The following products have been found matching your search "steckertyp": 137

Filter

6 From 6

No results were found for the filter!

Water purification system WWP.POWER

Ideal for:

production of pure and ultra-pure water

Features:

with pretreatment system
with RS232C interface and volumetric dispensing function with timer, level sensor included
2-phase-display for filter exchange
backlight LCD display
filter exchange message indicated by LCD display and blinking LED light
self-diagnosis for Ext- and Int-system, automatic cleaning, automatic sensor calibration
CE certified and unique serial number for tracing

Controller:

microprocessor controller: one-touch technology

Artikelliste

Order number	Model	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Flow rate	Product water quality	Water quality display	Filter composition
DH.WWP.POWER.S	WWP.POWER Scholar	395 mm	500 mm	470 mm	production of pure and ultra pure water	15 l/h	pure water: 0.2 - 250 μS/cm, ultra pure water: up to ≤18.3 MΩ x cm	pure water: 0.2 to 250.0 μS/cm, feed water: 10 to 100 μS/cm, temperature: 0 to 99.9°C	Pretreatment system HMC-PT-3, RO Pack, 0.2 μm final filter,UP Pack (scholar)
DH.WWP.POWER.U	WWP.POWER UV	395 mm	500 mm	470 mm	production of pure and ultra pure water	15 l/h	pure water: 0.2 - 250 μS/cm, ultra pure water: up to ≤18.3 MΩ x cm	pure water: 0.2 to 250.0 μS/cm, feed water: 10 to 100 μS/cm, temperature: 0 to 99.9°C	Pretreatment system HMC-PT-3, RO Pack, 0.2 μm final filter, UP Pack (S-UV), 254/185 UV lamp
DH.WWP.POWER.B	WWP.POWER Bio	395 mm	500 mm	470 mm	production of pure and ultra pure water	15 l/h	pure water: 0.2 - 250 μS/cm, ultra pure water: up to ≤18.3 MΩ x cm	pure water: 0.2 to 250.0 μS/cm, feed water: 10 to 100 μS/cm, temperature: 0 to 99.9°C	Pretreatment system HMC-PT-3, RO Pack, 0.2 μm final filter, UP Pack (BIO), MW 5000 UF filter (M)
DH.WWP.POWER.I	WWP.POWER Integrate	395 mm	500 mm	470 mm	production of pure and ultra pure water	15 l/h	pure water: 0.2 - 250 μS/cm, ultra pure water: up to ≤18.3 MΩ x cm	pure water: 0.2 to 250.0 μS/cm, feed water: 10 to 100 μS/cm, temperature: 0 to 99.9°C	Pretreatment system HMC-PT-3, RO Pack, 0.2 μm final filter, UP Pack (INT), 254/185 UV lamp, MW 5000 UF filter (M)

Freezer SWUF UniFreeze SmartLab 308/393/503/714/796 Liter -86°C

Ideal for:

ultra low refrigeration

Features:

CFC free refrigerant (R-404A)
UniFreez™ system
automatic vacuum breaker – easy to re- open door
external temperature sensor hole
block condenser removes filter & causes of related failure
filter-free mechanism lowers heat from the compressor
easy maintenance and improved performance
high-quality insulation panel and inner doors ensure defrosting around outer surface
easy monitoring and control – eye level controller
stainless steel interior, powder-coated steel body and inner door
3x stainless steel shelves to separate chamber into 4 sub-chambers included
castors for easy movement
UL/CUL, CE & RoHS certified and unique serial number for tracing

Safety mechanism:

push alarm service to your smartphone
sensor error detection
door locking system, door open error
door ajar and power failure alarm
standard warning and alarm functions

Controller:

Smart-Lab™ controller with 7" full touch screen TFT LCD:

WiRe™ app service, remote control system
variable program settings
self-diagnostic function
automatic data recording
data transfer to PC by USB memory
Internet connectivity with WiFi

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Shelves	Capacity	Compressor	Condenser	Refrigerant	Power consumption	Temperature range	Packing size	Sensor
DH.SWUF00400	SWUF-400 230 V	Max. rack quantity: 16 pcs. with 15 (3 x 5) placed racks (RFU4234)	600 mm	500 mm	1310 mm	840 mm	750 mm	1900 mm	Ultra low refrigeration	3 stainless steel shelves to separate chamber into 4 sub-chambers included	393 l	Hermetic type	Block condenser, no pin, filter-free	R-404A (CFC-free refrigerant)	373 W/h	-86°C to -65°C	116 x 116 x 222 cm	Temperature sensor PT100
DH.SWUF00500	SWUF-500 230 V	Max. rack quantity: 16 pcs. with 20 (4 x 5) placed racks (RFU4237)	600 mm	640 mm	1310 mm	840 mm	890 mm	1900 mm	Ultra low refrigeration	3 stainless steel shelves to separate chamber into 4 sub-chambers included	503 l	Hermetic type	Block condenser, no pin, filter-free	R-404A (CFC-free refrigerant)	458 W/h	-86°C to -65°C	116 x 124 x 222 cm	Temperature sensor PT100
DH.SWUF00700	SWUF-700 230 V	Max. rack quantity: 24 pcs. with 20 (4 x 5) placed racks (RFU4237)	880 mm	620 mm	1310 mm	1120 mm	870 mm	1900 mm	Ultra low refrigeration	3 stainless steel shelves to separate chamber into 4 sub-chambers included	714 l	Hermetic type	Block condenser, no pin, filter-free	R-404A (CFC-free refrigerant)	503 W/h	-80°C to -65°C	140 x 140 x 221 cm	Temperature sensor PT100
DH.SWUF00800	SWUF-800 230 V	Max. rack quantity: 28 pcs. with 20 (4 x 5) placed racks (RFU4257)	1000 mm	620 mm	1310 mm	1240 mm	870 mm	1900 mm	Ultra low refrigeration	4 stainless steel shelves to separate chamber	796 l	Hermetic type	Block condenser, no pin, filter-free	R-404A (CFC-free refrigerant)	588 W/h	-80°C to -65°C	150 x 140 x 221 cm	Temperature sensor PT100

Ultra low temperature Freezer SWUF-D DuoFreeze SmartLab 308/393/503/714 Liter -95°C

Ultra low temperature freezers from witeg

Ultra-deep cooling down to -95°C
especially suitable for vaccines

DuoFreeze SmartLab with 2 compressors: If one system fails, the other still cools down to -80°C

The witeg ultra low temperature freezer SWUF-D DuoFreeze SmartLab is available in 4 sizes of 308/393/503/714 liters.
All devices are UL/CUL, CE and RoHs certified. The 503 liter version is also GMP certified.
The witeg ultra low temperature freezers are characterized by safety and environmental friendliness and are an ideal basis, especially for vaccines in times of Corona.
Witeg ultra low freezers offer an optimal solution for storing vaccines that are now available to fight COVID-19. A number of safety devices guarantee absolute temperature stability during vaccine storage, which is supported by an optimized control system with automatic data recording, self-diagnosis function, remote control system with app service.
The ultra low temperature freezers from witeg can be easily operated via the TFT LCD full-touch screen and offer extensive storage and programming functions, which are essential when storing vaccines that are subject to cold chains.

Ideal for:

ultra low refrigeration
especially for vaccines

Features:

CFC free refrigerant (R-404A)
DuoFreeze™ with 2 compressors: when one system fails, the other still cools down to -80°C
automatic vacuum breaker – easy to re-open the door
external temperature sensor hole
block condenser removes filter & causes of related failure
filter-free mechanism lowers heat from the compressor
easy maintenance and improved performance
high-quality insulation panel and inner doors ensure defrosting around outer surface
easy monitoring and control – eye level controller
stainless steel interior, powder-coated steel body and inner door
3x stainless steel shelves to separate chamber into 4 sub-chambers included
castors for easy movement
UL/CUL, CE & RoHS certified and unique serial number for tracing
SWUF-D500 model is GMP certified

Safety mechanism:

push alarm service to your smartphone
sensor error detection
door locking system, door open error
door ajar and power failure alarm
standard warning and alarm functions

Controller:

Smart-Lab™ controller with 7" full touch screen TFT LCD:

WiRe™ app service, remote control system
variable program settings
self-diagnostic function
automatic data recording
data transfer to PC by USB memory
Internet connectivity with WiFi

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Shelves	Capacity	Compressor	Condenser	Refrigerant	Power consumption	Temperature range	Packing size	Sensor
DH.SWUF01400	SWUF-D400 230 V	Max. rack quantity: 16 pcs. with 15 (3 x 5) placed racks (RFU3040)	600 mm	500 mm	1310 mm	840 mm	750 mm	1900 mm	Ultra low refrigeration	3 stainless steel shelves to separate chamber into 4 sub-chambers included	393 l	2 compressors, hermetic type	Block condenser, no pin, filter-free	R-404A (CFC-free refrigerant)	Dual mode: 474 W/h; eco mode: 373 W/h	-95°C to -65°C	116 x 116 x 222 cm	Temperature sensor PT100
DH.SWUF01500	SWUF-D500 230 V	Max. rack quantity: 16 pcs. with 20 (4 x 5) placed racks (RFU50)	600 mm	640 mm	1310 mm	840 mm	890 mm	1900 mm	Ultra low refrigeration	3 stainless steel shelves to separate chamber into 4 sub-chambers included	503 l	2 compressors, hermetic type	Block condenser, no pin, filter-free	R-404A (CFC-free refrigerant)	Dual mode: 507 W/h; eco mode: 458 W/h	-95°C to -65°C	116 x 124 x 222 cm	Temperature sensor PT100
DH.SWUF01700	SWUF-D700 230 V	Max. rack quantity: 24 pcs. with 20 (4 x 5) placed racks (RFU50)	880 mm	620 mm	1310 mm	1120 mm	870 mm	1900 mm	Ultra low refrigeration	3 stainless steel shelves to separate chamber into 4 sub-chambers included	714 l	2 compressors, hermetic type	Block condenser, no pin, filter-free	R-404A (CFC-free refrigerant)	Dual mode: 596 W/h,; eco mode: 503 W/h	-90°C to -65°C	140 x 140 x 221 cm	Temperature sensor PT100

Shaker SHO, orbital motion, 10-300 rpm, 230x230/350x350 mm

Ideal for:

culturing cells to hybridization, staining and destaining gels, and combinatorial chemistry
hybridization, washing blots, culturing microbes

Features:

10 - 300 rpm
230x230 mm or 350x350 mm
digital LCD display
smooth start and change of shaking speed while operation
minimum noise
timer for 0-99 hours
multiple platforms and flask holder available
brushless DC motor
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
operation LEDs
overload protection
locking mode

Controller:

programmable Jog-Shuttle controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Controller	Moisture range	Speed	Plate size	Shaking motion	Temperature range	Packing size	Max. load
DH.WSO04010	SHO-1D 230 V	Amplitude: 10 mm	250 mm	330 mm	150 mm	Culturing cells to hybridization, staining and destaining gels, and combinatorial chemistry, hybridization, washing blots, culturing microbes	Digital, 6 programs, 10 steps	85% RH	10-300 rpm	230 x 230 mm	Orbital motion	at ambient temperature: +5 - 50°C	450 x 350 x h250 mm	8 kg
DH.WSO04012	SHO-2D 230 V	Amplitude: 20 mm	400 mm	480 mm	160 mm	Culturing cells to hybridization, staining and destaining gels, and combinatorial chemistry, hybridization, washing blots, culturing microbes	Digital, 6 programs, 10 steps	85% RH	10-300 rpm	350 x 350 mm	Orbital motion	at ambient temperature: +5 - 50°C	580 x 500 x h250 mm	10 kg

Shaker SHR, reciprocating motion, 10 - 300 rpm, 230x230/350x350 mm - DH.WSR04022

Ideal for:

culturing cells to hybridization, staining and destaining gels, and combinatorial chemistry
hybridization, washing blots, culturing microbes

Features:

10 - 300 rpm
230x230 mm or 350x350 mm
digital LCD display
smooth start and change of shaking speed while operation
minimum noise
timer for 0-99 hours
multiple platforms and flask holder available
brushless DC motor
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
operation LEDs
overload protection
locking mode

Controller:

programmable Jog-Shuttle controller with touch-button

Autoclave WAC-47/60/80 Liter 121°C with basket

Ideal for:

biotechnology, clinical, environmental, medical and food industry

Features:

stainless steel wire basket (2 pcs. included) and pressure vessel
powder-coated steel body
top loading sterilizer for loading of large working volume
thermal printer (record paper roll w58/ Ø 40 mm) (WAC-R)
solid and liquid mode
with casters for excellent mobility
digital backlight LCD display
digital timer function – delay time and operation time can be controlled
built-in recorder: print sterilization data (only WAC-R)
high-quality backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
automatic over pressure release valve & heat-protective lid
error alarm, power failure and temperature error
water low level detection
electronic door lock sensing system (locks the door over 80°C)

Controller:

digital fuzzy controller (fully automatic)

Artikelliste

Order number	Model	Version	Height (inner)	Diameter (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Pressure	Heating power	Capacity	Basket	Temperature range	Temperature accuracy	Packing size
DH.WAC05047P	WAC-47 230 V	Lever type sliding door/ safety electronic door closing system, PED (pressure equipment directive) certification	670 mm	Ø300 mm	700 mm	470 mm	1080 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	2000 W	47 l	Ø270 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	700 x 470 x 1,080 mm
DH.WAC05060P	WAC-60 230 V	Lever type sliding door/ safety electronic door closing system, PED (pressure equipment directive) certification	650 mm	Ø350 mm	700 mm	470 mm	1080 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	3000 W	60 l	Ø320 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	840 x 610 x 1252 mm
DH.WAC07080P	WAC-80 3 Phase	Lever type sliding door/ safety electronic door closing system, PED (pressure equipment directive) certification	650 mm	Ø400 mm	810 mm	580 mm	1140 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	2 x 2000 W	80 l	Ø370 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	950 x 730 x 1352 mm
DH.WACR2047P	WAC-R47 230 V	Lever type sliding door/ safety electronic door closing system, recorder-type: built-in recorder printer, sterilization cycle data (date, temperature, pressure, time, error status, etc.), PED (pressure equipment directive) certification	670 mm	Ø300 mm	700 mm	470 mm	1080 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	2000 W	47 l	Ø270 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	840 x 610 x 1252 mm
DH.WACR2060P	WAC-R60 230 V	Lever type sliding door/ safety electronic door closing system, recorder-type: built-in recorder printer, sterilization cycle data (date, temperature, pressure, time, error status, etc.), PED (pressure equipment directive) certification	650 mm	Ø350 mm	700 mm	470 mm	1080 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	3000 W	60 l	Ø320 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	840 x 610 x 1252 mm
DH.WACR3080P	WAC-R80 3 Phase	Lever type sliding door/ safety electronic door closing system, recorder-type: built-in recorder printer, sterilization cycle data (date, temperature, pressure, time, error status, etc.), PED (pressure equipment directive) certification	650 mm	Ø400 mm	810 mm	580 mm	1140 mm	Biotechnology, clinical, environmental, medical and food industry	1.2 kgf/ cm2 at 121°C / 2.0 kgf/ cm2 at 132°C, gauge: 0 - 3 kgf/ cm2	2 x 2000 W	80 l	Ø370 x 240 mm	Room temperature + 5°C - 132°C	±0.5°C to 121°C	950 x 730 x 1352 mm

Magnetic stirrer with hotplate MSH-500D digital 500°C 1500 rpm

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials
heat-sensitive procedures in microbiology and biochemistry
sample drying and general lab heating applications where high temperature is needed

Features:

up to 500°C
digital display with backlight
high-quality solid ceramic plate 200x200 mm
heat-, chemical- and acid-resistant
shade motor for 80-1.500 rpm
enormous strength of magnet
perfect heat uniformity from the inner to the edge
no liquid can get into the body
powder-coated aluminium body
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

hot top indicator lamp
high quality insulation (BTU)
timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Dial controller with touch-button for precise temperature control

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Power supply	Controller	Housing material	Speed	Heating power	Plate size	Plate material	Temperature control resolution	Temperature range	Temperature accuracy	Packing size
DH.WMH05020	MSH-500D Unit 230 V	Unit	205 mm	345 mm	135 mm	230 V, 50/60 Hz	Digital	powder-coated aluminium	80 - 1.500 rpm	850 W	200 x 200 mm	solid ceramic plate	0.1°C display, 0.5°C control	max. 500°C	±0,3°C	450 x 280 x 160 mm
DH.WMH04020	MSH-500D Set 230 V	Set	205 mm	345 mm	135 mm	230 V, 50/60 Hz	Digital	pulverbeschichtetes Aluminium	80 - 1.500 U/Min.	850 W	200 x 200 mm	solide Keramikplatte	Anzeige 0,1°C, Steuerung 0,5°C	max. 500°C	±0,3°C	450 x 280 x 160 mm

Hotplate HP-500D digital, 500°C

Ideal for:

sample drying and general lab heating applications where high temperature is needed

Features:

up to 500°C
digital display with backlight
high-quality solid ceramic plate 200x200 mm
heat-, chemical- and acid-resistant
perfect heat uniformity from the inner to the edge
no liquid can get into the body
powder-coated aluminium body
CE certified and unique serial number for tracing

Safety mechanism:

hot top indicator lamp
high quality insulation (BTU)
timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Dial controller with touch-button for precise temperature control

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Version with filter	Controller	Housing material	Heating power	Plate size	Plate material	Temperature control resolution	Temperature range	Temperature accuracy
DH.WHP05020	HP-500D Unit 230V	Unit	205 mm	345 mm	135 mm	rectangular	Digital	powder-coated aluminium	850 W	200 x 200 mm	solid ceramic plate	0.1°C display, 0.5°C control	max. 500°C	±0.3°C
DH.WHP04020	HP-500D Set 230V	Set	205 mm	345 mm	135 mm	rectangular	Digital	powder-coated aluminium	850 W	200 x 200 mm	solid ceramic plate	0.1°C display, 0.5°C control	max. 500°C	±0.3°C

Dry bath HB-48 one block, up to 150°C

Ideal for:

enzyme reactions, inactivation of sera, incubation and other laboratory procedures
multifunctional dry block heater

Features:

user‘s self-compensation function to offset between real temperature and indicated temperature (±10.0°C)
ergonomic design and modular block
interchangeable block (90 x 120 x 60 mm) for various tubes
molded heater (300W) for temperature accuracy
internal PPS bath ensures best insulation, block made of anodized aluminium
precise temperature control
digital timer function – delay time and operation control
block extraction tongs “BLE101” & block cover are included
storage function for the set values of temperature and timer
various kinds of blocks are offered (optional)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

digital fuzzy controller with Jog-Dial and main touch button

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Power consumption	Temperature range	Temperature accuracy	Packing size	Sensor
DH.WHB00348	HB-48 Unit 230V	-	90 mm	120 mm	60 mm	210 mm	309 mm	144 mm	approx. 5°C/min	300 W	ambient to +5°C to 150°C	±0.1 at 37°C, ±0.2°C at 90°C, ±0.4°C at 135°C	400 x 270 x 200 mm	Temperature sensor PT100
DH.WHB00349	HB-48 Set 230V	48 holes for 1.5/2 ml centrifuge tubes	90 mm	120 mm	60 mm	210 mm	309 mm	144 mm	approx. 5°C/min	300 W	ambient to +5°C to 150°C	±0.1 at 37°C, ±0.2°C at 90°C, ±0.4°C at 135°C	400 x 270 x 200 mm	Temperature sensor PT100

Midi magnetic stirrer, 100 - 2,500 rpm, max. 5 l stirring capacity (H2O) - DH.STIM018

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials

Features:

high performance brushless DC-motor: high efficiency stirring performance and precise speed control (minimize RPM fluctuation), low maintenance costs
speed range from 100 – 2,500 rpm
max. 5 l stirring capacity (H2O)
outstanding chemical resistance due to tempered glass plate (180 x 180 mm) and PP housing
dust- and splashproof
digital speed LED display
suitable silicone pad included, to prevent the sample for moving during use
30 mm stirrer bar included
CE certified and unique serial number for tracing

Controller:

electronically controlled motor for more capacity
digital PID control with Jog-Dial

Mini magnetic stirrer, 100 - 2,500 rpm, max. 2 l stirring capacity (H2O) - DH.STIM012

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials

Features:

high performance brushless DC-motor: high efficiency stirring performance and precise speed control (minimize RPM fluctuation), low maintenance costs
speed range from 100 – 2,500 rpm
max. 2 l stirring capacity (H2O)
outstanding chemical resistance due to tempered glass plate (120 x 120 mm) and PP housing
dust- and splashproof
digital speed LED display
suitable silicone pad included, to prevent the sample for moving during use
30 mm stirrer bar included
CE certified and unique serial number for tracing

Controller:

electronically controlled motor for more capacity
digital PID control with Jog-Dial

Overhead stirrer HT-DX pro, ultra high-torque, 10 - 550 rpm, 350,000 mPas / 800 Ncm, up to 100 liter H2O

Ideal for:

specialized for medium- to high-viscosity materials

Features:

maximum 100 liter
10 - 550 rpm
maximum viscosity 380,000 mPas / 800 Ncm
high-capacity brushless DC motor: high efficiency stirring performance and precise speed control (minimizes rpm fluctuation)
excellent planetary gear design ultra for high torque (11:1/60:1 ratio)
large size digital LCD display
smooth start and change of stirring speed while operation
low maintenance costs
CE certified and unique serial number for tracing

Safety mechanism:

over-current protection
overheat protection

Controller:

Jog-Dial controller with touch-button
can be used with optional digital remote controller and K-type temperature probe: torque value(Ncm)-/viscosity(mPas)-/temperature(° C) real time display

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Material	Ideal for	Controller	Torque	Moisture range	Speed	Capacity	Motor rating	Stirrer diameter	Power consumption	Temperature range	Viscosity (mPas)
DH.STIO0030	HT-DX pro unit 230 V	ultra high-torque	84 mm	205 mm	275 mm	aluminium die casting	specialized for ultra high-viscosity materials	digital PID control	800 Ncm	80% RH	10 - 550 rpm, gear max. 11:1/60:1 ratio	max. 100 l (H2O)	Input: 200W, Output: 180W	chuck grip capacity Ø 6 - 10 mm shafts, flex-couplings (Ø 6 - 16 mm)	250 W	ambient temperature 0 - 40°C	350,000 mPas
DH.STIO0130	HT-DX pro set 230 V	ultra high-torque	84 mm	205 mm	275 mm	aluminium die casting	specialized for ultra high-viscosity materials	digital PID control	800 Ncm	80% RH	10 - 550 rpm, gear max. 11:1/60:1 ratio	max. 100 l (H2O)	Input: 200W, Output: 180W	chuck grip capacity Ø 6 - 10 mm shafts, flex-couplings (Ø 6 - 16 mm)	250 W	ambient temperature 0 - 40°C	350,000 mPas

6 From 6