The following products have been found matching your search "tongs": 574

Filter

4 From 23

No results were found for the filter!

Staining jars according to Schiefferdecker Soda glass - 4 660 000

with glass box and cover
for 10 slides 76 x 26 mm

Bag-stopcock according to Schiff ST 14,5 - 0 276 002

Bag-stopcock, Schiff, ST 14,5, with hollow ST-plug, high vacuum, bore: 2,5 mm, 9 x 100 mm, after drawing

Bag-stopcock according to Schiff ST 18,8 - 0 276 004

Bag-stopcock ,Schiff, ST 18,8, with hollow ST-plug, high vacuum, bore: 4 mm, 10 x 110 mm

Bag-stopcock according to Schiff ST 21,5 - 0 276 006

Bag-stopcock, Schiff, ST 21,5, with hollowST-plug, high vacuum, bore: 6,3 mm, 13 x 120 mm

Bag-stopcock according to Schiff ST 24 - 0 276 008

Bag-stopcock, Schiff, ST 24, with hollow ST-plug, high vacuum, bore: 8 mm, 15 x 120 mm

Bag-stopcock according to Schiff ST 29,2 - 0 276 010

Bag-stopcock, Schiff, ST 29,2, with hollow ST-plug, high vacuum, bore: 10 mm, 18 x 120 mm

Bag-stopcock according to Schiff ST 34,5 - 0 276 012

Bag-stopcock, Schiff, with hollow ST-plug, high vacuum, bore: 12 mm, 20 x 120 mm

Hotplates HP-D digital up to 380°C

Ideal for:

sample drying and general lab heating applications

Features:

up to 380°C
digital display with backlight
ceramic-coated aluminium plate 180x180 / 260x260 mm
heat-, chemical- and acid-resistant
no liquid can get into the body
powder-coated body
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Shuttle controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Version with filter	Controller	Housing material	Heating power	Plate size	Plate material	Temperature control resolution	Temperature range with filter	Temperature accuracy	Packing size
DH.WHP03020	HP-20D unit 230 V	Unit	206 mm	307 mm	99 mm	rectangular	Digital	Powder-coated aluminium	600 W	180 x 180 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	400 x 280 x h200 mm
DH.WHP03021	HP-20D set 230 V	Set	206 mm	307 mm	99 mm	rectangular	Digital	Powder-coated aluminium	600 W	180 x 180 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	400 x 280 x h200 mm
DH.WHP03022	HP-30D unit 230 V	Unit	286 mm	387 mm	99 mm	rectangular	Digital	Powder-coated steel	1200 W	260 x 260 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	430 x 320 x h200 mm
DH.WHP03023	HP-30D set 230 V	Set	286 mm	387 mm	99 mm	rectangular	Digital	Powder-coated steel	1200 W	260 x 260 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	430 x 320 x h200 mm

Hotplates HP-A, analog, 70°C to 380°C

Ideal for:

sample drying and general lab heating applications

Features:

70°C to 380°C
digital display with backlight
ceramic-coated aluminium plate 180x180 / 260x260 mm
heat-, chemical- and acid-resistant
no liquid can get into the body
powder-coated body
CE certified and unique serial number for tracing

Safety mechanism:

operation LEDs

Controller:

PWM controller

Artikelliste

Order number	Model	Width (Outer)	Length (outer)	Height (outer)	Version with filter	Controller	Housing material	Heating power	Plate size	Plate material	Temperature control resolution	Temperature range with filter	Temperature accuracy	Packing size
DH.WHP03120	HP-20A 230 V	206 mm	307 mm	99 mm	rectangular	Analog	Powder-coated aluminium	600 W	180 x 180 mm	Ceramic-coated aluminium	control 0.5°C	70°C - 380°C	±0.3°C	400 x 280 x h200 mm
DH.WHP03121	HP-30A 230 V	286 mm	387 mm	99 mm	rectangular	Analog	Powder-coated steel	1200 W	260 x 260 mm	Ceramic-coated aluminium	control 0.5°C	70°C - 380°C	±0.3°C	430 x 320 x h200 mm

Hotplates HPLP digital big surface up to 350°C

Ideal for:

sample drying and general lab heating applications where a large surface is needed

Features:

up to 350°C
ceramic-coated aluminium plate 310x620 mm
heat-, chemical- and restricted acid-resistant
aluminium body
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

HPLP-C-P: Jog-Shuttle controller with touch-button
HPLP-C-R: Remote controller with touch-button

Artikelliste

Order number	Model	Width (Outer)	Length (outer)	Height (outer)	Version with filter	Controller	Housing material	Heating power	Plate size	Plate material	Temperature control resolution	Temperature range with filter	Temperature accuracy	Packing size
DH.WHP03024	HPLP-C-P 230 V	630 mm	360 mm	150 mm	rectangular	Digital	Aluminium	2000 W	310 x 620 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	350°C	±0.3°C	750 x 430 x h220 mm
DH.WHP03025	HPLP-C-R 230 V	630 mm	360 mm	150 mm	rectangular	Digital	Aluminium	2000 W	310 x 620 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	350°C	±0.3°C	750 x 430 x h220 mm

Magnetic stirrer with hotplate MSH-D digital, up to 380°C, 80-1,500 rpm

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials
heat-sensitive procedures in microbiology and biochemistry
sample drying and general lab heating applications where high temperature is needed

Features:

up to 380°C
shade motor for 80-1,500 rpm
digital display with backlight
ceramic-coated aluminium plate 180x180 / 260x260 mm
heat-, chemical- and restricted acid-resistant
no liquid can get into the body
powder-coated body
easy to clean
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs

Controller:

Jog-Shuttle controller with touch-button

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Power supply	Version with filter	Controller	Housing material	Speed	Heating power	Capacity	Plate size	Plate material	Temperature control resolution	Temperature range	Temperature accuracy	Packing size
DH.WMH03020	MSH-20D unit 230 V	Unit, brushless motor	206 mm	307 mm	99 mm	230 V, 50/60 Hz	rectangular	Digital	Powder-coated aluminium	80 - 1500 rpm	600 W	20 l	180 x 180 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	400 x 280 x h200 mm
DH.WMH03021	MSH-20D set 230 V	Set, brushless motor	206 mm	307 mm	99 mm	230 V, 50/60 Hz	rectangular	Digital	Powder-coated aluminium	80 - 1500 rpm	600 W	20 l	180 x 180 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	400 x 280 x h200 mm
DH.WMH03022	MSH-30D unit 230 V	Unit, carbon brush motor	286 mm	387 mm	99 mm	230 V, 50/60 Hz	rectangular	Digital	Powder-coated steel	80 - 1500 rpm	1200 W	20 l	260 x 260 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	430 x 320 x h200 mm
DH.WMH03023	MSH-30D set 230 V	Set, carbon brush motor	286 mm	387 mm	99 mm	230 V, 50/60 Hz	rectangular	Digital	Powder-coated steel	80 - 1500 rpm	1200 W	20 l	260 x 260 mm	Ceramic-coated aluminium	Display 0.1°C, control 0.5°C	380°C	±0.3°C	430 x 320 x h200 mm

Magnetic stirrer with hotplate MSH-A analog, 70°C to 380°C, up to 1500rpm

Ideal for:

mixing of chemical, laboratory and pharmaceutical materials
heat-sensitive procedures in microbiology and biochemistry
sample drying and general lab heating applications

Features:

70°C to 380°C
up to 1.500 rpm
ceramic-coated aluminium plate 180x180 / 260x260 mm
heat-, chemical- and restricted acid-resistant
no liquid can get into the body
powder-coated body
easy to clean
30 mm stirrer bar included
CE certified and unique serial number for tracing

Safety mechanism:

operation LEDs

Controller:

PWM controller

Artikelliste

Order number	Model	Version	Width (Outer)	Length (outer)	Height (outer)	Version with filter	Controller	Housing material	Speed	Heating power	Capacity	Plate size	Plate material	Temperature range with filter	Packing size
DH.WMH03120	MSH-20A 230 V	brushless motor	206 mm	307 mm	99 mm	rectangular	Analog	Powder-coated aluminium	1500 rpm	600 W	20 l	180 x 180 mm	Ceramic-coated aluminium	380°C	400 x 280 x h200 mm
DH.WMH03121	MSH-30A 230 V	carbon brush motor	286 mm	387 mm	99 mm	rectangular	Analog	Powder-coated steel	1500 rpm	1200 W	20 l	260 x 260 mm	Ceramic-coated aluminium	380°C	430 x 320 x h200 mm

Dry bath (Incubator) H-20 1 block up to 150°C

Ideal for:

enzyme reactions, inactivation of sera, incubation and other laboratory procedures
multifunctional dry block heater

Features:

user‘s self-compensation function to offset between real temperature and indicated temperature (±10.0°C)
ergonomic, compact design and modular block
internal PPS bath ensures best insulation, block made of anodized aluminium
precise temperature control
digital timer function – delay time and operation control
convenient integrated timer for time-sensitive incubations
block removal tool with screw thread included
storage function for the set values of temperature and timer
various block types (optional)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

digital fuzzy controller with Jog-Dial and main touch button

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Power consumption	Temperature range	Temperature accuracy	Packing size	Sensor
DH.WHB02000	H-20 Einheit 230 V		90 mm	120 mm	60 mm	226 mm	178 mm	138 mm	approx. 5°C/min	300 W	Room temperature +5°C to 150°C	±0.1°C at 37°C, ±0.2°C to 90°C, ±0.4°C at 135°C	230 x 290 x 245 mm	Temperature sensor PT100
DH.WHB02100	H-20 Set 230 V	incl. standard block with 48 holes for 1.5/2 ml centrifuge tubes	90 mm	120 mm	60 mm	226 mm	178 mm	138 mm	approx. 5°C/min	300 W	Room temperature +5°C to 150°C	±0.1°C at 37°C, ±0.2°C to 90°C, ±0.4°C at 135°C	230 x 355 x 245 mm	Temperature sensor PT100

Dry bath (Incubator) HB-96D 2 blocks up to 150°C

Ideal for:

enzyme reactions, inactivation of sera, incubation and other laboratory procedures
multifunctional dry block heater

Features:

user‘s self-compensation function to offset between real temperature and indicated temperature (±10.0°C)
unit made of stainless steel and powder-coated steel, block made of anodized aluminium
digital timer function
internal PPS bath ensures best insulation, block made of anodized aluminium
precise temperature control
block extraction tongs “BLE101” & block cover are included
storage function for the set values of temperature and timer
alarm function: error status and timer end
various kinds of blocks are offered (optional)
dual block and 2 molded heater (300W)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

dual digital fuzzy controller with Jog-Shuttle-switch

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Power consumption	Temperature range	Temperature accuracy	Packing size	Sensor
DH.WHB00198	HB-96D unit 230 V		90 mm	120 mm	60 mm	250 mm	285 mm	155 mm	approx. 5°C/min	600 W	Room temperature +5°C to 150°C	±0.1°C at 37°C, ±0.2°C to 90°C, ±0.4°C at 135°C	400 x 270 x 200 mm	Temperature sensor PT100
DH.WHB00199	HB-96D set 230 V	incl. 2 standard blocks with 48 holes for 1.5/2 ml centrifuge tubes	90 mm	120 mm	60 mm	250 mm	285 mm	155 mm	approx. 5°C/min	600 W	Room temperature +5°C to 150°C	±0.1°C at 37°C, ±0.2°C to 90°C, ±0.4°C at 135°C	400 x 270 x 200 mm	Temperature sensor PT100

Dry bath (Incubator) HB-R48 1 block -5°C up to 95°C

Ideal for:

enzyme reactions, inactivation of sera, incubation and other laboratory procedures

Features:

user‘s self-compensation function to offset between real temperature and indicated temperature (±10.0°C)
unit made of stainless steel and powder-coated steel, block made of anodized aluminium
2 peltier cooling modules
unit made of stainless steel and powder-coated steel, block made of anodized aluminium
block extraction tongs “BLE101” and block cover are included
molded heater (300W), PT100 sensor
storage function for the set values of temperature and timer
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

locking mode
overheat and over-current protection
sensor error detection

Controller:

digital PID and fuzzy controller with Jog-Shuttle-switch

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Cooling time	Heating time	Power consumption	Temperature range	Temperature accuracy	Packing size
DH.WHB00248	HB-R48 unit 230 V		90 mm	120 mm	60 mm	185 mm	230 mm	220 mm	2.3°C/min. between 95°C to 25°C, 0.5°C/min. between 25°C to -5°C	approx. 5°C/min	450 W	Room temperature -5°C to 95°C	±0.1°C at 37°C, ±0.2°C to 90°C	350 x 220 x 310 mm
DH.WHB00249	HB-R48 set 230 V	incl. standard block with 48 holes for 1.5/2 ml centrifuge tubes	90 mm	120 mm	60 mm	185 mm	230 mm	220 mm	2.3°C/min. between 95°C to 25°C, 0.5°C/min. between 25°C to -5°C	approx. 5°C/min	450 W	Room temperature -5°C to 95°C	±0.1°C at 37°C, ±0.2°C to 90°C	350 x 220 x 310 mm

Heating tapes WHM up to 250°C

Features:

two sizes with different lengths available
up to 250°C

Controller:

all heating tapes can be controlled by WHM-C10A or WHM-C10D controller.

Artikelliste

Order number	Model	Width (Outer)	Length (outer)	Controller	Power consumption	Temperature range
DH.WHM12311	WHM 230 V	13 mm	0.6 m	WHM-C10A or WHM-C10D	200 W	250°C
DH.WHM12312	WHM 230 V	13 mm	1.0 m	WHM-C10A or WHM-C10D	200 W	250°C
DH.WHM12313	WHM 230 V	13 mm	1.5 m	WHM-C10A or WHM-C10D	250 W	250°C
DH.WHM12314	WHM 230 V	13 mm	2.0 m	WHM-C10A or WHM-C10D	300 W	250°C
DH.WHM12315	WHM 230 V	13 mm	2.5 m	WHM-C10A or WHM-C10D	350 W	250°C
DH.WHM12316	WHM 230 V	13 mm	3.0 m	WHM-C10A or WHM-C10D	400 W	250°C
DH.WHM12321	WHM 230 V	25 mm	0.6 m	WHM-C10A or WHM-C10D	200 W	250°C
DH.WHM12322	WHM 230 V	25 mm	1.0 m	WHM-C10A or WHM-C10D	200 W	250°C
DH.WHM12323	WHM 230 V	25 mm	1.5 m	WHM-C10A or WHM-C10D	250 W	250°C
DH.WHM12324	WHM 230 V	25 mm	2.0 m	WHM-C10A or WHM-C10D	300 W	250°C
DH.WHM12325	WHM 230 V	25 mm	2.5 m	WHM-C10A or WHM-C10D	350 W	250°C
DH.WHM12326	WHM 230 V	25 mm	3.0 m	WHM-C10A or WHM-C10D	400 W	250°C
DH.WHM12327	WHM 230 V	25 mm	4.0 m	WHM-C10A or WHM-C10D	550 W	250°C
DH.WHM12328	WHM 230 V	25 mm	6.0 m	WHM-C10A or WHM-C10D	700 W	250°C

Incubators SWIR B.O.D. SmartLab 150/250/420/700 Liter 0 to +60°C

Ideal for:

animal and plant cell culture, constant temperature, germination test, BOD test, etc.

Features:

CFC free refrigerant (R-404A)
intelligent refrigerator control prevents compressor overload
superior temperature uniformity by forced-air convection
stainless steel chamber, powder-coated body
tempered glass door to observe samples during incubation
3x PE-coated steel wire shelves included
0°C - +60°C (refrigerated)
CE & UL/CUL certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker

Controller:

Smart-Lab™ controller with 4? full touch screen TFT LCD:

WiRe™ app service, remote control system
variable program settings
self-diagnostic function
automatic data recording
data transfer to PC by USB memory
Internet connectivity with WiFi

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Heating time	Shelves	Heating power	Capacity	Compressor	Refrigerant	Power consumption	Temperature variation	Temperature range	Temperature accuracy	Packing size	Recovery time	Sensor
DH.SWIR03150	SWIR-150 230 V	with Smart-LabTM controller, forced-air convection	505 mm	505 mm	610 mm	640 mm	832 mm	1313 mm	20 min. to 37°C, 20 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	700 W	150 l	190 W	R-404A (CFC-free refrigerant)	1600 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	900 x 1000 x 1650 mm	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.SWIR03250	SWIR-250 230 V	with Smart-LabTM controller, forced-air convection	505 mm	505 mm	1000 mm	640 mm	832 mm	1703 mm	20 min. to 37°C, 20 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	1000 W	250 l	250 W	R-404A (CFC-free refrigerant)	1800 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	900 x 1000 x 2040 mm	10 min. to 37°C, 12 min. to 50°C	Temperature sensor PT100
DH.SWIR03420	SWIR-420 230 V	with Smart-LabTM controller, forced-air convection	705 mm	605 mm	1000 mm	840 mm	932 mm	1753 mm	35 min. to 37°C, 35 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	1200 W	420 l	370 W	R-404A (CFC-free refrigerant)	2300 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	1100 x 1100 x 2140 mm	12 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100
DH.SWIR03700	SWIR-700 230 V	with Smart-LabTM controller, forced-air convection	800 mm	700 mm	1250 mm	935 mm	1027 mm	2000 mm	35 min. to 37°C, 35 min. to 50°C	3 PE-coated steel wire shelves included, total load 48kg (16kg per shelf)	2000 W	700 l	370 W	R-404A (CFC-free refrigerant)	2400 W	±0.5°C at 37°C, ±1.4°C at 50°C	0°C - +60°C	±0.2°C to 37°C	1220 x 1220 x 2260 mm	12 min. to 37°C, 15 min. to 50°C	Temperature sensor PT100

Incubators STH-E Growth chamber SmartLab 155/305/420/800 Liter -20°C up to 80°C, 95%

Ideal for:

growth of organisms, stability and endurance testing of materials

Features:

economical and practical type
CFC free refrigerant (R-404A) and automatic defrost system
powerful and silent dual fan motor
inner tempered glass door with silicone packing offers easy observation without door opening
stainless steel interior and powder-coated steel body
3x perforated stainless steel shelves included
CE certified and unique serial number for tracing

Safety mechanism:

push alarm service to your smartphone
overheat and over-current protection
sensor error detection and leakage breaker
low water level alarm lamp
high-low temperature protection
door ajar and power failure alarm

Controller:

Smart-Lab™ controller with 7" full touch screen TFT LCD:

WiRe™ app service, remote control system
variable program settings
self-diagnostic function and interactive temperature graph
automatic data recording and password protection
data transfer to PC by USB memory
digital calibration (offset function)
min-/max-temperature memory & program function

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Power supply	Moisture range	Heating power	Capacity	Compressor	Refrigerant	Temperature range	Temperature fluctuation	Temperature accuracy	Packing size	Humidity accuracy	Humidity stability	Sensor
DH.STHE0155	STH-E155 230 V	Not available in Europe	505 mm	505 mm	610 mm	745 mm	920 mm	1645 mm	Growth of organisms, stability and endurance testing	4400 W	30% - 95% RH	Temperature: 1500 W; humidity 2000 W	155 l	7/8 HP	CFC-free refrigerant	-20°C - +80°C	±1.0°C	±0.3°C	990 x 1120 x 1850 mm	±2% RH	±3% RH	Temperature sensor PT100
DH.STHE0305	STH-E305 230 V	Not available in Europe	620 mm	620 mm	800 mm	820 mm	1290 mm	1720 mm	Growth of organisms, stability and endurance testing	5700 W	30% - 95% RH	Temperature: 2000 W; humidity 3000 W	305 l	1.5 HP	CFC-free refrigerant	-20°C - +80°C	±1.0°C	±0.3°C	1220 x 1220 x 2050 mm	±2% RH	±3% RH	Temperature sensor PT100
DH.STHE0420	STH-E420 230 V	Not available in Europe	750 mm	660 mm	860 mm	990 mm	1075 mm	1885 mm	Growth of organisms, stability and endurance testing	6300 W	30% - 95% RH	Temperature: 2200 W; humidity 3000 W	420 l	1.5 HP	CFC-free refrigerant	-20°C - +80°C	±1.0°C	±0.3°C	1800 x 1800 x 2160 mm	±2% RH	±3% RH	Temperature sensor PT100
DH.STHE0800	STH-E800 230 V	Not available in Europe	1000 mm	800 mm	1000 mm	1200 mm	1075 mm	1920 mm	Growth of organisms, stability and endurance testing	8200 W	30% - 95% RH	Temperature: 2500 W; humidity 3000 W	800 l	3 HP	CFC-free refrigerant	-20°C - +80°C	±1.0°C	±0.3°C	1490 x 1320 x 2200 mm	±2% RH	±3% RH	Temperature sensor PT100
DH.STHE5155	STH-E155 3 Phase		505 mm	505 mm	610 mm	745 mm	920 mm	1645 mm	Growth of organisms, stability and endurance testing	4400 W	30% - 95% RH	Temperature: 1500 W; humidity 2000 W	155 l	7/8 HP	CFC-free refrigerant	-20°C - +80°C	±1.0°C	±0.3°C	990 x 1120 x 1850 mm	±2% RH	±3% RH	Temperature sensor PT100
DH.STHE5305	STH-E305 3 Phase		620 mm	620 mm	800 mm	820 mm	1290 mm	1720 mm	Growth of organisms, stability and endurance testing	5700 W	30% - 95% RH	Temperature: 2000 W; humidity 3000 W	305 l	1.5 HP	CFC-free refrigerant	-20°C - +80°C	±1.0°C	±0.3°C	1220 x 1220 x 2050 mm	±2% RH	±3% RH	Temperature sensor PT100
DH.STHE5420	STH-E420 3 Phase		750 mm	660 mm	860 mm	990 mm	1075 mm	1885 mm	Growth of organisms, stability and endurance testing	6300 W	30% - 95% RH	Temperature: 2200 W; humidity 3000 W	420 l	1.5 HP	CFC-free refrigerant	-20°C - +80°C	±1.0°C	±0.3°C	1800 x 1800 x 2160 mm	±2% RH	±3% RH	Temperature sensor PT100
DH.STHE5800	STH-E800 3 Phase		1000 mm	800 mm	1000 mm	1200 mm	1075 mm	1920 mm	Growth of organisms, stability and endurance testing	8200 W	30% - 95% RH	Temperature: 2500 W; humidity 3000 W	800 l	3 HP	CFC-free refrigerant	-20°C - +80°C	±1.0°C	±0.3°C	1490 x 1320 x 2200 mm	±2% RH	±3% RH	Temperature sensor PT100

Incubators SWGC Growth chamber SmartLab illumination 432/864 Liter 10°C to 60°C, 95%

Ideal for:

growth of organisms and plants, stability and endurance testing of materials, environmental simulations
stability product self-life QC testing

Features:

stability product self-life QC testing
3-sided light bank system: intensity of light is controlled by 8 levels and displayed on LCD
inner tempered glass door with silicone packing offers easy observation without door opening
PE-coated wire shelves included (4 or 8 acc. to model)
3-sided magnetic doors with light banks
stainless steel interior and powder-coated body
CE certified and unique serial number for tracing

Safety mechanism:

push alarm service to your smartphone
overheat and over-current protection
sensor error detection and leakage breaker

Controller:

Smart-Lab™ controller with 7? full touch screen TFT LCD:

WiRe™ app service, remote control system
variable program settings
self-diagnostic function and interactive temperature graph
automatic data recording and password protection
data transfer to PC by USB memory
digital calibration (offset function)
min-/max-temperature memory & program function

Artikelliste

Order number	Model	Version	Width (inner)	Length (inner)	Bore	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Thread	Ideal for	Cooling time	Heating time	Humidifier	Illumination	Shelves	Moisture range	Heating power	Capacity	Compressor	Refrigerant	Power consumption	Temperature range	Temperature fluctuation	Temperature accuracy	Packing size	Recovery time	Angle	Accessories	Humidity accuracy	Humidity stability	Sensor
DH.SWGC00450	SWGC-450 230 V	1 door, not available in Europe	650 mm	700 mm	14 x FPL 55 W, 0 bis 12.000 Lux "	1050 mm	850 mm	1090 mm	1965 mm	435 kg	Growth of organisms and plants, stability and endurance testing of materials, environmental simulations, stability product self-life QC testing	13 min. (0% illumination) / 15 min. (100% illumination)	11 min. (0% illumination) / 9 min. (100% illumination)	Evaporation by fan with heater	3 x light banks: left, right, front; 14 x FPL 55 W, 0 to 12000 Lux	4 PE-coated steel wire shelves (16 kg/shelf)	±1%	1500 W	432 l	370 W	R-404A (CFC-free refrigerant)	4800 W	10°C - +60°C	±0.5°C at 10°C, ±0.5°C at 25°C (0% illumination) / ±1°C at 10°C, ±1°C at 25°C (100% illumination)	±1°C at 20°C	1400 x 1220 x 2210 mm	3 min. to 10°C, 1 min. to 37°C (0% illumination); 5 min. to 10°C, 1 min. to 37°C (100% illumination)	"3 Min. bei 10°C, 1 Min. bei 37°C (0% Beleuchtung)	5 Min. bei 10°C, 1 Min. bei 37°C (100% Beleuchtung)"	±1%	±3% at 60°C	Temperature sensor PT100
DH.SWGC01000	SWGC-1000 230 V	2 doors, not available in Europe	1200 mm	790 mm	28 x FPL 55 W, 0 bis 15.000 Lux "	1050 mm	1200 mm	1150 mm	1965 mm	585 kg	Growth of organisms and plants, stability and endurance testing of materials, environmental simulations, stability product self-life QC testing	13 min. (0% illumination) / 15 min. (100% illumination)	11 min. (0% illumination) / 9 min. (100% illumination)	Evaporation by fan with heater	3 x light banks: left, right, front; 28 x FPL 55 W, 0 to 15000 Lux	8 PE-coated steel wire shelves (16 kg/shelf)	±1%	3000 W	864 l	750 W	R-404A (CFC-free refrigerant)	6500 W	10°C - +60°C	±0.5°C at 10°C, ±0.5°C at 25°C (0% illumination) / ±1°C at 10°C, ±1°C at 25°C (100% illumination)	±1°C at 20°C	1600 x 1500 x 2200 mm	3 min. to 10°C, 1 min. to 37°C (0% illumination); 5 min. to 10°C, 1 min. to 37°C (100% illumination)	"3 Min. bei 10°C, 1 Min. bei 37°C (0% Beleuchtung)	5 Min. bei 10°C, 1 Min. bei 37°C (100% Beleuchtung)"	±1%	±3% at 60°C	Temperature sensor PT100
DH.SWGC60450	SWGC-450 3 Phase	1 door	650 mm	700 mm	14 x FPL 55 W, 0 bis 12.000 Lux "	1050 mm	850 mm	1090 mm	1965 mm	435 kg	Growth of organisms and plants, stability and endurance testing of materials, environmental simulations, stability product self-life QC testing	13 min. (0% illumination) / 15 min. (100% illumination)	11 min. (0% illumination) / 9 min. (100% illumination)	Evaporation by fan with heater	3 x light banks: left, right, front; 14 x FPL 55 W, 0 to 12000 Lux	4 PE-coated steel wire shelves (16 kg/shelf)	±1%	1500 W	432 l	370 W	R-404A (CFC-free refrigerant)	4800 W	10°C - +60°C	±0.5°C at 10°C, ±0.5°C at 25°C (0% illumination) / ±1°C at 10°C, ±1°C at 25°C (100% illumination)	±1°C at 20°C	1400 x 1220 x 2210 mm	3 min. to 10°C, 1 min. to 37°C (0% illumination); 5 min. to 10°C, 1 min. to 37°C (100% illumination)	"3 Min. bei 10°C, 1 Min. bei 37°C (0% Beleuchtung)	5 Min. bei 10°C, 1 Min. bei 37°C (100% Beleuchtung)"	±1%	±3% at 60°C	Temperature sensor PT100
DH.SWGC61000	SWGC-1000 3 Phase	2 doors	1200 mm	790 mm	28 x FPL 55 W, 0 bis 15.000 Lux "	1050 mm	1200 mm	1150 mm	1965 mm	585 kg	Growth of organisms and plants, stability and endurance testing of materials, environmental simulations, stability product self-life QC testing	13 min. (0% illumination) / 15 min. (100% illumination)	11 min. (0% illumination) / 9 min. (100% illumination)	Evaporation by fan with heater	3 x light banks: left, right, front; 28 x FPL 55 W, 0 to 15000 Lux	8 PE-coated steel wire shelves (16 kg/shelf)	±1%	3000 W	864 l	750 W	R-404A (CFC-free refrigerant)	6500 W	10°C - +60°C	±0.5°C at 10°C, ±0.5°C at 25°C (0% illumination) / ±1°C at 10°C, ±1°C at 25°C (100% illumination)	±1°C at 20°C	1600 x 1500 x 2200 mm	3 min. to 10°C, 1 min. to 37°C (0% illumination); 5 min. to 10°C, 1 min. to 37°C (100% illumination)	"3 Min. bei 10°C, 1 Min. bei 37°C (0% Beleuchtung)	5 Min. bei 10°C, 1 Min. bei 37°C (100% Beleuchtung)"	±1%	±3% at 60°C	Temperature sensor PT100

Baths WCR Circulation water bath 8/12/22/30 Liter, -25°C down to 150°C ±0,1°C

Ideal for:

connection with evaporator

Features:

stainless steel bath, polyurethane insulation of 40 mm thickness and body made of powder-coated steel
innovated refrigeration system ensures temperature performance, includes intelligent control for preventing compressor overload, CFC-free (R-404A)
innovated powerful circulation pump ensures temperature uniformity: internal and external circulation and 5 steps circulation speed
stainless steel flat lid & valve ball included, dome lid optional
RS232C interface: remote monitoring and controlling with PC
proper liquid level tag in bath
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker
low liquid level warning and automatic stop function
locking mode

Controller:

digital fuzzy controller with Jog-Dial-switch (turn + push) & capacitive touch button

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Connections	Pressure	Heating power	Capacity	Effective space	Pump performance	Temperature variation	Temperature control resolution	Temperature range	Temperature accuracy	Packing size	Refrigerator	Cooling capacity	Sensor	Flow rate
DH.WCR00408	WCR-8 230 V	175 mm	320 mm	150 mm	330 mm	474 mm	752 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1000 W	8 l	175 x 153 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	560 x 420 x 922 mm	250 W	300 W at +20°C, 200 W at 0°C, 110 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCR00412	WCR-12 230 V	230 mm	350 mm	150 mm	400 mm	523 mm	807 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1500 W	12 l	230 x 181 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	630 x 530 x 972 mm	250 W	380 W at +20°C, 250 W at 0°C, 130 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCR00422	WCR-22 230 V	290 mm	390 mm	200 mm	483 mm	563 mm	850 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2000 W	22 l	290 x 220 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	670 x 615 x 1022 mm	370 W	680 W at +20°C, 500 W at 0°C, 300 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCR00430	WCR-30 230 V	330 mm	460 mm	200 mm	494 mm	633 mm	906 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2200 W	30 l	330 x 290 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -10°C	Display 0.1°C, control 0.1°C	-25°C - +150°C	±0.1°C	740 x 625 x 1072 mm	560 W	850 W at +20°C, 620 W at 0°C, 400 W at -20°C	Temperature sensor PT100	25l/Min.

Baths WCL Circulation water bath 8/12/22/30 Liter, -35°C down to 150°C ±0,1°C

Ideal for:

connection with evaporator

Features:

stainless steel bath, polyurethane insulation of 40 mm thickness and body made of powder-coated steel
innovated refrigeration system ensures temperature performance, includes intelligent control for preventing compressor overload, CFC-free (R-404A)
innovated powerful circulation pump ensures temperature uniformity: internal and external circulation and 5 steps circulation speed
stainless steel flat lid & valve ball included, dome lid optional
RS232C interface: remote monitoring and controlling with PC
proper liquid level tag in bath
user‘s self-compensation function to control difference between real temperature and indicated temperature (±10.0°C)
backlight LCD display
CE certified and unique serial number for tracing

Safety mechanism:

overheat and over-current protection
sensor error detection and leakage breaker
low liquid level warning and automatic stop function
locking mode

Controller:

digital fuzzy controller with Jog-Dial-switch (turn + push) & capacitive touch button

Artikelliste

Order number	Model	Width (inner)	Length (inner)	Height (inner)	Width (Outer)	Length (outer)	Height (outer)	Ideal for	Connections	Pressure	Heating power	Capacity	Effective space	Pump performance	Temperature variation	Temperature control resolution	Temperature range	Temperature accuracy	Packing size	Refrigerator	Cooling capacity	Sensor	Flow rate
DH.WCL00408	WCL-8 230 V	175 mm	320 mm	150 mm	400 mm	523 mm	807 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1000 W	8 l	175 x 153 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	630 x 530 x 972 mm	370 W	500 W at +20°C, 340 W at 0°C, 200 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCL00412	WCL-12 230 V	230 mm	350 mm	150 mm	400 mm	523 mm	807 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	1500 W	12 l	230 x 181 x 150 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	630 x 530 x 972 mm	370 W	530 W at +20°C, 370 W at 0°C, 210 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCL00422	WCL-22 230 V	290 mm	390 mm	200 mm	483 mm	563 mm	850 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2000 W	22 l	290 x 220 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	670 x 615 x 1022 mm	650 W	860 W at +20°C, 620 W at 0°C, 400 W at -20°C	Temperature sensor PT100	25l/Min.
DH.WCL00430	WCL-30 230 V	330 mm	460 mm	200 mm	494 mm	633 mm	906 mm	Connection with evaporator	External circulation nozzle: inner: Ø10.5mm, outer Ø12.5mm, for inner circulating: connect directly the in-/outlet nozzles	7.5 psi	2200 W	30 l	330 x 290 x 200 mm	25 l/min., max. lift: 4 m	±0.2°C to -20°C	Display 0.1°C, control 0.1°C	-35°C - +150°C	±0.1°C	740 x 625 x 1072 mm	750 W	1030 W at +20°C, 760 W at 0°C, 500 W at -20°C	Temperature sensor PT100	25l/Min.