 BR	Automatic burette	Schilling	amber stained	Borosilicate glass 3.3	Strichteilung 0,1 ml	25 ml	with PE reservoir 1000 ml and stable base			white graduated	B		±0.1 ml	±0.1 ml	DIN EN ISO 385
3 312 050 BR	Automatic burette	Schilling	amber stained	Borosilicate glass 3.3	Strichteilung 0,1 ml	50 ml	with PE reservoir 1000 ml and stable base	2 - 8 sec.	white	white graduated	B	±0.006 ml	±0.1 ml	±0.08 ml	DIN EN ISO 385

Graduated pipettes class B brown graduated

color-code to avoid confusion
made of soda-lime glass
zero point at the upper end of the scale
short line graduation
according to DIN EN ISO 835
our error ranges are largely better than the DIN EN ISO 835 requirements
calibrated to deliver (EX)
without waiting time
standard and special sizes available

Artikelliste

Order number	Model	Version	Material	Numeric division	Capacity	Delivery time	Color-code	Graduation	Class	Tolerance ISO	Tolerance witeg
3 500 011	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,01 ml	0.1 ml	2-3 sec.	white	brown graduated	B	±0.010 ml	±0.010 ml
3 500 021	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,01 ml	0.2 ml	2-4 sec.	black	brown graduated	B	±0.010 ml	±0.010 ml
3 500 022	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,002 ml	0.2 ml	2-4 sec.	white x2	brown graduated	B	±0.010 ml	±0.010 ml
3 500 051	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,01 ml	0.5 ml	2-11 sec.	yellow x2	brown graduated	B	±0.010 ml	±0.010 ml
3 500 101	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,01 ml	1 ml	2-11 sec.	yellow	brown graduated	B	±0.010 ml	±0.010 ml
3 500 110	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,1 ml	1 ml	2-11 sec.	red	brown graduated	B	±0.010 ml	±0.010 ml
3 500 201	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,01 ml	2 ml	2-12 sec.	white x2	brown graduated	B	±0.020 ml	±0.015 ml
3 500 202	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,02 ml	2 ml	2-12 sec.	black	brown graduated	B	±0.020 ml	±0.015 ml
3 500 210	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,1 ml	2 ml	2-12 sec.	green	brown graduated	B	±0.020 ml	±0.015 ml
3 500 505	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,05 ml	5 ml	5-14 sec.	red	brown graduated	B	±0.050 ml	±0.040 ml
3 500 510	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,1 ml	5 ml	5-14 sec.	blue	brown graduated	B	±0.050 ml	±0.040 ml
3 500 710	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,1 ml	10 ml	5-17 sec.	orange	brown graduated	B	±0.100 ml	±0.080 ml
3 500 810	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,1 ml	20 ml	9-21 sec.	yellow x2	brown graduated	B	±0.200 ml	±0.150 ml
3 500 910	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,1 ml	25 ml	9-21 sec.	white	brown graduated	B	±0.200 ml	±0.200 ml
3 500 950	Graduated pipettes	without waiting time	Soda-lime glass	Strichteilung 0,2 ml	50 ml		black	brown graduated	B		±0.400 ml

Dropping funnel 100ml 2 x ST 14/23 - 1 895 013

Dropping funnel, with pressure equalization, cylindrical, graduated, with Drip-Nozzle, ST-stopcock, , with screw thread retaining nut, 100:2ml, 2 x ST 14/23, bore: 2,5mm, Pack = 2 pcs

Specimen bottles 5 ml - 5 892 105

Specimen bottles, 5 ml, with thread GL 18, for tests, pills etc., Ø 20 mm, height: 41 mm, with screw caps made of PE, clear glass Case = 100 pcs.

2 From 5